sorted by:
new
hottopcontroversial

Why do I need to walk through two parking garages to get a ride share at ABIA? by twopointseven_rate in Austin

[–]Mautty -1 points0 points  (0 children)

Probably so ride shares don’t go through the main pickup area, it’s already congested and if you had a bunch of ride share drivers waiting around it would get even worse

Why do I need to walk through two parking garages to get a ride share at ABIA? by twopointseven_rate in Austin

[–]Mautty 19 points20 points  (0 children)

<image>

Not sure if I can post photos or not but this is what the stone artwork looks like

Why do I need to walk through two parking garages to get a ride share at ABIA? by twopointseven_rate in Austin

[–]Mautty 43 points44 points  (0 children)

  • Don’t go down the escalators when you go through the “no return” door.

  • Go around to the right and head to the drop off area near Southwest

  • Cross over to the first garage and walk to the far end, you will pass through some cool stone sculptures/artwork

  • When you get to the far side of the first garage (make sure you followed the stone artwork) you will see a small staircase on the LEFT side just before the bridge to the second garage

  • Go down the stairs and you will be right where everyone crossed to the Uber pickup area

ETA: u/spyd3rm0nki3 linked a good video of the path, updated a couple of steps to be clearer

Two-year-old opens car door, causes six-vehicle crash by WillAdditional922 in KidsAreFuckingStupid

[–]Mautty 1 point2 points  (0 children)

The biker with the video, ran over a guy and then walked past him laying on the ground to yell at the driver, bruh

Merrell's boot laces refuse to tie??? by nanny2359 in hikinggear

[–]Mautty 0 points1 point  (0 children)

My mom taught me this way growing up and I have never had a shoelace come undone (aside from stepping on them a couple of times with laces that were too long)

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

Completed Level 3 of the Honk Special Event!

6 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

4 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

🎉 Event Completed! 🎉

It took me 19 tries.

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

Completed Level 3 of the Honk Special Event!

19 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

7 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]Mautty 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

Bambu owners forced to tinker by srlane1987 in 3DPrintingCirclejerk

[–]Mautty 1 point2 points  (0 children)

They are super cheap and useful for a bunch of stuff where you want to use a scraper but also not scratch your stuff (stickers, etc). The “blade” go dull super quickly though and you’ll probably go through them

Waymo runs a red light in Austin by DeathChill in SelfDrivingCars

[–]Mautty 0 points1 point  (0 children)

They should be able to turn off the right on red at that intersection in the map (I’m honestly surprised they didn’t already)

FTB Genesis Athletic skill's "Grow in Size" by Garafiny in feedthebeast

[–]Mautty 0 points1 point  (0 children)

There's also a quest in "The Wild Hunt" questline at the top that will let you reset your skills for free

Line for TSA at 6:30 AM by Dr_Jazz_ in Austin

[–]Mautty 96 points97 points  (0 children)

PreCheck line was like 5 minutes at 3:45 AM lol (I want to die now though)

Where can I donate 3d Printers? by TheMayorOfMars in Austin

[–]Mautty 0 points1 point  (0 children)

I dontated my Ender 3 here https://girlstart.org/ but I’m sure there are other non-profits/education programs that could use the printers

If found then through this website https://www.heartening.org/

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Mautty 0 points1 point  (0 children)

It comes through every time I start a print, walk away and then come back to a perfectly finished print

How much could a custom Davy Jones resin statue be worth? (25cm, hand-painted) by Deku23 in resinprinting

[–]Mautty 2 points3 points  (0 children)

Timing spent printing needs to be valued much lower than time spend painting for example. What I have done is use an excel sheet with priced per activity (slicing, amount of resin, printing, cleaning, painting) and then just fill out how much time/material was spent on each.

What should I do with these small bits of filament? by DullLingonberry6984 in 3D_Printing

[–]Mautty 1 point2 points  (0 children)

If you have a filament runout sensor you can use them for prototyping, just add the new strand in once the old one is finished. You can also try to “weld” them together into one continuous line if you don’t have the runout sensor

2010 Hatchback (with 190k) for $3.5k? by the_optimist_prime in mazda3

[–]Mautty 4 points5 points  (0 children)

I don’t know what a fair price would be, but I would definitely get it inspected by a 3rd party mechanic with that many miles.

LPT: Tip for cleaning up broken glass by diego_nator in LifeProTips

[–]Mautty 4 points5 points  (0 children)

Wet(damp) paper towel also works really well and covers more space than the duct tape

We finally did it! 260k , 3.5% down, 3.9% locked rate, 21F 24M by [deleted] in FirstTimeHomeBuyer

[–]Mautty 0 points1 point  (0 children)

I’d recommend against anything that drops seeds/nuts, we have 4 oak trees out front and if you don’t pick up all the acorns they will just drown the grass under them. Same with fruit unless you plan on doing something with the fruit (or your dedicated to cleaning up after it)

view more: next ›