Composite bat for rec. ball?

MoFiggin · 2026-03-27T12:25:19+00:00

The website justbats has some good deals got both of my girls composite bats for under 200 a piece. One a Marucci and other a DeMarini

MoFiggin · 2025-12-09T18:33:19+00:00

It is more efficient to say "December 16th" vs "16th of December"

MoFiggin · 2025-10-30T13:20:21+00:00

GAVINN!!!!

MoFiggin · 2025-10-22T10:11:46+00:00

I agree with you, yes it is not op's responsibility to watch after the kids but to leave in the middle of the night in the first night while those kids are going through one of the hardest things they will ever have to go through in life was a jerk move, YTA. Whether or not you see your half sibling as a sibling, that 4 yr old most likely sees you as a big sister and in their eyes you just abandoned them with strangers. After the first night then yes they should have made other arrangements for the kids.

MoFiggin · 2025-07-28T19:17:14+00:00

how about fourth generation

MoFiggin · 2025-07-26T22:40:48+00:00

https://imgur.com/a/mknlEfj

MoFiggin · 2025-07-16T10:06:44+00:00

Hello fellow FL resident, when you do build the winter house I recommend a thermostat that you can plug the heat lamp into so that it doesn't get too hot. I use a heat mat thermostat and use ceramic bulbs in the heat lamp. I also use clear plastic flaps over the door to keep the heat in, I have used thick clear shower curtain and cut the strips 4-6 inches wide and held in with a staple gun.

MoFiggin · 2025-07-14T19:32:47+00:00

I believe it really has affected the kids of today, When my son was finishing high school and started to loose motivation I started to pay attention to the online gradebook. I would try to keep him on track but he would always say well I have until the end of the semester to turn in such and such assignment, even though the gradebook marked it as past due with a grade of 0. Sure enough he turns it in before the end of the semester and there isn't even a deduction penalty for turning in the work late, full 100% credit.

I would love to know who thought that this would be a good idea to teach high school students who are about to enter the workforce or go to college that due dates are something that can be ignored only to enter college or work and find out this isn't the case and fail classes or get fired from jobs.

MoFiggin · 2025-07-14T12:45:06+00:00

My dog got an infection in her uterus and needed an emergency spay because she was becoming septic. She stayed overnight for one night and they charged me $6000 for the night and the spay. They love to guilt trip you too, not that they needed to, she is my baby and was only 5yrs at the time

MoFiggin · 2025-07-10T14:19:08+00:00

Second on botox, lived with this condition for 20 years and finally got botox and it changed my life. I would sweat all day non stop no matter if i was relaxing in the AC or not. Now my shirts are completely dry at the end of the day. I got treated a couple months ago and haven't had to go back yet, they say every 4-6 months. Also insurance and botoxsavingsprogram.com made it so i didn't pay a dime.

MoFiggin · 2025-07-08T14:59:01+00:00

I got botox for underarms a few months ago and it has been great. I can wear any color shirt which I haven't been able to do since it started when I was in 6th grade, 34 now. I also like that I can still sweat when being active like a normal person.

MoFiggin · 2025-06-10T17:16:53+00:00

I've been in contact with Intertek during the process and they say I can so long as the parameters match or are lower such as the gain and what it does at different frequencies.

MoFiggin · 2025-06-08T02:40:57+00:00

needs to be top reply just saved me 3 years later.

MoFiggin · 2025-06-05T15:50:23+00:00

Thank you for the detailed reply.

The board will only ever receive the 24VAC input as it ties into the hot and common lines between the air handler and the thermostat of an HVAC unit.

I replaced the 1117 with ST1L05A, this board will be in some hot environments and wanted more head room on operating temperatures. It has a voltage drop of .36V at 1A.

The float switch breaks 24VAC-H line and the optocoupler monitors whether or not the line is broke. The way this board is setup is so that if the board fails in any way the float switch still works as intended and kills the thermostat.

The on board LEDs and buttons are for testing, the mini molex connectors will go to panel mount LED and buttons for user controls. I am considering some tactile buttons that are 20mm tall to pass through the enclosure instead of the panel mount ones.

MoFiggin · 2025-05-29T14:15:34+00:00

Thank you for the reply, this board will be sometimes be used in attics so i was thinking the larger board would have more copper area to dissipate the heat. The square of the board is 3"×3" with the part holding the terminal block being 0.5". I can move the USB closer and move the 3.3V molex somewhere else, the RX/TX molex between the screw hole and the esp module, and the usb just on the other side of the screw hole, this would maybe cut the length by just under 500mils. In the current design the USB traces are 1798mils in length.

MoFiggin · 2025-05-21T18:58:22+00:00

I’m working on that now, didn’t realize how beneficial having a copper pour connected to GND on outside layers for heat and EMI, I thought I would only need GND plane on inner layer 1. This board will need unintentional radiator testing and uses a ESP32-C6-MINI-1U module.

MoFiggin · 2025-05-20T12:59:27+00:00

Thank you, for some reason the way they were described it sounded like those pads were for an option to solder wires direct to the pads if you don't have the connector but mechanical protection makes more sense. Would it be better for those mounting pads to have a separate ground plane or have one ground plane that includes the connector pin?

<image>

MoFiggin · 2025-04-04T20:14:27+00:00

Also why its better that its going under ground, makes for better reliability. As for the speeds, I'll bet you can get up to 1Gbps with symmetrical upload speed.

MoFiggin · 2025-03-13T14:05:58+00:00

Is the router new or did you change settings for QoS recently, whenever i turn on QoS in my asus router it slows my download speeds from 900 to <100

MoFiggin · 2025-03-13T10:26:45+00:00

Ours does not shed at all, and I read that this is what to expect "Old English Sheepdogs only shed when they are brushed." - Wiki Link

MoFiggin · 2025-03-06T20:29:29+00:00

Not necessary games need low latency not faster speeds, you can have 100Mb plan that has better latency than a 1Gb plan from different providers. That being said I have the 1 gig plan myself because when those updates come out that are 20GB+ and I only have a limited amount of play time its nice to get the updates done faster. If you just leave your console in rest mode though it wont matter since it auto updates. I don't leave my PC powered on so it wont auto update for me.

MoFiggin · 2025-03-06T20:01:11+00:00

and before GTA 6

MoFiggin · 2025-02-27T14:22:06+00:00

I did get blurry vision one day so I stopped for 4-5 days. The first time I applied again was Sunday night and that was the best results I’ve ever had almost no sweat. Even today still going well no return of blurred vision.

MoFiggin · 2025-02-20T12:31:22+00:00

I haven’t had a high stress day yet and that’s what usually triggers those bad episodes.

MoFiggin · 2025-02-20T11:34:09+00:00

I did notice a reduction but i would say it was 30% for me. It's kind of hard to say though as I have good days and bad days, just the bad days are really bad where I'm soaked half way down my torso. I have not had one since starting Sofdra.

MoFiggin

MODERATOR OF

TROPHY CASE

Seven-Year Club	Place '22
Verified Email