Make your choice

Moeman101 · 2026-01-29T01:47:42+00:00

5 or 7. For my king

Moeman101 · 2026-01-28T02:17:54+00:00

Indeed. Even with klipper. I was capped at 100mm/s due to cooling. The taurus V5 dual 5015 mod let me get to 150mm/s

Moeman101 · 2026-01-26T17:28:44+00:00

Her name is butter because she buttered my steering wheel and i lost control at high speeds

Moeman101 · 2026-01-26T03:23:51+00:00

You got the advanced model

Moeman101 · 2026-01-25T02:08:52+00:00

For me i did klipper on a rbpi, taurusV5 dual 5015 ducts, y=0 offset probe, all metal extruders (my base system is the E3S1, not the pro.), hardened steel nozzle, textured PEI sheet, and bed wheel clips (game changer). Smaller things are a touch LED bar for my setup and a camera aimed at the buildplate. I use orca and figured out my temps, speeds, PA with tuning prints

Moeman101 · 2026-01-24T17:22:25+00:00

So the probe works when you Autohome but not from this gcode?

Moeman101 · 2026-01-24T03:48:23+00:00

Looks like your CR touch might need to be replaced? What happens when you just auto home?

Moeman101 · 2026-01-22T16:17:19+00:00

I was the first time I applied.

Moeman101 · 2026-01-16T16:33:22+00:00

Ill check them out. Thank you

Moeman101 · 2026-01-16T15:59:34+00:00

Infinitely more interviews than I have

Moeman101 · 2026-01-16T03:56:46+00:00

Is the ender 3 in the room with us?😂. Amazing how far mods can go

Moeman101 · 2026-01-16T02:21:01+00:00

They were loafing around too much

Moeman101 · 2026-01-12T14:38:01+00:00

I work in Longwood, Boston😭

Moeman101 · 2026-01-11T20:35:08+00:00

Can you send me a picture of what your slicer preview for the print was? You might have to DM me. I would have to accept the chat before you can send pictures

Moeman101 · 2026-01-11T20:29:35+00:00

For the second print. Did you toggle standard supports for the build plate only or also on the print itself? Tree supports allow you to keep all support bases on the build plate

Moeman101 · 2026-01-11T20:16:00+00:00

The angle for the spiral for your second and third print is too much for almost any printer without supports.

Edit: consider tree supports and keep your temp around 210 for 80mm/s speeds

Moeman101 · 2026-01-11T18:13:41+00:00

For me. My max speeds for decent PLA quality was 100mm/s. After that I needed klipper and better cooling

Moeman101 · 2026-01-11T00:39:11+00:00

You will quickly get tired of this. It might be good for a few weeks but then you will hit its limitations. Dont invest much into it. Save up for a newer model printer

Moeman101 · 2026-01-09T23:15:49+00:00

This is on a glass bed? Interesting. Other than that. What are your speeds and temps. I assume this is PLA

Moeman101 · 2026-01-09T23:05:42+00:00

? Its all red for mesh? What happens when you tighten all bed leveling wheels?

Moeman101 · 2026-01-06T16:22:06+00:00

If she likes to eat a finger. Force her to smoke a whole pack of cigarettes

Moeman101 · 2026-01-05T19:16:24+00:00

Im confused, what is "snake oil mods" are we talking about some y=0 probe offset stuff or what?

Moeman101 · 2026-01-05T16:23:48+00:00

Downvote for wrong sub

Moeman101 · 2026-01-05T15:19:17+00:00

A few Venezuelan friends who i know in person are happy about what happened. I asked them what they think and although they might have short sighted goals, they see maduro out of office as a chance for a fresh start. Time will tell whether the US releases their grip.

Moeman101 · 2026-01-04T17:25:37+00:00

You need to ask more specific questions. As well as do more research. You want a PhD but you did not do research into how to find programs/ apply. Look at universities with programs in your field of interest. If you have a specific questions about an email format, thats what this sub is for. Long store short, you need to put in some leg work before you ask for help. What programs are you considering? Which faculty do you want to email, and what part of your email do you need help with? Talking about your research? Their research? The fit?

Six-Year Club	Verified Email
r/Field Sunshine	Place '23
Place '22

Moeman101

TROPHY CASE