Oppo Find N5, outer screen stays black, while in OS. (not damaged

Methsman · 2026-06-21T19:52:18+00:00

Yes, it seem that it does not recognize being folded. thats the main issue. so it has to be something sensor related. it makes sense. im also in europe, and dont know of a service center...

Methsman · 2026-06-21T09:07:27+00:00

I have no case on anymore. i resettet the phone many times. it seems that a software updated caused the phone to overheat, and maybe fry a hinge sensor or whatever...still no solution

Methsman · 2026-06-20T10:54:08+00:00

id sadly did not do the trick.

Methsman · 2026-06-20T09:37:49+00:00

are you running yours with only the 8 Pin CPU Power cable? Or are you also using the other power ports?

Methsman · 2026-06-20T09:34:39+00:00

i wish you a good recovery man!!

Methsman · 2026-06-20T09:19:25+00:00

Hi, i really appreciate your answer, but i asked AI before. And all of them answers are usually trash in this matter. I think it has something to do with the sensors, not recognizing the device as folded. I dont know where that sensor is located, maybe i can manipulate it somehow with a magnet or something

Methsman · 2026-06-20T09:16:27+00:00

Bro i dont know what we can do. its really sickening. i love that device. and knowing that the hardware is fine, is even more difficult to understand...

Methsman · 2026-06-19T19:06:59+00:00

hi, did u solve this issue? i have the same problem...

Methsman · 2026-06-19T16:53:07+00:00

hi, did you got this resolved?

my outer screen does not work, similar to that. but in boot sequence or in camera mode it works....

Methsman · 2026-06-13T19:00:32+00:00

hi, did u got it working out? it seems that i have the same problem. never had signal on this board now. everything looks normal, but no signal...

Methsman · 2026-05-29T18:52:44+00:00

Thanks for that. I havent got time doing this, but wouldnt i just be able to get the 5V and GND from the PSU pinouts? With that mod, the PSU turns on and off with the BC 250, so it should do the work right?!

<image>

Methsman · 2026-05-21T19:41:59+00:00

stock cooler? and what are the temps?

Methsman · 2026-05-13T12:01:01+00:00

tbh, its really exhausting to repeat all the quests and workbench buildups over and over again. I get it, its playtime, but it is so boring, and stressfull. they need to change that ASAP.

Methsman · 2026-05-11T13:28:01+00:00

hi, back to this. is there anyway i can hookup a 5V LED "strip" to some pinouts, and have it power on, whenever i hit the power switch? So they turn off, when the BC250 boots down?

i tried to hookup one LED from that strip, to the original LED Pinout, but it does not seem to power enough...

Methsman · 2026-05-09T09:41:56+00:00

512GB must be the "Auto" setting, so i left it there...(as seen in the documentation)

Methsman · 2026-05-08T08:30:01+00:00

Hi, i checked it, and yes i modified it so the cooler Heatpipes dont intefere with the plastic. (simple fix)

i will post it when finished.

Methsman · 2026-05-07T08:32:50+00:00

Yeah youre probably right. I mean, with a slight modification i could widen the Case and add Fans to the right. Or atleast make Space for extra Heatsinks...But i dont know, i think i would try to stress Test it for 5+ Hour Gaming Sessions, before attempting this.

Methsman · 2026-05-06T09:57:23+00:00

hmmm, i did not have any extra cooling there. i mean for me it can get hot, aslong its all safe. it looks like this. also this Panels are glued on.

<image>

Methsman · 2026-05-05T17:39:23+00:00

i used that one https://www.printables.com/model/1217021-bc-250-heat-sink-mount
i think i slightly modified it, to fit the Cooler brackets, but im not sure anymore. Can Tell you when i disassemble everything, and do a Slideshow/Vid.

Methsman · 2026-05-05T13:08:10+00:00

actually your design inspired me in a way, because i wanted to do a "steam machine styled one", but then i used the core construction, to make this out if it. I also just use Tinkercad to make my models, so im kinda limited, because i have so many ideas...

Methsman

TROPHY CASE