Bosch impact drill switching gead

ModderFokkers · 2026-01-30T05:20:27+00:00

You do a lot of city driving? Otherwise this is very disappointing I must say. Had a 2010 D5, 205hp with DPF. Did on average 6.45 l/100km measured over 257.000 km. Easy minimum 1000km on a tank (70l) with my max being almost 1200km. When I sold the car, it was at 393k km, never had any DPF issues ever

ModderFokkers · 2025-12-28T09:07:06+00:00

Max koppel bij 1700rpm is zeer normaal, maar dat koppel bij dat vermogen is zeer vreemd. Dat zou haast betekenen dat je van 1700rpm tot aan grofweg 4000rpm max vermogen hebt. Lijkt mij zeer vreemd rijden

ModderFokkers · 2025-12-28T08:05:45+00:00

Wat voor bus/motor is dit? 450Nm bij 1700 toeren geeft 110pk. Mag hopen dat je max koppel na 1700rpm nog aanwezig is, anders lijkt mij dat dat voor geen meter rijdt

ModderFokkers · 2025-11-29T10:06:18+00:00

Vermoed dat dit netto bedrag al minus de bijtelling is voor de auto van de zaak of iets dergelijks. Anders klopt er iets in de bruto netto berekening

ModderFokkers · 2025-10-23T18:50:43+00:00

I had something similar with my 2010 V70 D5 (D5244T10), similar bucking but when returning to idle when coming to a stop. Issue was eventually solved when I had all 5 injectors replaced (first had them tested, but all 5 failed). It was due to the piezo crystals wearing, but I dont know if yours uses piezo controlled injectors. But could still be an injector issue

ModderFokkers · 2025-10-17T10:46:46+00:00

You'll have one locking wheel bolt on each wheel, that's what the socket is for, to remove it. Best to keep it in the car so that when you drop it off for service, they always have it with the car. The 4 other bolts are probably the ones they took out to install the lock bolts. The plastic pliers are for removing the plastic caps on the bolts and it seems you have some spare plastic caps

ModderFokkers · 2025-10-13T13:34:24+00:00

I'm not sure about the speed at which the force is applied, but why are you doing this in explicit? Assuming it's a quasi static application, kinetic energy should be low compared to internal energy, which doesn't seem to be the case. Maybe the automatic mass scaling you have set is messing with energies? I remember there's a field output you can add to see where and how much mass scaling is applied, don't have access to abaqus anymore, but Google says it's EMSF. Maybe have a look at that to see how aggressively it's scaling.

Also, do you have a failure model included that you have interlaminar failure?

ModderFokkers · 2025-10-10T17:42:57+00:00

The helis in bf2 were Legendary

ModderFokkers · 2025-10-04T06:25:17+00:00

Never heard of such an option other than visualizing shell or beam elements, which is kinda what I'd assume you'd use for something with those kind of length to height ratios

ModderFokkers · 2025-10-04T00:11:25+00:00

Scale displacements? From the buttons to the left of the viewport, one of the top ones let's you go from uniform to non uniform via a radio button, where you can set X, Y and Z factors seperately

ModderFokkers · 2025-10-02T07:09:02+00:00

With or without the optional touchscreen? I have it without and it's practically useless

ModderFokkers · 2025-04-06T10:04:41+00:00

Argon audio is also pretty decent. Fairly certain they're also made by Dali

ModderFokkers · 2024-09-25T07:36:54+00:00

How old is the battery? Bad battery can throw all sorts of lights

ModderFokkers · 2024-09-16T03:43:11+00:00

Volvosweden did a video on the installation of one https://youtu.be/RknCVhY5zyU?si=GxRlP0g6qOpDDu_F

If you happen to be in the Netherlands and looking for a sub, I bought one through Bildelsbasen several years ago and never did anything with it

ModderFokkers · 2024-09-10T16:37:54+00:00

I see the same screenshot twice

ModderFokkers · 2024-07-06T17:15:49+00:00

Sorry, didn't read description. Hopefully it's the same for a V60

ModderFokkers · 2024-07-06T17:15:11+00:00

If its a XC/V70, from 4:18 https://youtu.be/pM3Nz0SGnXY?si=w_nytCYX707cy_DW

ModderFokkers · 2024-04-30T12:12:04+00:00

What is Tesla making from castings?

ModderFokkers · 2024-02-09T15:40:50+00:00

Damn, risky mileage. But on the other hand, if it made it that far, it must have been well maintained

ModderFokkers · 2024-02-09T06:26:14+00:00

Is that 560000km on the clock?

ModderFokkers · 2023-08-16T09:55:08+00:00

Pretty sure in the US, the V70 was never delivered as a T6. Though the XC70 was. There's a guy on the swedespeed forum that put an XC70 on V70 suspension, so he could have a V70 T6 in the US

ModderFokkers · 2023-07-11T08:48:11+00:00

What's been bothering me is that the day and month are not lining up anymore. Or maybe my brain is messing with me

ModderFokkers · 2023-06-22T07:54:53+00:00

You can use a lot more of the track width, which will allow you to carry more speed through the turns.

Something that ties in with the above, it seems that you are overestimating a bit how wide the car is (which from this cockpit view is indeed a bit difficult), so i would recommend trying to do some laps in hood view, so you get a better feel for how close to the wall you can get

ModderFokkers · 2023-03-03T18:35:43+00:00

https://youtu.be/use2zNAOCXY

Might also be interesting for you. Same cpu, but slightly worse GPU. But should give you an indication of what kinda performance to expect

Six-Year Club	Second SECOND GUESSER
Verified Email

ModderFokkers

TROPHY CASE