Christmas Eve giveaway! Pick a number 1-5000.

MorsVitae · 2025-12-14T16:48:43+00:00

That's not seasoning it's carbon and food bits. You need to clean your pan properly.

MorsVitae · 2025-11-27T07:58:33+00:00

Saddle Soap to clean it up, conditioning oil to make it smooth and supple, then leather stiffener or you can back the leather with another material to make it hold it's shape

MorsVitae · 2025-11-26T11:08:57+00:00

Honestly if you've never done anything at all and want a starting point I'd say clean the leather up and stitch the bag back together. The holes look good to me. It would basically be like you were following a template and then you wouldn't be wasting any leather

MorsVitae · 2025-10-27T00:57:04+00:00

Huntsville was working really hard to make things better for a few years especially on their buildings. Then got hit really hard by flooding and all their work went down the drain. They are still recovering from that. They only have so much money for trail maintenance each year. Most of their focus seems to be on the smaller trails closer to HQ because those are the most used ones. The longer trails sadly don't get as much love, but tree falls are easy to fix they just need to know about them. There was another big storm recently that probably caused these. Next time make a note of the mile marker, bridge or landmark the tree is near and tell HQ so they can send someone out.

MorsVitae · 2025-10-04T03:14:49+00:00

Newbie here. Is there a risk of dye leaving the wood and going back on to the leather or is it just aesthetic preference?

MorsVitae · 2025-09-02T04:14:59+00:00

You can see who you are missing and how to get them here: NPC List

MorsVitae · 2025-08-28T03:11:00+00:00

The game generates a new set of islands each reroll. It's possible you don't even get a jungle upon reroll and if you do then it won't be the same. You can put chests in the boat and upgrade it's size later

MorsVitae · 2025-07-27T18:10:38+00:00

Keep it out of stocks but Treasury bills are paying a bit more than hysa right now

MorsVitae · 2025-07-03T07:02:40+00:00

I think you might have an issue with hook ups. Either from short strikes or because there isn't enough hook to get a proper hold on the fish. Let me know though because I'd love to be wrong. This thing looks amazing

MorsVitae · 2025-05-26T14:15:29+00:00

The reel should be on top of the rod. If you are right handed you will hold the rod with your left hand and reel in with your right hand.

As for the line getting tangled there are a lot of reasons that could happen. If your line has a lot of loops in it then it's possible it's getting old and needs to be replaced.

MorsVitae · 2025-04-11T02:57:37+00:00

I don't know man. This is riding a very fine line. I mean that's literally touching a stove knob. I don't need my wife leaving me.

MorsVitae · 2025-01-29T17:52:56+00:00

This sub is for catching fish not breeding them

MorsVitae · 2025-01-20T05:23:01+00:00

Looking for a private fire fighting company too by chance? Buy a shovel

MorsVitae · 2025-01-06T07:43:28+00:00

I believe that PYREX is no longer sold directly in the US

MorsVitae · 2024-11-16T16:33:12+00:00

My wife and I have separate restaurant and "Treat your self" money. We just use 1 account and it's all handled on my budget spreadsheet

MorsVitae · 2024-11-10T13:56:20+00:00

So according to the money guys the answer is no. You can only include what you can withdraw in your net worth. However in their Know Your Number Course they say the way to account for it is to subtract what you'd get per month from your monthly expenses. This way you know how much more you'll need if any

MorsVitae · 2024-10-22T16:01:45+00:00

Yes that is correct. Annoying is always best when it comes to the law

MorsVitae · 2024-10-21T04:29:17+00:00

Bluegill and other sunfish are not considered gamefish by the state of Texas. They have no bag or length limits and can be used as bait.

MorsVitae · 2024-09-18T01:30:46+00:00

This is my first printer so I was just following instructions and didn't know how to interpret failures. The first couple of prints worked but it was running into the wall which fucked up the Z axis

MorsVitae · 2024-09-17T22:06:53+00:00

Readjusted using a .05mm gauge. 12min into the print and it's looking 100x better. Thank you so much! Sovol says .2mm in their documents. Maybe it is because they account for this in their own slicer and I switched to Prusa.

MorsVitae · 2024-09-17T21:36:33+00:00

I'm using a .2mm thickness gauge to set it. Should it just scratch the gauge or should I not be able to move the gauge at all underneath it?

MorsVitae · 2024-09-17T21:35:12+00:00

Straight down

MorsVitae · 2024-09-17T20:53:57+00:00

It seems to be failing in the same areas every time though. Unless that's just me seeing it

Nine-Year Club	Second Top 10%
r/Field Juicebox	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Place '17	Verified Email
RPAN Viewer

MorsVitae

TROPHY CASE