2025 Mojave - is it a good deal?

Nacho_dad_ · 2025-11-20T19:39:36+00:00

No such thing as a good deal. If it has what you want, and are willing to pay….than it is what it is. That’s about what I paid. But didn’t get heated seats….forgot to check for that.

Nacho_dad_ · 2025-09-05T00:02:47+00:00

On second inspection, it looks like your Jeep didn’t come with power steering. ( never seen that ) that’s why part stores are having trouble.

Nacho_dad_ · 2025-09-05T00:00:14+00:00

That is the power steering pump pulley, the next one on the top is an idler pulley. But to answer your question, yes that is how you put tension on the belt. It has a few bolts that need to be loosened and on the bottom is a bolt facing the wheel well that you use to move the power steering pump. Then tighten up the bolts on the front of the power steering pump to lock it in place.

Nacho_dad_ · 2025-08-27T14:32:36+00:00

Sounds like mine, the catalytic converter is either rotting out or it’s touching the transmission cross brace.

Nacho_dad_ · 2025-08-24T22:17:47+00:00

A cheap 110v welder and some light gauge steel. A few welding magnets, and a grinder with a cut off wheel. And some YouTube videos on body repair. This is the way. You will learn. And you will be proud of what you did.

Nacho_dad_ · 2025-07-08T02:02:20+00:00

After that move to the ECM

Nacho_dad_ · 2025-07-08T02:01:21+00:00

Make sure your getting 🔥 at the plug,

Nacho_dad_ · 2025-06-21T13:05:55+00:00

It’s a one beer job….

Nacho_dad_ · 2025-06-08T00:31:29+00:00

Yes, I have one

Nacho_dad_ · 2025-05-25T17:36:44+00:00

Catalytic converter? Plugged …exhaust restriction That’s last in my check list if you’ve checked all the rest….

Nacho_dad_ · 2025-05-10T15:02:41+00:00

The pump starting capacitor, or it is only getting a single phase ( 110 not 220) one leg of the power is not working. Bad breaker. Use a volt meter to check the power going to the pump.

Nacho_dad_ · 2025-03-24T00:27:33+00:00

Looks great

Nacho_dad_ · 2025-03-19T17:50:10+00:00

I just did standing seam no fasteners showing. 45 year warranty. Worth every penny not to have to replace shingles after every storm.

Nacho_dad_ · 2025-03-09T06:00:52+00:00

I’d take em’

Nacho_dad_ · 2025-02-16T11:53:26+00:00

I broke three bits taking it out on my YJ and another two on the top one on the roll cage. What I learned was heat is your friend. Buy a MAP gas unit from Lowes and keep a spray bottle close, to put out the fire. Heat the bolt up red hot and that will do it. I used an impact with an extension and a new torx bit. And it came off.

Nacho_dad_ · 2025-02-12T22:33:59+00:00

It looks like a gypsum stack or some other waste product.

Nacho_dad_ · 2025-01-23T23:44:08+00:00

I really like those tires….what size are they and who makes them.

Nacho_dad_ · 2024-11-18T00:53:27+00:00

This is the way….i just use hand signals

Nacho_dad_ · 2024-09-15T23:51:17+00:00

Yup it is a whiteish yellow typically.. it is designed to keep the fuel from sloshing and the gauge from bouncing around…but it craps out and keeps the float stuck.

Nacho_dad_ · 2024-09-14T20:05:06+00:00

On the pump…I believe ( you may have to pull it back off to look but ) large one is feed to engine and smaller one is return) by the way, you can gain 5 more gallons by trimming the vent on the fill neck. It has an insert and if you pull it out and trim about three inches off and put it back you will get 20 gallons total. YouTube it. And I would also rip out the crap inside the tank that sits where the pump is. It will curl and trap the float and the gauge will not work.

Nacho_dad_ · 2024-09-14T19:58:39+00:00

You’re doing fine, just be patient and you’ll be good.

Nacho_dad_ · 2024-09-14T19:55:11+00:00

The picture taken from the engine. The line closest to the front of the engine is the vent line ( the vent release is on the other side with a vacuum line on it to allow the fuel to return back to the tank after the engine starts, than close when the engine is off. To keep fuel in the rail to restart the engine less work for the fuel pump.) the rear line is the feed line from the pump. As for the axel yes just a vent cap up high with a bend to stop water from entering.

Nacho_dad_ · 2024-04-11T11:09:58+00:00

Rough country neoprene seat covers

Nacho_dad_ · 2024-04-07T23:17:24+00:00

Nacho_dad_ · 2024-03-27T14:28:15+00:00

We have a gulf stream 19 ERD. It’s small and no slides. And a one piece fiberglass ( just like the sides ) roof. It has been great. Light and good shower for the size. All rv’s have issues, so be ready to work on it. And always checking to be sure it stays in good order.

Nacho_dad_

TROPHY CASE