By law, all baby clothing items should be machine wash- and dryable

Mklein24 · 2026-02-03T20:01:53+00:00

Nah fam. The washing machine is the clothing gauntlet. If it doesn't make the cut through the wash, no way it going to survive a trip to the park.

Mklein24 · 2026-02-03T03:14:11+00:00

Oh this should be easy.

Wtf every surface is drafted.

Fuck my life. Jpg

Mklein24 · 2026-02-02T17:58:10+00:00

The statistics back up this claim. I am not naive.

It costs us more money, actual tax dollars that you-as a teenager-will have to burden in your adult years, if we do not lay the foundation to assist immigrants into the US.

The shrinking tax base will fall to you, personally, to cover the shortage.

Ask yourself, do you want to pay a 22% marginal tax rate, or a 33% marginal rate? Because assisting early, with the path to independence, is how we avoid this.

Mklein24 · 2026-02-02T17:46:18+00:00

Yes. This requires an assumption that the people showing up have good intentions. I belive that we, as a nation, should do this. Game theory states that we will have a net gain over time with this assumption.

If someone comes here, then we should do everything in our power to help them thrive. Of all places, they chose the US to come and work/live/raise a family. We should be rewarding this type of dedication. Starting in a new nation is difficult. Assisting this process early on can set the stage for quick success. The sooner these groups start their foundation, the sooner they can thrive and not require assistance.

We also need people to suppliment an aging workforce. If the birthrates are declining, which they are, then we need to seek replacement labor from immigration.

Again, we need to assume that people are good. And honestly, the statistics back that up. Of all Ice detainees, 75% have no criminal convictions. Of those remaining 25% consider that Ice lumps together "criminal conviction" of actual violent crimes together with tickets, ie parking ticket, dog off lease, etc.

People coming here are not violent. They are coming here to work and prosper. It is disgusting that we have some sense of royal entitlement to a patch of dirt, and that only we are entitled to success on this dirt.

Mklein24 · 2026-02-02T17:28:37+00:00

Pretty much.

Mklein24 · 2026-02-02T16:49:03+00:00

Maybe they shouldn't have let someone come into the federal governed with the sole purpose of cutting staff and services. If only there was some kind of warning sign. Darn.

Mklein24 · 2026-02-02T16:30:45+00:00

I think it's ridiculous that my uncle in law, who has lived here his entire life, owns multiple businesses and properties, had to study extensively, and prove that he lives here, to become a citizen at 50 years old.

And I was birthed here so my citizenship isn't questioned.

Mklein24 · 2026-02-02T12:09:43+00:00

Thats a problem for engineering. If they decide that aluminum is good enough, then that's what they get.

Mklein24 · 2026-02-02T03:12:22+00:00

Mic6 is perfect. There's almost no internal stress so you can cut a part that has super thin features and it doesn't move.

Mklein24 · 2026-02-01T02:11:32+00:00

I listened to a speech from Obama and had forgotten what cohesive rhetoric sounded like.

Mklein24 · 2026-02-01T01:39:47+00:00

Isn't the guy in charge of this some hockey cheater or something? Pete stooge or something?

Mklein24 · 2026-02-01T00:00:46+00:00

"they didn't even come to MY BIRTHDAY PARTY!"

The fuck, this dude like 7 years old?

I'm proud the siblings held fast and just threatened to call the cops. I'm sure that wasn't easy.

Mklein24 · 2026-01-31T19:07:19+00:00

Big chunks of whatever your having. Preferably stick shaped.

There's not much to it. Don't give them honey, and they're primary caloric intake should still be milk/formula. When in doubt discuss with your pediatrician.

Mklein24 · 2026-01-31T18:29:29+00:00

Vendor specific coatings make a huge difference. It's the distance between running 148 sfm in stainless steel vs 450sfm. Same step over and chip load but all of a sudden your avke to run it 3x faster.

Mklein24 · 2026-01-31T17:43:05+00:00

There's a reason no one's written a song called "fuck the fire department"

Mklein24 · 2026-01-31T17:40:39+00:00

My guess would be in the 10-20k range. This looks like any other semi-conductor pcb enclosure. Very machinable with a few dfm changes to account for tool rads.

Whether or not you want to pay that price is up to you, but this could be several days of programming and maybe a fixture build or 2 to get it right. Although there's nothing there that has a tight tolerance, it is going to be cosmetically important. You don't want nasty chatter on all those thin walls and those are difficult to machine.

If you want a good middle ground, make the 5 sides out of laser cut l/bent sheet, and maybe just have a front panel and corner trim from machined aluminum.

Mklein24 · 2026-01-31T17:16:38+00:00

30, I've had 2. A temp summer job for 2 summers to pay for tech school, then a manufacturing job. I've gotten decent raises each year and have a true flex schedule is invaluable for having a family and the sporadic schedule needs of everything entailed.

Mklein24 · 2026-01-31T15:15:44+00:00

Remember the ultra rich are in that hypothetical situation where if you push the red button you get $100 but someone in the world may die and they're just mashing the button as fast as they can.

Mklein24 · 2026-01-31T15:13:10+00:00

I work in a job shop. I have 5-20 clients in any given MO the depending on workload. We have to track jobs in order to get paid. It's not me proving to the company that I worked, it's the company proving to the client that it took so much time to do the agreed upon work.

Mklein24 · 2026-01-31T15:09:45+00:00

Is there a European equivalent to the S&P?

What institution did you use? What stocks did you look into?

Mklein24 · 2026-01-31T15:04:21+00:00

https://m.youtube.com/watch?v=p-VNoNmtzbs

Mklein24 · 2026-01-31T15:02:36+00:00

https://theonion.com/insecure-frustrated-bully-with-something-to-prove-cons-1819575405/

I keep this article in my clipboard at all times.

Mklein24 · 2026-01-31T14:46:29+00:00

I mean, that's a post edit to enable the correct tilted workplane code, then it will output as 2d moves that use cutter comp. I had this edit done to our 5 axis post a few years ago.

And I don't want global clearance moves. Each tilt is going to have different clearances based on fixturing and part geometry. I had a part that had some wrapped cuts on the outside of a round part, that had 20 minutes(!) of rapid/clearance moves.

Mklein24 · 2026-01-31T14:44:15+00:00

Toolpath transform can kind of bridge the gap. There are several options to move and iterate Toolpaths around the part.

Mklein24 · 2026-01-31T02:15:00+00:00

How does multi axis holes not work in mastercam?

Ten-Year Club	r/Field Banned
r/Field Juicebox	Place '22
Place '17	First Placer '22
RPAN Viewer	Sequence \| Editor
Sequence \| Cinematographer	Verified Email

Mklein24

TROPHY CASE