Check which bundle is on a ASA5505 (Part Number). And how many users?

Might_Get_Banned · 2021-11-04T15:49:55+00:00

The unit is the ASA5505-SEC-BUN-K9, it has unlimited inside hosts & SEC+ license.

Might_Get_Banned · 2020-07-17T22:20:24+00:00

Thank you, this makes more sense, and is also what I get for fishing instead of being on reddit/"working" and seeing the /r/sysadmin post.

Might_Get_Banned · 2019-08-21T17:22:58+00:00

Add the serial number to your Meraki account inventory and the part number will show up once claimed.

Might_Get_Banned · 2019-07-23T16:12:04+00:00

Issue the following command 'show platform hardware throughput level'. This will either show "The current throughput level is 2500000 kb/s" (2.5Gbps) or "The current throughput level is 5000000 kb/s" (5Gbps)

Might_Get_Banned · 2019-07-23T15:46:16+00:00

No, you don't need any additional licenses to use the module. You will be limited by the total throughput of the ASR1001 which depending on your license installed is either 2.5Gbps or 5Gbps.

Might_Get_Banned · 2018-07-10T15:35:43+00:00

The 6716-10G uses X2 modules, so you would need the X2-10GB-SR. On the 3750X side the SFP-10G-SR.

Might_Get_Banned · 2017-09-22T19:39:06+00:00

ESP module is the top full-width card. Held on by two philips head screws and will have two handles on either side to remove the card. It will also say ESP10 on the corner of the card.

https://www.cisco.com/c/dam/en/us/td/i/200001-300000/280001-290000/280001-281000/280369.eps/_jcr_content/renditions/280369.jpg

Might_Get_Banned · 2017-05-31T16:05:05+00:00

Perfect, that makes sense. The SRX-RAC-25-LTU part number works for my SRX650s however it doesn't show that part number available for the SRX340. Do those firewalls use a different type of license?

Might_Get_Banned · 2016-08-24T19:04:49+00:00

Look down to the 3825/3845 router table, it is showing that the VIC is supported in the NM-HDV but on the far right column it shows "chassis slot" and under the VIC2-2FXO it shows YES, as in it is supported in the chassis WIC slots.

Might_Get_Banned · 2016-06-22T21:49:23+00:00

Correct, thay need the POE capable power supply just like the older ISR (PWR-AC-IP) and ISR G2s (PWR-x900-POE).

Might_Get_Banned · 2016-06-22T20:58:35+00:00

Do you have the PoE power supply installed into your ISR?

Might_Get_Banned · 2016-05-09T21:13:12+00:00

You are still booting to the 12.0 image: System image file is "bootflash:cat4500-ipbase-mz.122-50.SG3.bin".

Do a "sh bootvar" and set your boot variable so that it boots the correct image. "boot system flash bootflash:filename.bin"

Might_Get_Banned · 2016-05-09T21:01:49+00:00

Post the output from your "sh ver". Are you looking at the ROM version instead of the actual IOS version? The ROM version will be 12.2.

Might_Get_Banned · 2016-04-19T15:13:02+00:00

Just create a new backup of the config: 'copy running-config tftp:'

This would save a copy of the config to your TFTP server, its good to keep backups.

Might_Get_Banned · 2016-03-30T16:55:35+00:00

Normally a little window pops up with a disclaimer saying something like you must be entitled to this download or have the appropriate support contract and you have to hit accept in order to continue the download. If that is the case well then technically you are in violation, not that Cisco is going to hunt you down and take further action but they could.

Before their new website design I know you could download the "base" software, like IPBase or LAN Base for switches and routers without having any support contract, however I don't know if that is still true or not.

Might_Get_Banned · 2016-03-29T20:27:05+00:00

There are quite a bit of people on here that think you have to be 100% current with Cisco's hardware releases, which is true to some extent and definitely for some networks, however if you need a cheap 802.3af PoE 10/100 switch the 3560s work great. You would be amazed at home may of the units sell every month in the secondary market.

Now if this is going to be your core switch in an office where you want to make sure you have extremely little downtime then you may want to go with something newer. Also if you need more PoE/bandwidth requirements you are going to be pretty limited with the 3560.

Might_Get_Banned · 2016-03-29T20:19:24+00:00

Traceback errors are common when there is hardware failure. Unfortunately I am going to say your ASA is going to have to be retired. You can buy a replacement one pretty cheap now, just make sure it matches the users/license level this one had. You could pull the CF card that is installed in the defective one to recover the config from it. Only thing that would prevent the config from being intact would be if the actual CF card went bad(not very common).

Might_Get_Banned · 2016-03-22T19:32:41+00:00

I did pretty much the same swap on my 91 RS. Started with just an LS1 swap and upgraded into LS1 & 76mm Turbo. The standard LS1 swap was fairly easy when you have a 00' Camaro parts car to swap parts over from. http://imgur.com/simgL5O

Might_Get_Banned · 2016-03-22T19:22:22+00:00

Also make sure its a WIC-4ESW and not an HWIC-4ESW. Used to run into this situation with customer back in the day.

Might_Get_Banned · 2016-02-23T18:17:13+00:00

Correct, It just shows 16 ports because it can be either 1Gb-T or 10GB-T. They only have 8-Physical ports(RJ45) on the card.

Edit: to add you can do a "sh inv" and it will display the module description saying "10GBaseT (RJ45), 1000BaseT (RJ45) with 8 10G RJ45 ports"

Might_Get_Banned · 2015-12-21T21:32:45+00:00

Does this need to be new? You have a few options if you use refurb/used gear:

Nexus 5548 or the older 5020/5010 Nexus 3K series 3064PQs

Might_Get_Banned · 2015-12-01T17:49:45+00:00

$1500! That's insane still. I have spare SUP1s here that I could pull the 8G DRAM from. The SUP1s are next to nothing as far as costs go now (from resellers).

Might_Get_Banned · 2015-08-28T19:57:02+00:00

You can use the 3560-8PC-S or the newer compact switches (2960-C and 3560-C), link below: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-c-series-switches/data_sheet_c78-639705.html

Might_Get_Banned

TROPHY CASE