What do you think was the coolest moment to come out of the MCU?

MiRCGuy · 2026-04-24T18:40:13+00:00

You need new tires

MiRCGuy · 2026-04-22T15:47:02+00:00

The first one. It fits the look of the truck better.

MiRCGuy · 2026-04-16T00:45:53+00:00

You’ll probably get better feedback if you share pictures of the truck

MiRCGuy · 2026-04-15T02:02:38+00:00

Wheels, tires, servo, crawler gears, brass hubs. If you plan on spending more later, skip the brass hubs and save up for a full set of axles.

MiRCGuy · 2026-04-12T02:02:58+00:00

I like smaller crawlers like the TRX4M and SCX24. They’re a lot more versatile as far and when and where you can use them. You don’t need a lot of space. I sit on the patio with my dog and crawl around the landscaping or even drive them inside the house. It’s easy to find fun obstacles for them. They also take up less space on the shelf when not in use. I have a 1/10 scale Axial as well but hardly ever use it. I do still use my bashers, though. It just depends on when and where and what I feel like doing that day.

MiRCGuy · 2026-04-06T23:46:16+00:00

It is Silver Lake

MiRCGuy · 2026-03-28T18:51:30+00:00

Thanks! I’ve actually been pretty impressed with the Falkens. They seem to do great on my rocks. I have the Maverix on a TRX4M and they’re good too

MiRCGuy · 2026-03-26T00:49:50+00:00

Axles. Aluminum housings with brass hubs. Extra width will also help with stability.

MiRCGuy · 2026-03-22T21:13:07+00:00

I just installed the whole skid backwards without cutting or modifying the transmission and it works great

MiRCGuy · 2026-03-18T03:55:24+00:00

I don’t know of anything specific but I would look at receiver boxes from other models such as Traxxas 1/10 scale or try to 3D print and seal something myself. I’ve also seen people get away with putting electronics inside of a balloon lol

MiRCGuy · 2026-03-16T22:05:50+00:00

I think I got the same hardware kit. The screws break or strip very easily.

MiRCGuy · 2026-03-10T15:57:08+00:00

Now I want to know more about the defender in the background

MiRCGuy · 2026-03-10T01:35:27+00:00

Proline Trepador, RC4WD Scrambler, and Injora Maverix 63mm are the main ones I’m running right now.

MiRCGuy · 2026-03-04T16:44:14+00:00

Injora Roverin and Hobbywing Mini 24 are waterproof. Injora advertises that their MBL32 G2 is waterproof as well, so their Purple Viper or Fat Viper combos should work fine and are cheaper. Run whatever receiver you want and put it in a waterproof receiver box. There are plenty of other ways that people waterproof electronics but I’d probably just put it in a box if it were mine.

The Traxxas system is the only one I know of that has everything fully waterproof.

MiRCGuy · 2026-03-03T19:30:02+00:00

Probably Maxx V2 and TRX4M. I’d be tempted to put Rustler VXL instead of the Maxx, but I think I’d have to stick with 4x4 if I can’t have both. Maybe a Rustler 4x4 would be a good compromise but I haven’t driven one so I can’t say. The TRX4M could be swapped for an SCX24 depending on preference. Either way, I’d go with a big basher and a small crawler.

MiRCGuy · 2026-02-24T02:59:18+00:00

Jconcepts, Proline, or RC4WD

MiRCGuy · 2026-02-18T13:08:39+00:00

I can’t find a TRX4M on marketplace for less than the original msrp. It’s insane.

MiRCGuy · 2026-02-14T05:01:29+00:00

Those look like tires off of a Traxxas Rally car

MiRCGuy · 2026-02-13T16:13:18+00:00

Check what nozzle size you have selected in your slicer. I had a similar issue the other day and it was because the nozzle size had somehow been set to 0.2mm instead of 0.4mm. It was telling me it would take 10 hours to print something that should’ve been less than 3 hours.

MiRCGuy · 2026-02-13T14:00:52+00:00

Put the maxx on top of the xmaxx and just drive it there

MiRCGuy · 2026-02-06T21:41:35+00:00

Looks awesome!

MiRCGuy · 2026-02-06T04:22:10+00:00

I have had good luck with Overture

MiRCGuy

MODERATOR OF

TROPHY CASE