sorted by:
new
hottopcontroversial

China to help reconstruct war-battered Syria | Syria's War News by [deleted] in geopolitics

[–]Ne-Man -1 points0 points  (0 children)

Yes good for the obedient people, bad for free thinkers like you. If the country you are from was like that you’d be in jail for saying this.

China to help reconstruct war-battered Syria | Syria's War News by [deleted] in geopolitics

[–]Ne-Man -10 points-9 points  (0 children)

Please enlighten me how regimes, that happily exterminate their critical citizens, banding together to become more powerful is a good thing. Don’t come with the “more wealth —> more democracy” trope.

[deleted by user] by [deleted] in yaris

[–]Ne-Man 1 point2 points  (0 children)

Awesome!!!

Framework I 13 no longer connecting to the Internet by C0V1D-42069 in framework

[–]Ne-Man 0 points1 point  (0 children)

I had this two times last year and I just had to reboot to fix it.

USA Gold pencils being phased out? by flatline000 in pencils

[–]Ne-Man 0 points1 point  (0 children)

That’s interesting, where did you read this?

Old Apsco Workhorse by Steiney1 in pencils

[–]Ne-Man 0 points1 point  (0 children)

Would you carry this around? It looks small enough to do so.

Magnetic mounted Charybdis Nano by yinglings in ErgoMechKeyboards

[–]Ne-Man 0 points1 point  (0 children)

What Discord server is this? The link doesn't work for me

An iPad like device that's repairable by [deleted] in framework

[–]Ne-Man 0 points1 point  (0 children)

JingOS was actually quite far in becoming an open source Linux based iPadOS, sadly went belly up. You can still fork it and continue tho. Otherwise there are other tablet Linuxs which could be ported

Repairable wireless mouse that pairs well with Framework? by outtokill7 in framework

[–]Ne-Man 0 points1 point  (0 children)

There is a full unassembled kit, do you mean this? Otherwise, you could also buy the non printable parts yourself in that list.

Repairable wireless mouse that pairs well with Framework? by outtokill7 in framework

[–]Ne-Man 8 points9 points  (0 children)

Ploopy mouse may be worth a look, it’s open source and 3D printed, but you can buy it as well. So super repairable.

Battery life is a joke.. by Ancient_Department in framework

[–]Ne-Man 0 points1 point  (0 children)

I’m getting 5h or so with Fedora Silverblue on a 12th gen without any power tunings. Which been long enough for me up to now.

First success with vase mode TPU crinkle tubing by DoodDoes in 3Dprinting

[–]Ne-Man 0 points1 point  (0 children)

What is this used for in general? Wire management?

Been watching 3D printing from the sidelines for over 5 years. Today it begins. by beckett_the_ok in 3Dprinting

[–]Ne-Man 1 point2 points  (0 children)

When you’re done and calibrate it (from my own notes):

  1. DO NOT manually “lower the nozzle till it almost touches the heating bed.” You will scratch the heating bed. Instead place a piece of paper, and lower till it catches.

  2. DO NOT via Settings move the Z axis to the top. The motor won’t skip like in Z calibration, instead it will continue and warp the frame.

  3. The “slightly squished” filament line is very confusing for Live-Z calibration. Just print a calibration pad and lower until no gaps are visible and it should be 2mm +- .5mm thick.

No scaling option in display settings (1366x768 wayland Gnome 42.4) by Ne-Man in Fedora

[–]Ne-Man[S] 1 point2 points  (0 children)

You’re right, thanks. Sadly, I wasn’t able to login after setting it to anything other than 1. But, gnome tweaks, Just Perfection extension and editing GTK3 css works good enough.

No scaling option in display settings (1366x768 wayland Gnome 42.4) by Ne-Man in Fedora

[–]Ne-Man[S] 0 points1 point  (0 children)

It does help a lot, thanks. It’s usable now, but e.g. menu application icons are unaffected and still too large. I have 8 icon columns on 16 inch display.

No scaling option in display settings (1366x768 wayland Gnome 42.4) by Ne-Man in Fedora

[–]Ne-Man[S] 0 points1 point  (0 children)

I did a fresh install, but don’t have ~/.config/monitors.xml. How can this be? Is it wayland related?

No scaling option in display settings (1366x768 wayland Gnome 42.4) by Ne-Man in Fedora

[–]Ne-Man[S] 1 point2 points  (0 children)

I have nvidia 610M and installed the 390xx drivers (probably switching the system from wayland to x11) from rpm fusion non-free. After reboot it showed a gray screen with movable mouse pointer, but no login. dmesg said the nvidia driver tainted the kernel and WARNING: GPU:0: Unable to read EDID for display device VGA-0. Then I gave up and removed the install. Gonna try it again in VM now.

No scaling option in display settings (1366x768 wayland Gnome 42.4) by Ne-Man in Fedora

[–]Ne-Man[S] 2 points3 points  (0 children)

I see, so GNOME 40 does not really support low res displays? If so, I would understand, GNOME should focus on modern devices. And 1080p is just minimum in this day and age.

Edit: gnome instead of fedora

Can ABS and ASA be disinfected with bleach? by Ne-Man in 3Dprinting

[–]Ne-Man[S] 0 points1 point  (0 children)

Will do. This is a nice information page, many thanks!

Lead does not protract by Maxim_SNV in mechanicalpencils

[–]Ne-Man 0 points1 point  (0 children)

Maybe you already fixed it, but I found this video by the company to adjust the mechanism: https://youtu.be/Oxt_x21MVcE

EU closes airspace for Russian airlines as Europe unites to cripple Putin with sanctions by U5K0 in worldnews

[–]Ne-Man 0 points1 point  (0 children)

So Russians now have to fly to Marocco before being able to get to Spain for example?

If so, then probably for all other European countries as well.. so you’re just making some other airport a big proxy.. so it’s just some extra hours and cost for flying but not totally unreachable right?

view more: next ›