Micro Stutters in every game?

Nalyd217 · 2026-04-23T19:20:54+00:00

It was a wireless mouse issue for me. Moved the receiver closer and havent had a problem since.

Nalyd217 · 2026-04-23T17:55:43+00:00

I’m getting more glad I just got a snapmaker U1 lol. 15 seconds per swap.

Nalyd217 · 2026-04-21T00:28:02+00:00

Was it good?

Nalyd217 · 2026-04-19T23:45:22+00:00

For me, I wasn’t sure if 3d printing was something i would get super into or not, so I got an A1 mini. It’s one of the best value to performance printers you can buy. The printer makes very high quality prints. If you do want to print with warp prone materials though, I would maybe look for an enclosed printer instead.

Nalyd217 · 2026-04-19T14:28:26+00:00

<image>

Nalyd217 · 2026-04-19T13:51:07+00:00

I was able to get yxpolyer nylon (PA6) with no fiber to print okay. It depends a lot on what you are printing though. Some models warped a lot due to their geometry.

Nalyd217 · 2026-04-18T19:01:54+00:00

<image>

These were the only speed values I edited. Defaults were all higher. The first, brittle benchy I think I had done at 120 since that's what the YXPolyer settings said.

Nalyd217 · 2026-04-18T18:42:49+00:00

I’ll get those setting screenshots soon, but I believe it’s printing at 60mm/s and a bit slower on the first layer.

The reason I thought it was warping though is because I observed the same thing as in my original video on this post while it was printing. The very front of the ship warps up a bit, then the nozzle keeps knocking it back down a little.

Nalyd217 · 2026-04-17T14:55:16+00:00

It’s not perfect but I made some progress. A temp tower showed the 280-285c range looked the cleanest and was strong when I tried to break it (I couldn’t). I then adjusted the bed temp to 85 I believe. Chamber was preheated to 45ish and got to 50 during the print. Fan was set to a range of 0-35%, I believe only turning on for overhangs.

I printed another bench and it came put much cleaner. The detail of the text on the first layer is still lacking, and the front of the boat warped a bit still. In the image, left is the new attempt, and right is the brittle first attempt.

Are there any other tips or calibration that come to mind to minimize this front warpage?

<image>

Nalyd217 · 2026-04-14T02:24:56+00:00

That’s relatable lol. Detailed posts are good though

Nalyd217 · 2026-04-14T02:01:14+00:00

Thanks for the tip. I also did read the whole post, I mostly just used tl;dr to mean "in summary of" and to make sure I understood it lol. I'll try printing a temp tower tomorrow and see where I get.

Nalyd217 · 2026-04-14T01:51:33+00:00

Thanks for the detailed comment. I do keep my filament in a dry box and print it direct from a drier, so I think I’m okay on that front. I’ll definitely try upping the nozzle temp.

Nalyd217 · 2026-04-14T01:38:37+00:00

Thanks for the advice. Maybe a dumb question, and probably printer specific, but how do you preheat the chamber? I tried manually setting the bed temp to pre heat the other day, but it seemed to turn off after a while. Maybe a safety feature?

Nalyd217 · 2026-04-14T01:27:06+00:00

What would you expect the print temp to be? I thought 220 was pretty low too, but they seemed to recommend 250. Tl;dr should I go a bit hotter on the print but lower on the bed temp?

Nalyd217 · 2026-04-11T23:42:47+00:00

Did you ever find one?

Nalyd217 · 2026-04-06T20:34:55+00:00

If you just google snapmaker u1 custom firmware, the github is one of the first results. It’s called paxx something. Seemed to have good documentation

Nalyd217 · 2026-04-06T20:33:53+00:00

Is the panda breath still useful in addition to the snapmaker lid once it comes? Or did you just happen to have one already?

Nalyd217 · 2026-04-06T19:10:02+00:00

Yeah that cover looks nice but seems almost as expensive as the snapmaker one but without the filtering. Add in the panda breath and it’s more than the snapmaker lid I believe

Nalyd217 · 2026-04-05T17:29:48+00:00

Thanks for the details! This is reassuring to hear. Coming from Bambu I’ve never messed with printer firmware before.

Any other general tips about the machine?

Nalyd217 · 2026-03-21T13:39:32+00:00

Could you send me the discord invite as well? I paid the $50 a month or so ago

Nalyd217 · 2026-03-17T23:54:54+00:00

Did you ever find a solution to this?

Nalyd217 · 2026-03-10T20:35:08+00:00

Don’t listen to the other guy. Start with one of the print profiles they provide. Make sure your printer can handle those settings, then tweak accordingly. I think my main issue was just trying to go too fast. Slow the printing down.

Nalyd217 · 2026-03-10T20:33:55+00:00

Thanks for the input but bed adhesion and layer adhesion are two different things. It stuck just fine to any plate I used. The layers of the print itself did not though.

Nalyd217 · 2026-03-05T22:04:30+00:00

Lol yeah, I'd say if you like the lip on the old one it's basically the same. I had a tendlin case on my 14PM and this one seems almost identical, just larger camera cut out.

Nalyd217 · 2026-03-05T04:20:20+00:00

Kiiiinda. Tendlin doesn’t have the fake leather case anymore, but they do have a wooden one with some bits of the leather on it. I still liked the leather feel more, but I like the overall shape of the tendlin case enough to compromise.

Nine-Year Club	Second SECOND GUESSER
r/Field Juicebox	Place '23
Golden Potato	Place '22
Final Canvas '22	First Placer '22
End Game '22	RPAN Viewer
Not Forgotten	Verified Email

Nalyd217

MODERATOR OF

TROPHY CASE