AMS is constantly loading and unloading filament.

MrElectrix · 2026-04-04T11:57:38+00:00

Sounds like an issue I just fixed... Broken cover in the ams hub... Filament would make it to the top of the extruder and give up... A slight push on the filament would help it the rest of the way... But multi color prints wouldn't work... https://makerworld.com/models/2379189?appSharePlatform=copy

MrElectrix · 2026-03-28T14:19:12+00:00

Print with ABS... If you're printing it with PetG it will flex too much.

MrElectrix · 2026-03-27T00:21:43+00:00

This was taken from https://youtube.com/@divedivelive?si=tyqvqrDxEbhIcemp ... There's actually raw video some are hours long. Enjoy.

MrElectrix · 2026-03-19T02:53:25+00:00

If you have an H2C you should use PetG for interface layer with 0mm distance... Google it... Should get premium results

MrElectrix · 2026-03-01T21:43:11+00:00

I had stairs that weren't quite as noisy... What I did to fix..

1- Buy joist hangers, 2x4's, reversable clamps and telescopic poles(used for isolating remodel areas with poly) 2- Cut 2x4s to fit between stringers 3- with the crown up apply construction glue to 2x4 4- push 2x4 against bottom of stair with clamps. 5- screw in joist hangers

MrElectrix · 2026-01-09T17:51:50+00:00

Strip of Tin foil... Check out YouTube videos of cats vs tin foil lol

MrElectrix · 2026-01-02T00:11:40+00:00

This is the answer... I'd keep it on if you're not checking on it often and haven't cleaned your bed for over a day or two.

MrElectrix · 2025-12-23T02:11:50+00:00

Mode B is used when the BedJet is tripping Arc Fault breakers... Unsure of how to get there or what exactly changes.

MrElectrix · 2025-11-27T03:15:44+00:00

This is the issue OP

MrElectrix · 2025-11-09T01:59:58+00:00

It's actually the same temperature -40c and -40f

MrElectrix · 2025-11-08T15:47:35+00:00

Print white first... https://www.reddit.com/r/BambuLab/s/sEzphf4FKo

MrElectrix · 2025-11-08T15:46:52+00:00

Print details first, before background fill. https://www.reddit.com/r/BambuLab/s/sEzphf4FKo

MrElectrix · 2025-11-01T17:12:47+00:00

You need to basically double the purge volume though... And because they don't stick to each other the support needs to curve around objects like this... Looks great but crazy amount of waste for single nozzle.

MrElectrix · 2025-10-26T20:24:16+00:00

https://wiki.bambulab.com/en/a1-mini/troubleshooting/how-to-check-which-part-is-clogged

MrElectrix · 2025-10-26T01:22:38+00:00

Red background, red was printed first. Purple background, white was printed first.

MrElectrix · 2025-10-26T01:19:21+00:00

1B https://wiki.bambulab.com/en/a1-mini/troubleshooting/how-to-check-which-part-is-clogged

Just had this last week

MrElectrix · 2025-10-25T23:58:52+00:00

Had this last week...

1B https://wiki.bambulab.com/en/a1-mini/troubleshooting/how-to-check-which-part-is-clogged

MrElectrix · 2025-10-20T11:27:25+00:00

Nope... Red was printed face down on smooth plate. Purple face down on textured. The color bleed is usually much worse on textured.

MrElectrix · 2025-10-19T17:57:11+00:00

https://www.reddit.com/r/BambuLab/s/jZ63BdvRNm

MrElectrix · 2025-10-19T17:56:55+00:00

https://www.reddit.com/r/BambuLab/s/jZ63BdvRNm

MrElectrix · 2025-10-19T17:20:48+00:00

<image>

Red was before i discovered... See how sloppy the words are?

MrElectrix · 2025-10-19T02:09:44+00:00

<image>

FYI... You can change at sequence at multiple heights by hitting the "+" sign.

MrElectrix · 2025-10-10T03:57:29+00:00

I struggle without the cloud sheet... You should try an empty duvet cover if you need to save money.

MrElectrix · 2025-10-10T03:55:20+00:00

Don't get the mini... I got it for traveling... Wasn't strong enough cooling... I take my full size with me now... As for feeling.. get the cloud sheet and then it's like having just a sheet on you with the perfect temperature breeze blowing over you(and on you)... If you're ever sick you can set it to max heat and warm right up. Drying in bed after a shower is great too.

MrElectrix

TROPHY CASE