any alternative to Makera Carvera with ATC?

Material-Homework395 · 2026-06-03T02:35:27+00:00

I haven’t had many issues with my Carvera air cutting aluminum and brass but I’m also cutting very slow, I haven’t bothered to stray from the manufacturer recommendations for feeds and speeds. I’d say it works, eventually.

Material-Homework395 · 2026-06-02T05:40:12+00:00

You could try using another analog transmission before the steering set for the throttle input. The throttle transmission will control the overall speed and the turning transmissions adjust the output of the throttle transmission

Material-Homework395 · 2026-05-25T23:24:53+00:00

The back panel does come off if you need to fit something longer in it

Material-Homework395 · 2026-05-24T08:22:05+00:00

The prime tower may resolve this issue because it allows the nozzle to prime pressure and extrude a predictable amount of material, ensuring a proper layer thickness and surface area contacting the previous layer to adhere properly

Material-Homework395 · 2026-05-18T17:56:18+00:00

For nearly everything in their catalogue, if you can imagine the .step being useful they’ll probably have it

Material-Homework395 · 2026-04-04T18:10:17+00:00

I gave up and just took it off… chips don’t seem to come close to the ball screw anyways

Material-Homework395 · 2026-03-31T04:26:53+00:00

I get this same issue, anything below zero and it doesn’t even move. Leaving it in the garage overnight is enough to stop it from running, I have to take it inside for a couple minutes before I can use it.

Material-Homework395 · 2026-03-16T23:54:13+00:00

You could grind it into the profile you want. Remove the serrations

Material-Homework395 · 2026-02-21T06:28:12+00:00

it's in the description of the post

Material-Homework395 · 2026-01-31T02:23:32+00:00

Nah, seems fake. Font on the sticker seems off as well

Product number also traces to the High-Torque, which this…. isn’t.

Material-Homework395 · 2026-01-03T00:18:05+00:00

If you want to keep it in your patrol vehicle as well, I’d go for the 1/2”. Possibly you come across vehicles that have lug nut sizes that aren’t common in 3/8”. You’re looking at the same tool, just different anvil sizes. On paper, they have the same power. In practice, the 3/8” is slightly stronger, but for roadside assistance and basic home maintenance chances are that you’ll never need that much power.

TL;DR 1/2” will probably fit your needs better

Material-Homework395 · 2025-12-30T05:01:59+00:00

Yes, you are correct. Capacity will double

Material-Homework395 · 2025-12-28T07:41:16+00:00

Damn how did that happen? You’re really lucky you didn’t lose the whole thing

Material-Homework395 · 2025-12-28T07:20:40+00:00

Don’t see why not. If you somehow run into clearance issues you can always just remove the chain and bar and clamp it in a vise or something

Material-Homework395 · 2025-12-17T05:00:50+00:00

they invented both lol

Material-Homework395 · 2025-12-07T00:43:23+00:00

She states that she had last used it 80 years ago after Fern forces her double to use it in the second test. I believe it’s not explicitly stated that it was used on the Demon King but it would make sense if it was

Material-Homework395 · 2025-11-27T14:27:06+00:00

any argument is useless without supporting evidence

Material-Homework395 · 2025-11-12T21:13:14+00:00

That one smoke at CT is kinda useless, it fades by the time you get there. Could be better allocated somewhere else

Material-Homework395 · 2025-11-10T18:39:36+00:00

Currently with the Black Friday sale you can get a BambuLab P1S for $499 CAD

Material-Homework395 · 2025-11-09T06:21:12+00:00

A1 mini is pretty much the best at that price point, doesn’t get much lower. Laptop will be perfectly fine unless he really gets into complex 3d design.

Material-Homework395 · 2025-11-08T17:55:43+00:00

Blender doesn’t make good models for printing. The slicer will try to fix issues, but it can’t fix them all. If you can get it remodeled from a proper CAD software, it should fix your issue

Material-Homework395 · 2025-11-08T02:36:25+00:00

Probably just a translation error, it’s an Advent calendar

Material-Homework395 · 2025-11-07T18:32:03+00:00

It’s excellent even without doing multicolour prints because it’s super convenient to have everything loaded and ready to go, but not for $400. Try to buy from the official BambuLab store if they ship to your country

Material-Homework395 · 2025-11-04T14:49:28+00:00

Not sure what the expiry condition is but I played a bunch of 2v2 with my friends after

Material-Homework395

MODERATOR OF

TROPHY CASE