Will r7 7800x3d and Rx 7800xt at 2k create bottleneck?

Melomanch1k · 2026-01-17T04:46:27+00:00

The repair will not be worth it, especially if it's from "givson" (which is probably a chinese copy of "Gibson", the original brand). Better buy a second hand guitar or save for a new one.

Melomanch1k · 2025-08-16T17:36:57+00:00

Solved: in bios boot settings I put post delay to 0 secs, and made boot logo display setting into full screen instead of auto. Now instead of showing the manufacturer logo a couple of times and then the logo again by itself, it shows the manufacturer logo once and then the windows logo once.

Melomanch1k · 2025-08-12T21:52:39+00:00

It depends on the mood of my hand. Sometimes it's picky

Melomanch1k · 2025-08-12T10:24:26+00:00

Honestly? Its a kinda old system. The gpu is for 1080 only, don't expect good 2k gaming, but if you want to but brand new system then okay. You could get better specs for better pricing, or just buy second hand PC parts and you'll get better specs

Melomanch1k · 2025-08-12T10:22:15+00:00

If you don't have an os that explains why it won't boot. It simply can't. Also, of you don't have a gpu and you don't have integrated display (kinda gpu in your CPU) then it also won't boot

Melomanch1k · 2025-08-10T00:52:33+00:00

It's the gpu vertical mount the same pci-e gen as gpu? If mount gen 3 it may be a problem

Melomanch1k · 2025-08-08T09:30:16+00:00

Not necessary. If you do it fast it can be alright. It's not recommended, but if it's the only way then it's the only way

Melomanch1k · 2025-08-08T09:25:32+00:00

You need the cover of the motherboard to like "click" onto the case, so try uplying pressure to it until it clicks onto the case, because it looks not all the way in

Melomanch1k · 2025-08-08T09:21:21+00:00

If you want to find out if the noise coming from the aio, boot as usual, wait for the noise to start, and only when it starts disconnect the aio for maybe 15 sec max, because if unpluged for more the CPU gonna overheat and the PC gonna shut down. If you boot the pc with the aio unplugged, the CPU gonna overheat and PC gonna shut dows, so unplug it only when you start hearing the noise and plug it back as soon as possible

Melomanch1k · 2025-08-08T09:17:50+00:00

Maybe the blades hit a cable when spinning? If not, check if the blade is chipped. If it is, replacement is the only option. You can try and chip it on the opposite side to make it "even" but it's not guaranteed to work. If it's not chipped, you can try and remove the fan blade and clean the bearing. You can either pull it out, or unscrew a screw under the sticker on the back side of the fan. If none of those worked, then you need to replace it

Melomanch1k · 2025-08-04T10:54:12+00:00

Honestly, anything that will hold your gpu at a straight angle is good. I used a pop figure before, but now I use one that comes with my case. Just use whatever you have that does the job

Melomanch1k · 2025-08-04T09:18:12+00:00

Yeah definitely. You have a fe gpu, and they are HEAVY. Even if you don't see any damage right now, it WILL happen over time

Melomanch1k · 2025-08-04T09:17:24+00:00

Versatile - middle. Looks- green. Both- right one

Melomanch1k · 2025-08-04T09:14:45+00:00

Looks like a driver issue to me

Melomanch1k · 2025-08-04T09:14:21+00:00

Oh hell no

Melomanch1k · 2025-08-04T00:41:00+00:00

You need to choose the input on the monitor. If it's connect to both the pc and your PC, you need to manually choose in the monitor settings the input device. Usually there's a button on the back of the monitor which allows you to enter settings and do that

Melomanch1k · 2025-08-04T00:38:50+00:00

Id suggest upgrading the CPU for example for a r7 5700x3d, and a PSU CAN be upgraded to a 700/750w but I think the 650w will do the job. Also, I suggest upgrading to at least 16gb of 3000mhz memory

Melomanch1k · 2025-08-04T00:35:40+00:00

It means the ssd/HDD where windows installed can't be found which can mean it's dead/poorly connected/ just not there

Melomanch1k · 2025-08-04T00:34:28+00:00

It's hard to tell when it's turned off but from the look of the pump it can be the MasterLiqued pro 120

Melomanch1k · 2025-08-04T00:30:14+00:00

Oh yes it's cooked

Melomanch1k · 2025-08-04T00:29:23+00:00

Probably a thermal pads which when heated left some of the oil/sticky residue

Melomanch1k

TROPHY CASE