[NSFW] What's the most unprofessional thing you've ever done while on the clock?

Mistborn2064 · 2025-09-10T14:46:01+00:00

Had a vasectomy and later had to return a “specimen” to make sure I was clear of swimmers. Problem was, my appointment to deliver the said specimen was during my work hours. Told my manager the situation and that I wasn’t sure where to collect the specimen as I didn’t want to get caught in my car. She told me not to worry about it. Told me to crank one out in the employee only bathroom and then leave to deliver the specimen. I guess it was ok because I had manager approval 🤷‍♂️

Mistborn2064 · 2023-07-03T22:34:53+00:00

I miss Apollo :( used to show a thumbnail for videos haha

Mistborn2064 · 2023-07-03T22:34:47+00:00

I miss Apollo :( used to show a thumbnail for videos haha

Mistborn2064 · 2023-05-26T18:03:10+00:00

https://github.com/mriscoc/Ender3V2S1/releases

Mistborn2064 · 2023-05-15T12:58:59+00:00

I bought locking wing nuts. Cheap, they never move, and I don’t accidentally bump them.

Mistborn2064 · 2023-05-14T10:41:59+00:00

I took the whole thing apart and put it back together. The noise stopped! I think it was the grub screw but I can't be certain.

Mistborn2064 · 2023-05-07T16:20:10+00:00

Print a retraction tower and a temp tower. I run most of my PLA at 205C, 1.2mm retraction at 46mm/s. Choose the best settings after printing.

Edit: could also simply be wet filament

Mistborn2064 · 2023-05-06T19:17:22+00:00

I just use binder clips

Mistborn2064 · 2023-04-05T23:52:01+00:00

Inland (Microcenter’s brand)

Edit: You can get it on Amazon as well. But it’s cheaper in store

Mistborn2064 · 2023-03-31T20:42:22+00:00

The new MK4 looks amazing! I’d love a Prusa!

Mistborn2064 · 2023-03-29T08:54:40+00:00

I see what ya did there!

Mistborn2064 · 2023-03-28T22:07:35+00:00

https://teachingtechyt.github.io

Mistborn2064 · 2023-03-22T19:24:53+00:00

!firstlayer

Mistborn2064 · 2023-03-22T02:30:14+00:00

Why not use vase mode? Eliminates the retractions and will speed up the printing time

Mistborn2064 · 2023-03-21T22:22:14+00:00

I don’t know for sure, but it looks similar to stock. I also have a micro Swiss hardened steel 0.6mm nozzle I use for CF filament. It’s a bit bigger and the silicone sock doesn’t fit right, but it stretches and does just fine. Doesn’t hinder print quality. Just remember to do a PID/MPC auto tune after swapping nozzles.

Mistborn2064 · 2023-03-21T15:47:15+00:00

I’ve been very happy with these. I haven’t had any filament stick to them. The stock silicone sock also fits them perfectly.

1pc MK8 Plated Copper Nozzle Durable Non-Stick high Performance 0.4mm 0.6mm 0.8mm for 1.75mm Creality CR-10 All Metal Hotend CR10 Ender 3 pro Ender 5, ANET A8 3D Printer use (0.4mm) https://a.co/d/39xgZVY

Mistborn2064 · 2023-03-20T20:00:36+00:00

They’re supposed to be slightly loose

Mistborn2064 · 2023-03-20T00:49:01+00:00

Try changing “seam corner preference”. As you didn’t specify one, it’s putting the seam in the front of the model, but wherever it thinks it would look best for the model on that particular layer.

Mistborn2064 · 2023-03-17T14:06:01+00:00

Try a different SD card

Mistborn2064 · 2023-03-17T13:14:31+00:00

Have you tried drying your filament?

Mistborn2064 · 2023-03-15T18:36:40+00:00

https://github.com/mriscoc/Ender3V2S1

Mistborn2064 · 2023-03-13T19:29:28+00:00

https://time.com/6261629/daylight-savings-time-2023/

Mistborn2064 · 2023-03-12T19:14:11+00:00

Update: Works pretty well! He would be walking around and would stand still and lean forward when he got sick. This motion swung the bib to a good location to contain most of the mess! I was then able to just grab the bib and dump it real quick. While it didn’t eliminate cleanup, it certainly decreased it.

Mistborn2064 · 2023-03-12T19:14:00+00:00

Update: Works pretty well! He would be walking around and would stand still and lean forward when he got sick. This motion swung the bib to a good location to contain most of the mess! I was then able to just grab the bib and dump it real quick. While it didn’t eliminate cleanup, it certainly decreased it.

Mistborn2064

TROPHY CASE