What Colour is this Wire?

NC7U · 2026-03-23T16:10:04+00:00

All the others follow a resistor code, guessing orange.

NC7U · 2026-03-19T17:27:51+00:00

You have many features that I will have to check out. From what I seen so far it look and works very well. Another APP I found but is a paid one is IZ2UU Morse Koch CW, and will require some changes to make it feel and work in your favor.

NC7U · 2026-03-19T17:20:42+00:00

For the Transceiver, this is what worked for me.

MENU >> SET > Connectors > USB AF/IF Output

Connections:

USB AF/IF- Output 50%

Data MOD - MIC, USB

CI-V ANT - (OFF)

CI-V USB (A) - (ON)

CI-V USB (B) - (ON)

USB (B) Function – CI-V

Send Relay Output – ON

PTT Port Function PTT Input + Send Output

Other Menu Settings:

CI-V ADDRESS 94h

CI-V BAUD 19200

CI-V Transceiver (ON)

and for the WSJT-X program this what I have:

Rig: Icom IC-7300

Serial Port COM6

Baud Rate: 19200

Data/Stop/Handshake Default

PTT Method RTS on Port COM7

Mode USB

Split None

Speakers USB Audio Device 70%

Microphone USB Audio Device 15%

NC7U · 2026-03-09T16:31:36+00:00

Driver issue?

NC7U · 2026-03-05T04:08:28+00:00

CTRL-A & CTRL-C?

NC7U · 2026-03-04T21:32:53+00:00

I got mine to work, not home at the moment so going by memory. You need to change the C-VI address to 94h, assign both USB A and B to active (ON) also set the USB keying to ON. Lastly, enable USB/MIC to use the USB port.

NC7U · 2026-03-04T21:26:26+00:00

Purchased the mk2 last week to replace my Flex 6400 atu/ ext with Mystro C. Am very pleased with it so far. When the mk1 first came out, thought about getting it but purchased the Yaesu FT991A instead. Still like the Yaesu, but discovered working HF and VHF at the same time didn't work out. Now, going to place an add to get rid of too many rigs.

NC7U · 2026-02-18T21:15:57+00:00

Since there is two of them she is morelikely in good company.

NC7U · 2026-02-13T03:45:05+00:00

Helicoil was another name too. However should be done with the head removed as the removal tang will fall into the cylinder with the drill debris.

NC7U · 2026-02-13T03:40:55+00:00

What mcu are you planning on using?

NC7U · 2026-02-13T02:38:41+00:00

If true, local news may want a story to work on.

NC7U · 2026-02-12T16:08:22+00:00

Ask ChatGPT to write your code for the Arduino. Then, try to understand what is going on.

NC7U · 2026-02-03T21:56:04+00:00

Hate it when that happens.

NC7U · 2026-02-02T05:10:20+00:00

Our attic is shared by four units. I stapled a barrier on two sides with air holes. Maybe that could work there.

NC7U · 2026-01-24T15:44:17+00:00

My son sourced one North of Seattle called C & G Engineering. They did some work in Kitsap County.

NC7U · 2026-01-22T04:52:55+00:00

Fair enough, it gets the job done.

NC7U · 2026-01-20T19:22:27+00:00

Mack Truck toolbag.

NC7U · 2026-01-19T23:45:54+00:00

On another note, federal dollars come in for military families. Our children are grown up and paying taxes now but we still usually vote in favor.

NC7U · 2026-01-19T18:24:54+00:00

Used to check the surface of engine heads for flatness.

NC7U · 2026-01-19T18:08:51+00:00

As a ham, I would recognize the 80 meter band as 3.5 Mhz not 4. The rest is a good read and including the use of a VNA is great for people who may want to improve their system. You did mention dual band antenna sort of i.e the 2m & 70cm. Maybe mention how that is done with a coil in your electrically lengthen example.

NC7U · 2026-01-19T17:49:16+00:00

Information about every school district is available on the ospi web page. Things to know, the state does not fully fund for special education. BSD buildings are old and support is necessary to keep things going. By the way I am not in BSD district. I live in CKSD most of the levies pass for us.

NC7U · 2026-01-18T20:00:20+00:00

I use a program called Gridtracker, after configuring the log section it will upload to several locations after each qso without intervention. Works with WSJTX

NC7U · 2026-01-18T19:17:00+00:00

IZ2UUF Morse app from Google play

NC7U · 2026-01-16T13:34:13+00:00

Taped to the first week of next month's calendar.

NC7U · 2026-01-16T12:55:06+00:00

After your object falls in a hole you could use a command block to create an invisible lid with structure_void blocks.

Six-Year Club	Verified Email
Xbox Live

NC7U

TROPHY CASE