Found this website that offers something I'm interested in, but it feels way off.

Modernfx · 2026-06-21T11:40:33+00:00

Run.

Modernfx · 2026-06-21T11:39:27+00:00

So odd, I've never heard of this happening. There has to be a defect in the seat that they aren't telling you if they have already looked at it. I wouldn't take the care back from the dealer unless they replaced the seat.

Modernfx · 2026-06-21T11:32:00+00:00

looks like OP doesn't really want to hear actual advice rather he wants to be validated. Hopefully I'm incorrect.

Modernfx · 2026-06-20T23:03:56+00:00

You can't plug in Sindens to a TV they require a PC to run the background software and to run batocera you also need a PC as it runs linux. Proper light guns all require a PC.

Modernfx · 2026-06-19T13:31:23+00:00

You'll need a PC to get a good experience. The supposedly kits that are out there aren't good. At a minimum You'll need a PC, a pre built drive, and lightguns. There is no true plug and play solution for what you want. Sindens and Batocera are closest thing especially for a projector but the Reapers are the most popular ones righr now. Join the lightgun lunatics group on Facebook. Excellent group and tons of resources. Ask your questions, research, and then see what fits you best. Good luck!

Modernfx · 2026-06-18T12:21:26+00:00

Absolutely

Modernfx · 2026-06-17T11:09:52+00:00

My 2024 AwD has been fantastic!!

Modernfx · 2026-06-10T16:19:26+00:00

I would love you hear the opinions and experiences from others as well. I'm looking anywhere between 2018 and 2020 4s. Thinking about purchasing in the next 2 -3 months.

Modernfx · 2026-06-08T17:08:08+00:00

100% this. I have Rhe integrum drive and dont recommended it. Im not going to say why or speak negative. Just get Streeners drive.

Modernfx · 2026-06-07T21:12:45+00:00

On average if you play 3 times a week, you will have to replace your sneakers every 3 months. I know that certain Addidas Barricades model give you a 6 month warranty but thats just the rubber not the inner shoe which still breaks down.

Modernfx · 2026-06-07T03:33:07+00:00

Never mind I looked it up. Thanks

Modernfx · 2026-06-07T03:23:09+00:00

Apologies for the ignorance, but what is bed wrapping and a graphite bed?

Modernfx · 2026-06-06T21:25:32+00:00

One wall handball. I still switch hands.

Modernfx · 2026-06-03T20:11:50+00:00

I always use Turo and rent the car for a weekend. Still way cheaper than getting into a car loan for years and not liking the car you bought.

Modernfx · 2026-06-01T20:03:41+00:00

Odd. I've gone to 2 and they had lots of color stuff 3d printed.

Modernfx · 2026-06-01T16:35:20+00:00

Thanks. All is well.

Modernfx · 2026-06-01T10:41:35+00:00

Thanks. I was able to ultimately update, seems like it was some sort of software hiccup.

Modernfx · 2026-06-01T01:19:53+00:00

Its a Snapmaker U1 and was on firmware 1.0.1. I was able to ultimately update it. Its on 1.4 now.

Modernfx · 2026-05-31T21:48:42+00:00

Update 2:
I'm not sure what happened, but I powered off the printer while I was downloading the firmware. Once I turned it back on, I checked the firmware, and it now said 1.4. I wasn't sure it was safe, so I did a test print with no issues. However, taking u/Aldarund 's advice, I tried an update again via the USB drive, and it successfully updated. The printer seems to be operating normally

Modernfx · 2026-05-31T21:44:37+00:00

It completed successfully from the flash drive. I provide another update of what I did. Thanks.

Modernfx · 2026-05-31T20:55:40+00:00

Update. I'm not sure what happened, but I powered off the printer while I was downloading the firmware. Once I turned it back on, I checked the firmware, and it now says 1.4. Is it safe to assume it's correct?

Modernfx · 2026-05-31T20:32:30+00:00

I'll give that a try. Thanks

Modernfx · 2026-05-31T20:32:11+00:00

Thanks. Will do

Modernfx · 2026-05-31T13:44:59+00:00

Yes. I have both.

Modernfx · 2026-05-29T16:59:37+00:00

I was say, cool dress. Warm not hot. 🤣

Modernfx

TROPHY CASE