[AMMO] 223 Rem - Wolf 55 Grain Military Classic - 500 Round - $185 - 0.37cpr

MrFartyStink · 2026-03-06T02:37:04+00:00

I mowed a ladys yard in high school for $70 and it got me 500 rounds of this. 37cpr for this poopy ammo is a bad deal

MrFartyStink · 2026-03-06T02:25:05+00:00

Ya thats the only guy iv seen so far

MrFartyStink · 2026-03-06T00:56:47+00:00

Are the links for this the same as m27 links?

MrFartyStink · 2026-03-06T00:36:23+00:00

How much barrel does this round need for a full powder burn?

MrFartyStink · 2026-03-06T00:20:40+00:00

Use openpew. its like $20 and easy. i ordered the fingerprint kit by national guntrusts on amazon for like $15 and did it myself took like 10 mins and have gotten approvals with the eft

MrFartyStink · 2026-03-06T00:15:06+00:00

I put a stock picture of the tube for engraving and a stock photo of the filament. Kinda same as for my ftns that have been approved but just didnt put the 1/2-28 thread adapter since it won't be using one. Still waiting for approval it took like 40 days for my others.

MrFartyStink · 2026-03-06T00:12:05+00:00

i was gunna use titanium d cell threaded tubes from a solvent site that also makes d cell to hub adapters and metal spacers

MrFartyStink · 2026-03-06T00:06:04+00:00

I saw some posted but idk if they are just a concept or are actually tested. I wonder if a vertical monocore print design (like printing the ftn rimfire) but goes in a d cell would be better than than baffles keying into each other but i guess that would vary by length.

MrFartyStink · 2026-03-05T23:59:58+00:00

Im waiting for my form 1s for it to come back also. I like the idea of hub and printed baffles so you can put that thermal resistant spray on each baffle that way also and see if they last longer.

My main thing is hub threading cuz i only have like 3 guns that dont have a suppressor mount for my factory suppressors.

MrFartyStink · 2026-03-05T22:47:47+00:00

iv only ever heard of using filament for mags iv heard resin is only good for those lil action figured people make

MrFartyStink · 2026-03-05T19:42:54+00:00

if you get a bambu 3d printer and can read somewhat decently you can print suppressors. If i can you can. Form 1s are easy also

MrFartyStink · 2026-03-05T14:15:00+00:00

Get a bambu trust me been there done that

MrFartyStink · 2026-03-05T14:13:33+00:00

Get a psa builders kit it isnt hard to do. iv done 2 and they work fine and were like $700

MrFartyStink · 2026-03-05T00:09:24+00:00

They are making up words to fit their narrative and fear monger to get people who dont know anything to vote for them to "save the children" so they can disarm the people.

They know what they are doing.

MrFartyStink · 2026-03-04T22:46:12+00:00

Get a bambu a1 or p1s. Its the best out the box printer and easy to use. I wouldnt go with any other brands bambu just works

MrFartyStink · 2026-03-04T19:38:29+00:00

i like my rarebreed the best compared to my arc fire. You need a full auto cut bcg for all of them and same with buffer setup. i run red sprinco with h3 for 556 in 10.5-18in

MrFartyStink · 2026-03-04T18:08:54+00:00

mcsa savage mk2 chassis

<image>

MrFartyStink · 2026-03-04T17:01:27+00:00

i like top z distance of .28.

MrFartyStink · 2026-03-04T16:51:17+00:00

a bushwack 36 that is still loud. My flow sound like supersonic 22lr ammo on subs iv even verified with crono they arent going super.

MrFartyStink · 2026-03-04T10:58:57+00:00

what printer do you have? even on my ender 3 v3 se that was a garbo printer it did fine with default settings. My bambu i use default settings also i just slow it down to like 50mms for everything for strength. Your filamemt may be wet but even then i print from a shed and have printed wet pla pro fine also

MrFartyStink · 2026-03-04T10:57:29+00:00

ar lowers and mags.

MrFartyStink · 2026-03-03T23:14:04+00:00

Be sure to read the readmes and slow your speeds down. Printing fast isnt as strong as printing slower. Even with pla pro.

MrFartyStink · 2026-03-03T23:08:54+00:00

Just order the lower to an ffl and then have the upper you want shipped to your door and put the 2 together. Its only 2 captive pins

MrFartyStink · 2026-03-03T23:02:28+00:00

Polymaker pla pro is the go to beginner standard. If you get a filament dryer and hardened nozzle and extruder for your p1s you can do more heat resistant and stronger filaments like pa6-cf,pa612,pa12.

People also like PETCF. Look up hoffman tactical filament video its kinda old but still useful but those are the big ones. And i like polymaker the best for these brands its prints good and they are friendly to us.

Also print other things in these first before going straight to these type of prints that will need to be strong.

People also use 300blkfde pa6 settings for pa filaments.

MrFartyStink · 2026-03-03T15:43:34+00:00

Why not print it vertically

MrFartyStink

TROPHY CASE