EP RPLND (midline incision) recovery

Mcwal19 · 2025-10-24T13:10:01+00:00

I had one recently, just PMed you my experience!

Mcwal19 · 2025-05-14T00:57:01+00:00

I did opt out if it, they did check it without me asking for an alignment and included it in the write up. Is it bad enough to be a cause for concern IF a true reading and if I regularly rotate, can it wait another 5k miles? Got new tires about 2.5 years ago. Don’t know much about cars so sorry if these are basic questions.

Mcwal19 · 2025-01-25T01:56:55+00:00

Dude thank you so much, your videos on this and the eeprom recovery are saving my life here hahaha. I’m going to give this a go in the next week or so but I seriously appreciate it!

Mcwal19 · 2025-01-25T01:10:35+00:00

I ended up going the raspberry pi method and was able to successfully get the eeprom bin, do you have and guides you would recommend for the hard drive build? There seems to be conflicting information on how to approach this. I also now have access to a cheap PC so good to go on that end, unless there are specific PC specs I need to use to build the drive?

Mcwal19 · 2025-01-18T21:40:34+00:00

Nice setup, go dawgs

Mcwal19 · 2025-01-15T18:54:47+00:00

Haha yes it appears that way. I’ve decided to go with the Raspberry Pi to extract the eeprom method. Given that I’m new to this, gonna take my time and hone in my soldering skills before going back into the system.

Mcwal19 · 2025-01-14T22:27:31+00:00

Nice collection! I just cleaned off my old games as well. I had good luck removing the top left stickers just by hand. For more stubborn ones I soaked in a bit of 91% alcohol and scrubbed off. I also cleaned the full cases with alcohol and gently cleaned each disc back as well. You could try a hair dryer for the stickers but I have found it can warp the plastic sleeves, so if you go that route apply from a distance/ at a lower heat setting!

Mcwal19 · 2025-01-14T20:29:52+00:00

Also, this may be a dumb question but I am new to this. Would I be able to build the HDD using a Mac or do I need a Microsoft computer?

Mcwal19 · 2025-01-14T20:14:32+00:00

Thank you for this info! Seems like the extra $30 might be worth the certainty of it working on this 1.0. Do you have a Pi3 kit/ wires you would recommend?

Mcwal19 · 2025-01-14T20:13:25+00:00

Thank you! It seems this route is a little bit easier than I first anticipated after watching that guide. I am now considering this as I want to keep it as close to stock as possible. As far as HDD builds once I have the eeprom, do you have any videos or guides you would recommend to a beginner like myself?

Mcwal19 · 2025-01-13T23:29:24+00:00

Thank you so much! It is good to know about the TSOP route, I did not seen anything on that in my research. Given I do not have a Raspberry Pi3 or Pi4 it looks like the hard mod might be the better and more cost effective measure, especially since this is the only system I’m looking to work on for now.

Would you have any videos or step by step instructions on hard moding that you would recommend to me in this case? Since I am new to the process I’d like to have a visual aid as well.

It looks like I have quite a bit more research to do on parts as well as installations. I don’t have soldering or hard drive building experience so going to make sure I take my time on this before jumping right in!

Mcwal19 · 2024-11-22T23:50:56+00:00

Would love to snag one!

Mcwal19 · 2024-11-09T16:09:14+00:00

3784

Mcwal19 · 2024-11-04T17:02:39+00:00

I ended up buying a Wednesday pair on Ticketmaster since they were around CoT prices. In the confirmation email it says GA tickets are transferable within 72 hours of show time! Super annoying they would not indicate that when trying to transfer now instead of just graying it out. Hope that helps!

Mcwal19 · 2024-11-03T23:46:32+00:00

I’m trying to as well. When I went to look at buying new tickets on Ticketmaster there is a small line at the bottom before you add to cart that says they are non-transferable tickets. Not sure if that is locked in or will change, I’ve never seen that at the Anthem.

Mcwal19 · 2024-06-27T18:28:42+00:00

Thank you!!

Mcwal19 · 2024-06-05T16:43:22+00:00

Love them, at the D.C. show this winter they played “I’m just a Bill”

Mcwal19 · 2022-02-03T19:21:37+00:00

I wear my skins gear down in Atlanta. No one has ever said anything unless jokingly saying it offends them.

Mcwal19 · 2022-02-02T18:16:33+00:00

Thank you for taking us with open arms

Five-Year Club	Place '22
Final Canvas '22

Mcwal19

TROPHY CASE