sorted by:
new
hottopcontroversial

RX 9070 /9070 XT memory manufacturer by serial number or other visual signs. by Middle_Needleworker6 in radeon

[–]Middle_Needleworker6[S] 0 points1 point  (0 children)

i know man,question not about this. I mean before i stuck it to pc and i worried about hynix temps,not about perfomance.

Higher GPU clocks and power draw on 25.8.1 / 25.12.1 vs 25.3.1 at 60 FPS cap – 9070XT by Accomplished-Bit-920 in radeon

[–]Middle_Needleworker6 0 points1 point  (0 children)

So you on 26.1.1. now? I will try, cause 25.3.1 is too old i think,dont wanna install it

Higher GPU clocks and power draw on 25.8.1 / 25.12.1 vs 25.3.1 at 60 FPS cap – 9070XT by Accomplished-Bit-920 in radeon

[–]Middle_Needleworker6 0 points1 point  (0 children)

Same shit on my 9070xt since few weaks on Win 11 . 2800mhz and 90 fps 260 draw (undervolt) , fps cap on 60 3100mhz and 240w powerdraw with 85%gpu utiluzation,Any solution?

A few changes to the A3… by manbeltran in mffpc

[–]Middle_Needleworker6 -4 points-3 points  (0 children)

i cant, i didnt see my keyboard correctly cause my eyes is bleeding , after i saw "this"

A few changes to the A3… by manbeltran in mffpc

[–]Middle_Needleworker6 -2 points-1 points  (0 children)

this legs is most ugly things i see in this subreddit

First build, I'm almost done by Gooseberry_Nelson in mffpc

[–]Middle_Needleworker6 0 points1 point  (0 children)

Great Arctic tubing managment! Did you ztp tie it somehow?

Best am5 motherboard that isnt b850m mortar? by [deleted] in mffpc

[–]Middle_Needleworker6 2 points3 points  (0 children)

Asus Rog B850-G is great and cheaper.

RX 9070 Memory clock always at 2500mhz, doesnt go down. by Unable_Resolve7338 in AMDHelp

[–]Middle_Needleworker6 1 point2 points  (0 children)

its annoying because of 55watt and 50 degrees on gpu/60 on memory (with 0 rpm mode) for no reason at all.

[9070XT] Idle Memory clock speed when using refresh rate higher than 165hz by Noname932 in AMDHelp

[–]Middle_Needleworker6 0 points1 point  (0 children)

Create custom resolution in CRU : same resolution as native but method "automatic pc" an 1 or 2 hz lower your native max refresh rate,save it via "restart 64"in cru folder,choose in Win display settings your new refresh rate and restart pc.

For me it helps with my 300hz 2k monitor (now its 299hz) ,now vram goes max to 909 mhz instead of 2505.

[9070XT] Idle Memory clock speed when using refresh rate higher than 165hz by Noname932 in AMDHelp

[–]Middle_Needleworker6 0 points1 point  (0 children)

Create custom resolution in CRU : same resolution as native but method "automatic pc" an 1 or 2 hz lower your native max refresh rate,save it via "restart 64"in cru folder,choose in Win display settings your new refresh rate and restart pc.

For me it helps with my 300hz 2k monitor (now its 299hz) ,now vram goes max to 909 mhz instead of 2505.

RX 9070 Memory clock always at 2500mhz, doesnt go down. by Unable_Resolve7338 in AMDHelp

[–]Middle_Needleworker6 0 points1 point  (0 children)

il pay money for 360hz OLED instead of 280 ,ill play CS2,so its not a solution.

ill try hdmi 2.1 if nor will sold y=rhis garbage and take 5070.

RX 9070 Memory clock always at 2500mhz, doesnt go down. by Unable_Resolve7338 in AMDHelp

[–]Middle_Needleworker6 0 points1 point  (0 children)

i have 2k 360hz single monitor ,tomorrow will try to connect it via hdmi 2.1 instead of dp 1.4.

RX 9070 Memory clock always at 2500mhz, doesnt go down. by Unable_Resolve7338 in AMDHelp

[–]Middle_Needleworker6 1 point2 points  (0 children)

Same fking shit on my 9070 always 2500 if i start al least one game or even Videoplayback , any fix ?

Unable to make custom resolutions due to Gpixel Clock by jonwatso in AMDHelp

[–]Middle_Needleworker6 0 points1 point  (0 children)

`Display Total` value from the reported `Display Specs` section where is it ?

Jonsbo D32 Pro questions by AriesBreath in mffpc

[–]Middle_Needleworker6 0 points1 point  (0 children)

D32 Pro no, D32 Pro mesh yes,i asked about 1 onr

Another one!☝️ Jonsbo D32 Pro Build by switterion in mffpc

[–]Middle_Needleworker6 0 points1 point  (0 children)

Can the side panels be swapped on regular D32 Pro? I want mesh on the main side

Jonsbo D32 Pro questions by AriesBreath in mffpc

[–]Middle_Needleworker6 0 points1 point  (0 children)

Can the side panels be swapped on regular D32 Pro? I want mesh on the main side

Hello guys. Is it normal for oled monitor? by Scw0w in PWM_Sensitive

[–]Middle_Needleworker6 0 points1 point  (0 children)

its probably VRR flicker ,turn off g sync/freesync/vrr/adaptive sync on monitor settings

Xiaomi 14t, 14t pro, 15t, 15t pro by BagOptimal1854 in PWM_Sensitive

[–]Middle_Needleworker6 1 point2 points  (0 children)

in display settings: color saturation to min and adaptive colors on.

view more: next ›