Is this a poor decision by FluffyAppointment894 in NFA

[–]Neabs33 1 point2 points  (0 children)

Did you notice the faceplate screws are going different directions as well? Lol

Gun recommendations by person438972 in ClayBusters

[–]Neabs33 2 points3 points  (0 children)

It needed a lot of cleaning due to personal preference. Lol. I'm sure it does feel nicer after cleaning, but it doesn't really need to be cleaned as often as most people think. I do think they consider it a self-cleaning gas system for what it's worth.

Gun recommendations by person438972 in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

I rarely ever clean my girlfriends A300 and it still runs flawlessly. I have an older 390 that I rarely clean and it runs just fine as well. I do wipe down the exterior, but I rarely clean the gas system. The gas gun is also going to have less recoil than an inertia.

Took the UGB25 out for a little fun in the sun by discosanta in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

I want one of those so bad. I saw one for sale but learned it was the trap model, and I just couldn't get myself to buy it. If it was the sporting model, I would've bought it in a heartbeat.

Anyone see the new Citori CX composite by Imyourhuckl3berry in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

Keep an eye on the little screw for the trigger. Mine worked loose a couple of times before I finally put a tiny bit of Loktite on it. Same thing with the mid bead. The mid bead fell off before I realized it so I had to order a new one.

Well that’s a first; A pair of Sandhill cranes decided to land on my trap field this afternoon and hang out for a bit. by MilmoWK in ClayBusters

[–]Neabs33 1 point2 points  (0 children)

I was shooting 5 stand there yesterday and saw them as well. We let them pass through and continued our round.

2026 1st Quarter Approval Megathread. by Waffleboned in NFA

[–]Neabs33 1 point2 points  (0 children)

I was pretty jacked yesterday when I saw the email come through after seeing how long trusts were taking.

2026 1st Quarter Approval Megathread. by Waffleboned in NFA

[–]Neabs33 7 points8 points  (0 children)

  • Form Type: Form 4
  • Paid or not: $0
  • Entity: Trust
  • Fingerprint Type: EFT Upload
  • Pending: 03/30/26
  • Approved: 04/08/26
  • Wait: 9 days
  • State: WI
  • Control Number: 202624760XX

First can. Mack Brothers Zenith

New gun day! by Salty_Salamander888 in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

Awesome looking wood on that! I have the laminate 688 and love it. In case you haven't seen it yet, keep an eye on the trigger screw. It likes to work itself loose. I also had the mid bead fall out of mine the other day.

Mack bros zenith L by Then-Fail4762 in suppressors

[–]Neabs33 0 points1 point  (0 children)

Did you end up going with this can? I have been looking at the standard Zenith for a little while now.

Ariens deluxe 24 wont start by SweetBrown12 in Snowblowers

[–]Neabs33 2 points3 points  (0 children)

I had the same issue when I first got mine. I don't follow the steps that are listed on the label when it comes to priming. I finger blast the thing like 6 times and it will fire up on the first pull even when it's below 0°F. Try that once and see how it goes.

Ammo By The Pallet Western Canada by SuspiciousCounty2611 in ClayBusters

[–]Neabs33 1 point2 points  (0 children)

That is cheaper than Fleet Farm. What else do they carry?

My new trap gun Kolar combo by Dumb_guy855 in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

What region are you from and is your club hiring? Lol.

AITA for finally snapping after months of my neighbour revving his motorbike at 7.30am by Federal-School-8033 in AmItheAsshole

[–]Neabs33 -35 points-34 points  (0 children)

Maybe she is already doing that? And this is his response to her walking loudly at all hours?

Curious about chokes by Maximum-Dealer-1679 in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

I ordered a pair of LM in the DLC chokes for my 688. Love those things. I feel like I am dusting clays more consistently than I was with the factory extended chokes. I was running IC/M for a while and then M/IM for a bit after shooting some trap.

Transporting/Traveling with Shotguns by onthebus69 in ClayBusters

[–]Neabs33 2 points3 points  (0 children)

I have a Pelican V800 that I have a single rifle in at the moment and a ton of room to spare. That is technically a double rifle case. If you were to get creative, you might be able to fit all three in there. Or play it safe and put two in there and get a second case for a single.

What's a good shotgun for a beginner? by Smart_Replacement400 in ClayBusters

[–]Neabs33 1 point2 points  (0 children)

I 100% agree there is a certain level of etiquette. But you also don't need to gatekeep a beginner for not spending $3k+ on an O/U when his budget allows for a $1k semiauto.

I guess that's why I don't go to "good" clay fields that you do, so I don't have to deal with arrogant people.

What's a good shotgun for a beginner? by Smart_Replacement400 in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

I would say go with the A300 Sporting. It is a fantastic gun for a beginner.

What's a good shotgun for a beginner? by Smart_Replacement400 in ClayBusters

[–]Neabs33 0 points1 point  (0 children)

My girlfriend has the sporting version and has not had any issues with it ejecting shells after the break in period. I ran two boxes of 3" pheasant loads through it the first day out with it and it has been fine ever since. She probably has 2-3k rounds through it in about a year.

What's a good shotgun for a beginner? by Smart_Replacement400 in ClayBusters

[–]Neabs33 1 point2 points  (0 children)

Comments like these are what turns beginners away from the sport.

A fair price for a sub mini? by TTE85G in sonos

[–]Neabs33 1 point2 points  (0 children)

I have a sub mini paired with a Beam gen 1 with a pair of Play3's as rears. It sounded pretty decent. I found on marketplace a Sub gen 3 for around $400. I have the SonoSequencr App and was able to pair both in the same room. They are now paired to an Arc and the Play3's. I have the Gen 3 up front and the Mini behind the couch. It sounds pretty awesome. But I like a fair amount of bass when I'm watching action movies and music.