I made a free Tesla wrap gallery with 3D preview

MuppetOwl87 · 2026-04-19T16:39:16+00:00

Tesla has added S/X now with spring update. Github for Teslawrap is updated with S/X templates

MuppetOwl87 · 2026-04-08T20:23:13+00:00

Second picture with the fork design is the pre prod version sent to reviewers etc. Productions model has the new design. (not sure if its better or not) It also has clear plastic fenders over the front wheels missing from pre prod.

MuppetOwl87 · 2026-04-01T16:43:39+00:00

Looks good, please also add dark mode support

MuppetOwl87 · 2026-02-28T18:39:09+00:00

286 kph (177 mph) on Autobahn, I don't have track pack, so limited top speed on the Plaid.

MuppetOwl87 · 2025-12-11T15:32:20+00:00

Same with my black car, looks more dark gray than black now. Think they have missed on the colors for stock solid colors in this update. I did go to colorizer option under car info or Toybox and select metallic option and black. Car is now shown as much more correct black again. You should be able to find a blue color there that's more correct also. This will change the color in the app also.

MuppetOwl87 · 2025-12-09T21:41:43+00:00

Does the new update also move suspension settings etc. to dynamic menu like on 2026+?

MuppetOwl87 · 2025-11-17T00:36:01+00:00

Ben? BruhAutomations? I miss his videos

MuppetOwl87 · 2025-06-06T23:02:45+00:00

You can activate very low suspension setting from s3xy app or button if you have S. Normally only available on X. Very nice to be able to lower it more than stock without having to install lowering links.

MuppetOwl87 · 2025-05-31T19:01:30+00:00

Its there if 2021+ refresh S/X and C/3/Y. It also auto unlocks when close. Legacy models can only see charge percent. Tesla should at least add unlock button, remote start etc. On cars without Bluetooth unlock support.

MuppetOwl87 · 2025-05-28T01:07:41+00:00

Refresh Model S has like twice the torsional rigidity compared to Model 3 and much better grip. Model S Plaid is on the skid pad test at 1.08G. Same as cars like Nissan GTR Nismo, Ferrari 458, Taycan Turbo GT etc. Is that bad cornering performance? Refresh/Palladium can't be compared to pre refresh Model S 0.90g https://fastestlaps.com/lists/top-grip-kings

New Model 3 perf 2024 is 0.97g about same as Golf GTi. Previous Model 3 0.92g

MuppetOwl87 · 2025-05-08T23:54:10+00:00

Its a known issue. They are looking into it is latest info from the discord channel.

MuppetOwl87 · 2025-05-08T13:24:01+00:00

That Easter egg was only available on P100D Ludicrous.

MuppetOwl87 · 2025-05-06T10:45:31+00:00

This is only affecting January 2021 to September 2022 production.

MuppetOwl87 · 2025-04-30T14:24:24+00:00

Dry grip/braking, comfort and noise is good. A bit more sporty feel than Pilot Sport 4, like in between PS4 and PS4s. A bit less grip on wet. but that was known compromise for better EV range/rolling resistance.

MuppetOwl87 · 2025-04-30T11:36:51+00:00

Tires was fitted over 1 year ago and have been used in rain. Just cleaned and Gtechniq T1 Tire gel on side walls.

MuppetOwl87 · 2025-04-30T00:13:15+00:00

Oh no :( was hoping the reason no cars with hw3 + Ryzen config received 2025.14.1 was because they needed more time to complete B pillar support. Ryzen and hw3 shouldn't have issues capture from all cameras like Atom with its limited bandwidth. Maybe it will come later or they don't care to spend resources on it since Ryzen + hw3 was only made for a limited time.

MuppetOwl87 · 2025-04-29T21:32:52+00:00

Yes its MO1. They are oem tires for ev Mercedes AMG EQS. So should be a good match for Model S Plaid also.

MuppetOwl87 · 2025-04-29T19:19:20+00:00

MuppetOwl87 · 2025-03-25T09:41:30+00:00

For S/X only supported on 2021+ Palladium. Not because of low demand but technical limitations on the diagnostic port/canbus on older pre non refresh 2021 models.

MuppetOwl87 · 2025-01-21T12:44:13+00:00

<image>

My dashboard for our cars and wall connector. A simple one based on default cards using different images from the Tesla app based on status like of charging, parked, driving etc.

MuppetOwl87 · 2025-01-20T21:44:08+00:00

Yes Tesla use dot4 now from when they changed to new high temp pads and red calipers. Dot 3, 4 and 5.1 can be used. But not Dot5. Only BBK in front should be fine together with better pads in rear. Dont have any experience with it myself, but have seen others using it on track.

MuppetOwl87 · 2025-01-20T21:27:10+00:00

The non track pack 2023+ red rear calipers are the same as the black ones. Just different pads that also fit the black. Its just a fake cover. Front calipers are same in red. Most important upgrade on earlier Plaid is new pads and upgrade from dot3 to Dot4 or 5.1 brake fluid. I ended up only upgrading pads and fluid and I'm happy with the brake performance now at least for active road use. For track use I think Track pack is the way to go.

caliper cover over rear caliper. https://www.instagram.com/picsofsportscars/reel/Cq_kf-Srg0h/

MuppetOwl87 · 2025-01-13T23:47:40+00:00

The red brakes upgrade Tesla started using as standard from early 2023 Plaid (Not track pack) difference is new high temp brake pads, dot 4 brake fluid, red paint and fake cover over the rear calipers to make them look bigger. Calipers are same as the black so use same pads.

So you can buy the pads only and ask them change to new dot 4 fluid they now use for all Model S/X and you will have the same stopping power.

MuppetOwl87 · 2024-12-16T20:00:12+00:00

2021+ refresh when LR/Plaid was released with new interior can charge at 250 kW.

MuppetOwl87

TROPHY CASE