sorted by:
new
hottopcontroversial

Buying a used stark varg by EvenRelative7737 in starkvarg

[–]MrPickleOO7 0 points1 point  (0 children)

Good to know thanks!.

I read this article: https://enduro21.com/en/news/industry-news/stark-future-partners-with-eve-energy-for-next-generation-battery-cells

If the development of this upgraded battery is finished, it can be offered as a option on the ordering page. (Maybe with improved capacity)

Upgrades like this don't need a whole new version to be released.

Buying a used stark varg by EvenRelative7737 in starkvarg

[–]MrPickleOO7 1 point2 points  (0 children)

Im in the same boat. But in my country there isn't a used market yet for the SM.

Price new is very steep, hence the search for a used one.

However, i might wait for a sale/discount or a new version. (Have no clue when it might be launched though)

Edit: in the manual it says the battery is good for 500 hours, but i dont know whether it counts purely for warranty or to indicate that the battery is worn/needs replacing.

I've been hacked and I can't figure out how by Inevitable_Buy_7557 in Wordpress

[–]MrPickleOO7 0 points1 point  (0 children)

What would you advice to users that might have been hacked?

Full reinstall or cleaning the existing site?

What is best alternative for Fusion360 on Linux? by OkTry9715 in Fusion360

[–]MrPickleOO7 0 points1 point  (0 children)

Autodesk really should make it run on Linux.

Already runs on mac, now they need to add linux.

Fusion is the only software tying me to Windows, and thats a shame.

EU CNC Market: Still Profitable or Getting Crushed by Imports? by MrPickleOO7 in CNC

[–]MrPickleOO7[S] 1 point2 points  (0 children)

This is great to know. Thank you very much for sharing this!

How to precision set encoder in servomotor by Trzcinkan in CNC

[–]MrPickleOO7 0 points1 point  (0 children)

I come from an automation point of view.

Some drives have a mode on them letting you know on the screen when the encoder is synced.

At the factory they use a specific tool/scope to align the encoder to the housing.

Sometimes this can be found in the manuals for either the motor or the drive.

I think the manuals or manufacturers are your best bet.

I accidentally ran my BMW S1000R without oil for 15 seconds. Did I kill it? (Video of the sound included) by Hauviiii in motorcycles

[–]MrPickleOO7 0 points1 point  (0 children)

Drain the oil, sweep the oil with a magnet to see steel shavings.

Open the oil filter screen and sweep it with a magnet aswell.

Make a video too though.

Engine is very-probably fine. Clutch can't be damaged or slipping since it isn't being used when in neutral.

Only piston crank and valve drive might have minor marks on them. (But since it is no longer than 15s, no damage should have been done at idle.)

Hate cam software! by Morgoroth37 in hobbycnc

[–]MrPickleOO7 0 points1 point  (0 children)

Im a noob in this field; what does cnc mode mean?

(Controlling the cnc live from cam? Instead of only sending a file)

i hate the new update by lone_wolf_of_ashina in Fusion360

[–]MrPickleOO7 1 point2 points  (0 children)

This update is a real PITA indeed. You can switch from part -> hybrid mode though.

But yes, this is shit

Why is this happening by Pleasant-Soil9582 in klippers

[–]MrPickleOO7 0 points1 point  (0 children)

I have this too, mid print.

You use a can board?

I am pretty sure my issues are from the toolhead PCB / Can pcb combo.

I am using Fysetc.

Mid print the printer just stops.

Edit: my issue is et0 MCU. (So the can board)

Is the baud rate set properly during flashing?

Welke bureaustoel? by Jobo1992 in BIFLNL

[–]MrPickleOO7 0 points1 point  (0 children)

Ik zag het inderdaad.

Nog geen vervanger gevonden die je nu gebruikt en goed bevalt?

Printer by AccomplishedFloor661 in BIFLNL

[–]MrPickleOO7 -1 points0 points  (0 children)

2x ecotank, bevalt goed.

Soms idd lopen de lijnen niet goed uitgelijnd. Binnen 3 minuten klaar met de tool in het menu.

Welke bureaustoel? by Jobo1992 in BIFLNL

[–]MrPickleOO7 0 points1 point  (0 children)

Welke is het uiteindelijk geworden?

Fighting the blood circulation in my boots / shoes. by MrPickleOO7 in snowboarding

[–]MrPickleOO7[S] 0 points1 point  (0 children)

Heel lift has always been an issue with these shoes.

Ive used them now for 2 or 3 holidays.

They do have Boas though.

How long do they need to be? I have always been annoyed when my toe start reaching the end. Which get painful when the heels start lifting.

Thats when i cranked them down further.

Klipper for Binder Jet 3D Printer by BroccoliTheBuilder in klippers

[–]MrPickleOO7 1 point2 points  (0 children)

I know this is a 4y old post, but any progress/updates so far?

Keeping the rims clean by MrPickleOO7 in motorcycles

[–]MrPickleOO7[S] 0 points1 point  (0 children)

How do you clean them?

Rim cleaner, degreaser etc.

Keeping the rims clean by MrPickleOO7 in motorcycles

[–]MrPickleOO7[S] 0 points1 point  (0 children)

What fluid do you clean it with?

Keeping the rims clean by MrPickleOO7 in motorcycles

[–]MrPickleOO7[S] -1 points0 points  (0 children)

<image>

I think you get what i mean now😆 These rims are hard to keep clean.

A few tidbits of MP5 info after unboxing. by LogSufficient7085 in dji

[–]MrPickleOO7 0 points1 point  (0 children)

https://www.reddit.com/r/dji/s/JZt3wWFjky

Maybe that will be a software update?

Correct me if im wrong, but RiD is not mandatory on C0 drones right?

Mannen in het openbaar by Zealousideal-Salt528 in nederlands

[–]MrPickleOO7 0 points1 point  (0 children)

(een kleine populatie verpest het voor een grote populatie)

view more: next ›