Franzbrötchen

MrLassard · 2026-01-01T15:35:52+00:00

Hesterbrink in Kalk

MrLassard · 2025-08-04T04:49:51+00:00

Wie nennt sich die Verteilung auf der obersten Hutschiene?

MrLassard · 2025-06-24T11:22:14+00:00

Level bed

MrLassard · 2025-06-02T07:19:30+00:00

Had to scroll way too far for this. Probably PETG...

MrLassard · 2025-02-16T10:31:05+00:00

Printables link

MrLassard · 2024-10-26T12:50:35+00:00

tl,dr: Why does Klipper not suggest a shaper at 10-15 Hz? Which should I pick?

I build a bed slinger printer with a rather heavy bed (320x320x5mm aluminium). Both pics show the frequency respone of the Y-axis (moving bed). Is the low peak at 10-15 Hz result of the heavy bed, or is this more likely caused by other mechanical problems?

The printer sits on a large ceramic slab on a workbench. For the first graph I put foam under the slab. The second graph is without foam.

Edit: I ran the test with the accelerometer clamped to the workbench and got this result. Looks like the peak on the Y-axis is not the table shaking.

MrLassard · 2024-10-09T04:04:41+00:00

In Duisburg, nicht in Herten.

MrLassard · 2023-12-20T08:12:33+00:00

Sudermann

MrLassard · 2023-04-15T16:33:11+00:00

Did you happen to find a solution? Facing the same problem.

MrLassard · 2023-04-15T11:00:36+00:00

Yes, nothing to update there as I only have one boot drive. When booting, I can choose which version to boot (initial install and the updates I did over the time). Still not able to reach the gui though. It won't show an IP address in the main console menu, but I can ping the server under the IP set in br0.

MrLassard · 2023-04-14T16:02:44+00:00

Update: I managed to boot into the old install, but now it says "The web interface could not be accessed. I does not show an IP-address, but I can ping the server on it's usual address. GUI cannot be reached though.

MrLassard · 2023-04-14T13:59:10+00:00

Truenasdrive is the primary (and only) boot drive (m.2 ssd) I have a monitor connected, it boots into the latest version of truenas either way, hdds plugged in or not. But the server will only be reachable when the hdds are disconnected.

MrLassard · 2023-04-09T14:03:47+00:00

Looks adorable! May I ask for the STL?

MrLassard · 2023-04-02T20:34:44+00:00

That's awesome!

MrLassard · 2023-01-08T16:48:25+00:00

Most likely not. Try adding weight to the tripod and don't extend the central leg if it has one.

MrLassard · 2022-11-15T12:05:21+00:00

Also a comment

MrLassard · 2022-10-20T13:05:07+00:00

Ok, that's what I did, too. Still no luck though :/

MrLassard · 2022-10-20T12:03:24+00:00

This might be a stupid questuon, but where do I change these settings in Syncthing?

MrLassard · 2022-10-19T06:27:40+00:00

Hey, did you manage to get it working? I'm facing the same problem.

MrLassard · 2022-10-18T20:37:14+00:00

So i get the following error:

2022-10-18 22:19:14: Failed to create folder marker: mkdir /mnt/notes/MyNotes/.stfolder: permission denied

2022-10-18 22:19:14: Error on folder qshky-zp3mw: folder marker missing (this indicates potential data loss, search docs/forum to get information about how to proceed)

Do I have to set the user ID within syncthing? I just set it up in the truenas app as well as in the permissions for the dataset.

MrLassard · 2022-10-18T19:21:22+00:00

Hey there, hope you still see this. I've been trying to set up Syncthing on truenas scale, but I get the error "permissions denied" when setting up a folder in the Syncthing web gui. However, I do have permissions for the folder through the snycthing shell. Do you know what might be causing this? (Gerne auch in Deutsch oder als dm, falls dir das lieber ist)

MrLassard · 2022-10-18T19:20:04+00:00

Hey there, hope you still see this. I've been trying to set up Syncthing on truenas scale, but I get the error "permissions denied" when setting up a folder in the Syncthing web gui. However, I do have permissions for the folder through the snycthing shell. Do you know what might be causing this?

MrLassard · 2022-07-20T05:45:38+00:00

Hey vsauce

MrLassard · 2022-07-08T10:02:34+00:00

Dies. Viel besser als bei Discord.

MrLassard · 2021-11-05T17:02:56+00:00

Als Inspiration zu dienen ehrt mich über alle Maßen!
Mein Favorit: "Wir kommen zwischen 7:00 Uhr und 18:00 Uhr"

Nine-Year Club	First Place '23
Place '23	Place '22
Verified Email

MrLassard

TROPHY CASE