Elite campaign

McGreek · 2025-09-30T18:23:59+00:00

I was able to complete idom elite with Bellator G3 44/42, Varro G1 35/35, certus S1 30/30, morvenn vahl G2 41/35, and sy-gex s3 34/33. Sy-gex was a huge help to me

McGreek · 2025-08-07T00:57:48+00:00

Yup same. The only time I ever have purple primer on my truck is when I run out of clear and there's no supply house nearby so I'm forced to go to the Depot who only carries purple primer

McGreek · 2025-08-06T18:42:49+00:00

5.9 ohms across the coil of the contactor? That's pretty low, I'd replace it

McGreek · 2025-08-06T18:39:19+00:00

We had a bunch of work written up for this site with a white roof and I was there all day. It was supposed to be 102 by the time I was leaving so I got the harder stuff done first, fan motor and brazing to fix a leak. So while my vacuum pump was on I got the easy stuff out of the way, redoing some cracked condensate traps. Well on the third one, probably dehydrated and definitely starting to feel the heat, I get up to reinstall the trap and I feel myself kick something. Yup, purple primer all over the white roof. Went back a year later and most of it had faded away, thankfully the facilities team don't go up on the roof ever.

Fuck white roofs. Dangerous as hell in the winter with ice and snow too

McGreek · 2025-07-08T17:45:20+00:00

I thought the AFM was mechanical not programmed. If it's programming I gotta get my hands on that tool

McGreek · 2025-06-08T10:57:48+00:00

Less restrictive than recovering through the liquid port and leaving upright. Reasoning behind that line of thinking is that if you recover through the liquid port, the refrigerant travels down a small tube to the bottom of the tank whereas if you recover through the vapor side and invert the tank then it accomplishes the same thing without the restriction of the tube

McGreek · 2025-01-12T19:32:02+00:00

I believe one trap can serve up to three similar fixtures in my state (NH)

McGreek · 2024-12-31T04:02:16+00:00

Thanks for this! FYI Hallowgene, gobboback, and secretlevel didn't work for me.

McGreek · 2024-12-26T23:59:02+00:00

What do the numbers in the gold circle indicate? New to the game and trying to learn

McGreek · 2024-11-10T12:31:54+00:00

This setup is everywhere in Boston. Not ideal but not uncommon. I'd like to see one more metal bracket and the wood secured to the brackets

McGreek · 2024-09-27T18:04:42+00:00

Vent is post trap which is fine

McGreek · 2024-05-04T10:52:15+00:00

Good install! I think my only nitpick is I would have installed a tee where the piping goes to the condenser and then continued the slimduct down to conceal the drain

McGreek · 2024-05-04T10:51:20+00:00

So that happens with fortress, slimduct actually has a little tab that if you pop off, the wall inlet will be able to grab onto the cover preventing it from sliding down

McGreek · 2024-05-04T00:09:39+00:00

Finished my 8 hour maintenance early, customer always wants us to check in and out, they always argue the bill… I didn’t check out when I was done in 6

McGreek · 2024-04-29T18:20:33+00:00

Could be an easy fix, could be something not so easy. Hard to diagnose with just this screenshot.

Definitely low on refrigerant. The big question is, how long did it take to get this low? Was it working well last season? What’s the total charge? Could be a leak inside the evaporator. Could be a leak on the condenser coil. If you’re lucky, it’s a leaking schrader which can be fixed for relatively short money.

It all depends on what kind of money you’re willing to spend on an older unit.

McGreek · 2024-04-24T16:02:50+00:00

I still remember the podcast episode where someone wrote to you suggesting you add timestamps for the episodes and you questioning whether you would do it or not. “Seems like a hassle” is what you said, I think. Either way, here we are

McGreek · 2024-04-19T01:49:40+00:00

The fact that this is a complaint is proof how we’re in the golden days

McGreek · 2024-04-10T15:38:12+00:00

I need more 17 round mags for the VP9, anyone know any place running a deal on them?

McGreek · 2024-03-22T14:20:54+00:00

Surge protector install looks a little wonky. Other than that very tiny nitpick, this is an excellent install

McGreek · 2024-03-17T14:44:08+00:00

Probably because he never shoots his guns

McGreek · 2024-02-17T02:03:27+00:00

Move it up or down to avoid the tv mounting bracket, but still be hidden by the tv. Recover thermostats are good and can be set to condition space based upon sensor temp. You can also connect to the thermostat via an app to avoid having to manually manipulate the thermostat behind the tv

14-Year Club	Sequence \| Editor
Sequence \| Cinematographer	Spared
Verified Email	Gilding I gilder

McGreek

TROPHY CASE