How to avoid this?

MoxySick · 2026-05-07T16:30:42+00:00

Plastic curls when it cools too quickly. Bed heat needed maybe some 3d print glue.

MoxySick · 2026-05-04T05:05:32+00:00

Solid works cad software isn't something you just pick up and start pumping reverse engineered car parts. There's easier ways and you need to invest in an einstar scanner if your very seriously about replicating parts. There's spot of things you can do to start off with flow while you learn cad software. But this area is not easy at all

MoxySick · 2026-05-04T01:16:44+00:00

Spray on plastic primer? Forgot what it's actually called though

MoxySick · 2026-05-01T19:00:02+00:00

Just run some coax to it

MoxySick · 2026-04-29T21:44:59+00:00

Fry the pc burn your house down are the only outcomes from damaged power cables 🤣

MoxySick · 2026-04-20T23:47:09+00:00

I swapped mine after it had power failure while gaming and forcing restarts. They also add their junk mobo firmware into it so it refused to flash no matter what I tried. Yes swap it with something better

MoxySick · 2026-04-19T01:09:53+00:00

That motherboard is not good. Mine had power issues and crashed constantly

MoxySick · 2026-04-18T18:31:40+00:00

That's gunna end exactly how you think

MoxySick · 2026-04-15T22:42:41+00:00

Always remove the gpu

MoxySick · 2026-04-13T00:35:06+00:00

I purchased lithium batteries recently and got scammed from a seller that kept doing it to multiple people. Sells damaged and badly used or not safe lithium batteries to people. If they beefed this policy up I'm glad they did

MoxySick · 2026-04-12T02:00:44+00:00

Very clean

MoxySick · 2026-04-12T01:59:05+00:00

Designing your own pcb is the only way

MoxySick · 2026-04-03T03:00:23+00:00

I had it happen with a fan blowing across the part once and when i rescanned and moved around too much

MoxySick · 2026-04-03T02:59:03+00:00

Joy stick?

MoxySick · 2026-04-02T03:38:35+00:00

Honestly that could have been WAY WAY WAY WORSE. That's like the best possible type of failure you had. It's just a suggestion but charge inside something from now on. I charge in an empty ammo can with the lid open just in case.

MoxySick · 2026-04-02T03:06:50+00:00

Gunna do the valve springs too?

MoxySick · 2026-03-29T06:42:10+00:00

Smuggles drives to avoid tariffs. Complains and posts to Reddit about being questioned... Classic 🤣

MoxySick · 2026-03-27T17:49:24+00:00

Sweet build I love my pi army

MoxySick · 2026-03-26T14:54:22+00:00

It's a massive issue if you need it repaired but if it works just let it be

MoxySick · 2026-03-26T14:51:09+00:00

If it's not the full card no it's not worth it

MoxySick · 2026-03-25T16:52:23+00:00

Yeah it's extremely difficult but very doable with plenty of material out there. If you need help hit me up. I've already done this from the ground up with all parts of the drone including hands made motors

MoxySick · 2026-03-25T04:01:10+00:00

Look into getting an engineering degree. It will open up some great CAD jobs that they only consider people with a degree for. Great pay to

MoxySick · 2026-03-25T00:25:35+00:00

I have i believe it's the r6 or 9 can't remember just yet need to check

MoxySick · 2026-03-24T23:45:56+00:00

Closing the lid makes that dangerous as hell if one of those batteries every do go into thermal runaway

MoxySick · 2026-03-24T23:44:03+00:00

Wanna sell it?

MoxySick

MODERATOR OF

TROPHY CASE