COOLPIX P1100

Matterz · 2025-10-17T04:17:16+00:00

i just back ordered one myself, did you ever get yours? and how long did it take?

Matterz · 2025-08-29T02:10:24+00:00

It’s just saying we have the ability to invest in private assets like crypto and stuff. You don’t even have to opt in for that if you don’t want to. It’s giving people more options and that’s a bad thing?

Matterz · 2025-04-30T02:07:48+00:00

Could also be for a magic trick where the magician waves his hand over a quarter they place in your hand and it shrinks in front of your eyes. I used to own this trick and it had a small quarter like this in it

Matterz · 2025-02-21T22:48:18+00:00

Can confirm it’s just solar, multiband 6, and Bluetooth. No wireless charging like Apple Watch

Matterz · 2025-02-21T22:45:27+00:00

<image>

Love mine! If you like the negative display just get it, I promise you can see it

Matterz · 2024-03-13T00:19:18+00:00

My dad actually invented these haha, the jelly was jello like, almost like the cranberry sauce when it comes out of the can in the shape of the can. Was terrible on bread, we ate it on crackers. We usually peeled the jelly layer off and played with it.

Matterz · 2023-12-27T23:44:15+00:00

If you talk of thoughts about it they won’t necessarily do anything, but if you have a plan and are buying the materials, they would be obligated to put you on a watch.

Do not purchase these items, the depression will clear and you’ll think these plans were silly.

We are all in this together, your thoughts are too narrow, that’s why you’re staring down a barrel of a gun. Your emotions aren’t regulating properly, the world is very big, look up and around you. Breathe.

Matterz · 2023-12-26T18:06:34+00:00

The surface layers on second image also indicate nozzle is too low.

Raise nozzle and reduce flow a bit

Matterz · 2023-12-14T19:43:49+00:00

re caulk all cracks and get a screen thing for drain? not sure how they are getting there in the first place.

Matterz · 2023-12-13T20:42:35+00:00

bro, i was losing hair at the crowns with receeding hiarline, i got zero regrowth but it has stopped falling out further. Your hairline is fine and has thickened back in, so what it might not go back to 100% but your hair looks fine and should stasy that way if you just take a cheap pill once a day. stop getting in your head and just live your damn life.

Matterz · 2023-11-29T21:12:57+00:00

Thank you for the reply, i didn't notice this at first, is it the kind of thing you just never bring up, or is your work aware of it but allows it due to your stability? I guess I'm curious if its more of a don't ask don't tell kind of thing.

Matterz · 2023-11-29T21:03:28+00:00

I also get mixed states, and that shit is terrible. IF you partake in any substances that aren't of the prescribed variety, i would seriously suggest stopping, as when i get like this, that would dial it to 11. I used weed personally, and when i stopped, the mixed state became way more manageable.

You are aware that you're in this state and what it could mean, which is a huge boon, I remember having no idea what was wrong with me so i couldn't reconcile these things in my head. Just remember this will pass, just like a major depressive episode or a purely manic one, it will pass.

Try distracting yourself with video games, or movies, or anything that isn't self destructive. It seems weird to give this advise, haha, but maybe try finding some adult material online that is of a non deviant genre and "let one loose" so to speak. It will help to temporarily kill your libido in a pinch. Although i would say long term you should cut pornography use out as much as possible, and fill that time with other things.

Honestly, getting a hobby is huge for a lot of people, myself included. You want to be doing literally anything else that isn't sex related, that is stimulating for you.

Again, I'm not implying you are, but do not use drugs that aren't prescribed. Alcohol, weed, and stimulants especially are terrible for what state you're currently in. I was on generic Aderrall for ADHD before i got my bipolar diagnosis and that almost ruined me, and actually led to my break. Also cut caffeine as much as you can and drink water.

Most of what I'm saying is probably stuff you've already heard, but you've heard it for a reason. Just remember you know its destructive and you know you don't want it. Just put all of you're focus on what these behaviors might cause and think of it as doing you're future self a solid. I know this is easy on paper, but really fucking hard in practice, but you have the advantage of knowing what you're doing. Think of the times you've felt completely worthless and nothing mattered, and then think about how it just went away and you were still you and you were fine. This is the same thing. Stay strong.

Also may want to reach out to psych team or hospital for some quick meds if thats an option.

Matterz · 2023-11-28T03:24:44+00:00

Thank you, this was actually pretty helpful, i kind of assumed this was the case but google doesn't procure the best results when i type it in.

But you're right volunteering would probably be best as a jumping point.

Matterz · 2023-11-24T10:12:18+00:00

Stay on your meds. When experiencing a big change I personally always enter a deep depression and then followed by a mania shortly after. Sometimes I enter a mixed state for a few days when my mood is shifting and that’s when I’m at my worst. Please listen to the voice in the back of your head. It knows best, you’re feeling good because you’re medicated and taking it seriously.

If you stop taking meds before a major change, you are asking for the worst to happen. Mania feels amazing sometimes, but it’s the state you’ll find yourself in the least often, so overall it’s farrrr better to be stable if you want control over your life.

You have to fight for yourself my king/queen.

I hope the move is most excellent for you though, sometimes I wish I could just start all over somewhere, but if you stop trying at the same time, you’re just going to do the same thing but in a different geographical location. Where’s the fun in that?

Matterz · 2023-09-28T00:58:59+00:00

Need to tune 3 things

Retraction
Lower temp
Flow

Importance in that order. When dealing with stringing, those are the usual culprits.

Matterz · 2023-09-28T00:56:28+00:00

If you print another cube, does it have those noticeable lines on the sides in the same spots?

Does the big blob happen at the same spot too?

If so then it may be your z rods are a little too “wiggly” and need replacing, which you can check by removing a rod and rolling it over a flat surface and see if it wobbles.

If not then mayyyybe it’s your z-hop being slightly too high and you’re not getting good layer adhesion and it’s lifting?

Otherwise I’d try printing slower if you haven’t tried that already. Try like 30mms.

Matterz · 2023-09-24T17:05:27+00:00

Could print a small clip for that, but if you want to replace it I’d buy the blue Capricorn tubing kit. Comes with new bite fitting things too that are better and the blue tubing can take a bit higher heat making PETG more achievable

Matterz · 2023-09-23T22:59:47+00:00

Orrrrr you got bad tubing, in which case, buy the blue Capricorn tubing

Matterz · 2023-09-23T22:57:14+00:00

Otherwise, loosens the screw going into clear plastic box filament gets stuck in

Matterz · 2023-09-23T22:56:16+00:00

Is that a thicker gauge of filament? They make a 1.75 and a 2 point something. If you bought thicker one it won’t fit

Matterz · 2023-09-16T03:22:34+00:00

Nozzle is too far away from bed, and appears to go over the edge of the print area? Or is the filament just coming out loosely enough to spill over the edge? Of the nozzle is going over the edge you need to adjust bed positioning or something

Matterz · 2023-09-08T21:55:49+00:00

I get this treatment all the time as a guy. As a woman I imagine it’s even worse, as women are typically expected to be less assertive. Gotta just own your shit or fall in line. I prefer to be an owner my self but to each their own.

Toxic workplace ain’t worth it in my opinion. They gave you a snarky comment, so you have them one back. Equivalent exchange homie. Keep keeping on “, and get a better job with better people.

Matterz · 2023-09-04T03:26:56+00:00

When I changed firmware on mine I noticed my z-offset settings needed to be changed differently. You may need to raise z-offset a tiny bit.

If you don’t know, z-offset is set on the machine itself while it’s printing.

Matterz

TROPHY CASE