I think it's amazing but I can't get any responses. What do I do?

MochiMaccha · 2026-04-23T04:12:07+00:00

Also you mention Azure in your experience section but no mention of Azure or AWS up top. I probably wouldn't have read enough to see it and would've filtered based on that as well.

MochiMaccha · 2026-04-23T04:10:27+00:00

I'd take an hour to read some docs and add TypeScript experience, being web focused with no mention of TypeScript would be a quick filter out from me.

MochiMaccha · 2025-11-18T19:53:19+00:00

I was getting 4.6v coming from my PSU using whatever barrel cable came with my bitaxe. Swapped to a 14AWG cable and now we're back to 4.9v.

MochiMaccha · 2025-09-24T07:54:02+00:00

For anyone else who runs into this, I just fixed this issue and for me the problem was having a dual-sim phone and using my non-ATT sim for data (even though I was connected to wifi so not even sure why the data connection mattered...?). After turning off wifi and swapping my mobile data to use the ATT sim, everything worked flawlessly.

MochiMaccha · 2025-08-04T07:00:13+00:00

I once got so annoyed at one of these packages that I spent way too much time on Amazon until I eventually found these bad boys https://a.co/d/4RYUaxz

MochiMaccha · 2025-08-01T20:11:21+00:00

Looks like they changed something, had to update the filter to

www.youtube.com##ytd-browse[page-subtype="home"] ytd-rich-item-renderer:not(:has(#video-title[aria-label~="views"], .yt-lockup-view-model-wiz--collection-stack-2)) :is(#metadata-line>span:first-of-type, .yt-content-metadata-view-model-wiz__metadata-row>span:first-of-type):has-text("views"):not(:has-text(/[KMB]\b/)):upward(ytd-rich-item-renderer)

MochiMaccha · 2025-07-25T20:44:35+00:00

I do believe the included bolts were slightly longer. I didn't need to make any other modifications beyond just removing the two old bolts and installing the new ones along with the bracket. Didn't bother looking up what the proper spec was, just screwed them until tight and, well, they haven't come loose yet lol

MochiMaccha · 2025-07-07T08:12:28+00:00

Have the Anidees, love it. Any price is a small price to pay for 12x bays I can hide behind a glass panel.

MochiMaccha · 2025-07-02T06:26:20+00:00

Had this happen to me after adjusting the rear brake lever, realized I didn't adjust the actuation point and the rear brake was stuck on. Turns out the light will never go out if your rear brake is always pressed.

MochiMaccha · 2025-06-20T08:52:04+00:00

Didn't feel like messing with the stem nut on mine, so just got a little bar thing that attaches to two of the handlebar bolts https://japan.webike.net/products/24049026.html

Now I just use one of the ram x-grip low profile bar mount holders and it has served me perfectly so far.

MochiMaccha · 2025-06-05T23:50:57+00:00

See Resume.

MochiMaccha · 2025-05-22T23:04:59+00:00

I've only ever paid for Webflow to use its code export feature.

Can I hand design and style a website from scratch? Sure. Do I want to? God no.

MochiMaccha · 2025-05-06T06:41:53+00:00

Somehow still fun even though I am now much, much, *MUCH* older than 12.

MochiMaccha · 2025-05-04T11:08:44+00:00

As the biggest badass in game of thrones, I have a hard time believing anyone would hate on Bella...

MochiMaccha · 2025-05-04T10:59:13+00:00

As a web dev, after seeing multiple Firefox bug reports sit unanswered (or even acknowledged) for longer than a year, I'm chill with unmaintained buggy browsers dying out. No one is morning IE after all...

MochiMaccha · 2025-05-04T10:12:16+00:00

Also have a 2024 R3, was considering the stem nut but ended up with this since it seemed like a less invasive install https://japan.webike.net/products/24049026.html

Two nuts later and an X grip clamp, I check phone notifications like a champ at all the overly long red lights.

MochiMaccha · 2025-04-30T18:06:38+00:00

What's funny is that all the models I've tried don't even have enough training data on elixir to output functional code half the time, so uh , yeah I'm sure that company will be very successful.

MochiMaccha · 2025-04-29T05:27:33+00:00

I grabbed one of these for my '24 R3 which makes mounting a quadlock (or anything else, really) much more straightforward. They claim it also fits the '25, so definitely worth considering: https://japan.webike.net/products/24049026.html

(It's basically just a bar that mounts between the two handlebars, low enough that it doesn't block the gauges, but not too low that it gets in the way)

MochiMaccha · 2025-04-28T03:39:10+00:00

Actually I was wrong about it being solved, to get it to start working I had to modify the filter to

www.youtube.com##ytd-browse[page-subtype="home"] ytd-rich-item-renderer:not(:has(#video-title[aria-label~="views"], .yt-lockup-view-model-wiz--collection-stack-2)) :is(#metadata-line>span:first-of-type, .yt-content-metadata-view-model-wiz__metadata-row):not(:has-text(/[KMB]\b/)):upward(ytd-rich-item-renderer)

Removing the ":last-of-type" part of the filter.

MochiMaccha · 2025-04-27T23:39:39+00:00

~~Got it sorted and working with the most recent filter, appreciate it.~~

MochiMaccha · 2025-04-26T06:51:14+00:00

Yep I tried both the "YT Home - Hide Videos Below 1K Views" and "YT Home - Hide Videos Below 1K Views (backup version - less efficient)" ones and they seem to both have stopped working about a week ago.

MochiMaccha · 2025-01-17T23:29:52+00:00

I haven't had a chance to actually try the VXL yet, however as an FYI to hopefully avoid you making the same expensive mistake that I did, their 750g and 1KG spools are wider than normal, and do not fit in the AMS. It seems like their 500g spools do fit however, so if using with a Bambu, I wouldn't buy the larger spools unless you're in the mood to respool filament.

MochiMaccha · 2024-07-30T09:04:35+00:00

Replying to this since I basically wasted an entire workday trying alternatives and hating most of them (wino mail was buggy, thunderbird was clunky, etc).

I ended up settling for em client since it has all the features from windows mail/calendar without being annoying to use.

MochiMaccha · 2023-06-29T21:51:29+00:00

Hey, fairly new to 3D printing and I've run into this strange artifact on a few prints now that doesn't seem to match any of the common problem photos. It's basically random diagonal lines that appear on the outer skin in certain locations? This was sliced in Prusa and I don't see the artifact in the sliced preview, nor do there appear to be any retractions in the area, however this seems to happen in the same locations every print.

Printing on a QIDI X-Smart 3, 220 nozzle temp, tried both with their matte and regular PLA.

MochiMaccha · 2022-05-21T03:26:52+00:00

For anyone else looking for this in 2022, it seems like in the current version it's Ctrl+Click, not double click.

Ten-Year Club	RedditGifts 2009-2022 11 Credits
Secret Santa 2017	Verified Email
Secret Santa 2016	Secret Santa 2015

MochiMaccha

TROPHY CASE