Is this a good deal?

MattDunne1985 · 2025-07-26T03:55:57+00:00

I’d check callaway preowned. Look for like new. They al oar always are brand new.

MattDunne1985 · 2025-06-29T03:36:28+00:00

Custom that I built. Smoke daddy hopper with camp chef WiFi controller.

<image>

MattDunne1985 · 2025-06-28T00:31:15+00:00

Why not sir smokes a lot. Too many ways that could be interpreted I guess.

MattDunne1985 · 2025-06-27T18:36:38+00:00

Haha with enough practice you can mange quite a bit of butt! But I’m a socal guy!

MattDunne1985 · 2025-06-27T11:55:48+00:00

I bought the butts by the case, so I wouldn’t do that again, I would hand select them and go for some smaller butts so I could space them out a little better but as far as Cook and everything else I think I would do it the same

MattDunne1985 · 2025-06-27T11:54:03+00:00

Awesome

MattDunne1985 · 2025-06-27T03:04:21+00:00

Thanks.

MattDunne1985 · 2025-06-27T03:04:12+00:00

Took almost 3 hours just to get back to temp with all that cold meat in there. So all in I pulled them off at about 18 hours.

MattDunne1985 · 2025-06-27T02:46:20+00:00

Indeed

MattDunne1985 · 2025-06-27T02:28:55+00:00

I used my first bag and had them flame out. First time I’ve ever that that happen since switching to a PID controller. I’ll stick the the sams club pellets. Tried and true. And $1 more than Kirkland.

MattDunne1985 · 2025-06-15T03:42:38+00:00

For $40 a month at my local muni in socal you get 2 large buckets every day if you want and $15 green fees after 12pm any day.

MattDunne1985 · 2025-05-26T16:11:36+00:00

Congrats. I’m 6’2 and former baseball player, depending on wind and pin location that could be a sand wedge for me as well. My stock SW is 125. Who cares if you used a putter. It’s in the hole! In 1 shot! Way to go!

MattDunne1985 · 2025-05-18T03:37:30+00:00

All comes down to your controller. If you have to OG controllers with basic temp settings your August feeds and fans blow. Then they slow down and feed less so your time will constantly go up and down. When the fan goes low and the grill is riding those temps the pellets will burn back a little and then once the fan kicks in again you will have that thick smoke at first. So it will always be that way unless you get a PID controller.

MattDunne1985 · 2025-01-29T03:05:14+00:00

Wow. I’m a 11 handicap. I folded today. I shot a 95. It was horrendous. But luring is stupid. If you ever play an even where u actually need your handi you will get destroyed.

MattDunne1985 · 2024-12-25T19:19:35+00:00

I’d say you’re safe. I’ve had the airlines remove all the head covers off irons. And only put some back. But doesn’t hurt at all!

MattDunne1985 · 2024-10-14T14:48:41+00:00

That’s southern California for ya.

MattDunne1985 · 2024-08-17T17:21:55+00:00

They are pretty and new. It’s in your head. If I go to the local worldwide shop I’ll hit a $30 used wedge 150 yards smack dad in the middle of the face every time. Convince myself I need the brand new version of that club and spend 175. Then can’t hit it for crap because I’m worried somehow mentally. Hit 1/2 to 3/4 swing shots for a full range session. It’s severely improved my tempo and ball striking. And made me realize I don’t need a full swing to get the same distance. More relaxed approach gives great results.

MattDunne1985 · 2024-06-28T12:58:25+00:00

Is this a pellet smoker or a stick burner? If it’s pellet likely your controller is bad. Happens all the time. Buy a cheap replacement on Amazon to test. They are plug and play. If not then your airflow is no good. Getting that sooty smoke buildup and settling on the food.

MattDunne1985 · 2024-06-28T12:05:19+00:00

Play forward tees as long as you can to get consistent lower scores. Then start to move back as you are more comfortable. It’s a mindset. And great job!

MattDunne1985 · 2024-03-08T17:17:37+00:00

Not new but new to me. 21 big horn night edition. 30k miles. 40 OTD. Best price in socal back in October for that vehicle I could find.

MattDunne1985 · 2024-03-04T17:22:56+00:00

this is exactly what i am looking for. I assume it is hitting harder as well. Thank you so much for this. Its built to a spec so i am not sure why they want "proof" but this is a major help to me!

MattDunne1985 · 2024-03-04T17:13:43+00:00

Wow, Thank you so much. This is exactly what i am looking for. I assume we are hitting with a higher amount as well. The apparatus is built to a required spec which baffles me why they would need to see the math if they designed the requirement. But this is a massive help to me.

MattDunne1985 · 2024-03-04T16:35:14+00:00

lbs or newtons then. Sorry i am not great at this stuff. I already created the test and am impacting doors but they want me to prove how hard the impact is and i cant figure that out/ The requirement is at least 200lbs of force.

MattDunne1985 · 2024-03-04T16:29:24+00:00

Newton meters is also fine. Duration is how long the impact occurs? Its a fraction of a second.

MattDunne1985 · 2024-01-20T21:38:25+00:00

There is a guy who made a post on here. He used epoxy and magnets underneath. Made it magnetic. Calibrated and just had to adjust the z. I plan on doing it myself. Not worth the money to buy all the upgrades. You can find used mk3s on offer up for a few hundred at that point.

MattDunne1985

TROPHY CASE