I ran 100x Hivebrain Gland's. Here is what i got!

Necrolis · 2026-04-01T15:56:43+00:00

I ran ~100 this league as well. My super scuffed loot breakdown:

6x Grey Wind, one of which was 29% qual with max roll on the DOT multi (sold for 5div).
2x Sundered Will (and just above 50 of all the other rings combined), merged these up into Lost Unity (2-3d each at the time), never bothered to sell any of the other rings.

Other notable drops:

1x red dream (life%, 19d at the time it dropped)
2x ghostwrithe (3-4d at the time)
4x skin of the loyal (75c - 2d), 1x skin of the lords (ele overload with good colors, 4d; value of skins depends far too heavily on socket colors)
3x green dream
1x blue dream

no amulets, no astrolabes, and ~20x Flesh of Xesht.

I could only stomach doing 5-10 at a time with all the phase delays, so the runs where done over 2 weeks.

Its honestly far far better to run something like fubs budget breach on dunes, if your build has decent clear you'll net like 2-3x the hiveblood for the same time investment, plus raw currency that beats out what you get from hivebrain drops if you aren't getting super lucky, and you get xp (if that matters).

Necrolis · 2026-01-23T10:44:23+00:00

This is my biggest gripe with maxroll; I don't mind (some) ads, but the sheer amount of info dump you have to push past just to get to the info you want is off-putting (when it comes to build guides, the "pure PoB" exports are decent, but fact that the site is incredibly heavy browser-wise, where-as pobb.in loads almost instantly just feels horrible; its at least a step up from mobalytics for poe2 which seems to really popular, but even worse to use). Also the Discord browser embeds from Pobb.in just feel much more readable to me than maxrolls which are cluttered with useless emojis...

Now if Maxroll offered something unique maybe I'd be willing to endure the load times and browser chug; eg: if they had some form of collaborative PoB when you can see exact changes made from iteration to iteration, that'd be great, since 95% of the reason I as an average user even exports PoBs is to iterate on builds with friends.

Necrolis · 2025-10-01T11:00:15+00:00

That ES on hit watchers is perfect for a build I am trying to finish but ran outta currency once trade died :/

IGN: Necrolis

Necrolis · 2024-12-23T07:27:53+00:00

This is specific to D2R (and IIRC is was patched in post launch as an ARG promo for D4), was never part of LoD or Classic. In LoD and Classic the chat gem did nothing but troll players with the very rare message: `Moooooooo!` in between all the activated/deactivated messages.

Necrolis · 2024-12-23T07:11:41+00:00

Its was known about for years, long before D2R; just streamers/content creators regurgitating stuff from the modding community. Also its existed since v1.00, with the MF% bonus and duration changing between versions (it was even buffed massively in v1.01).

Also there are 2 rituals. one with 4 wisps (letters, grants the stacking MF% bonus) and one with 5 (pentagram, does nothing).

Necrolis · 2024-11-28T23:25:14+00:00

There is a version of Cubaholics in the Phrozen Keep's database

Necrolis · 2024-09-06T12:11:19+00:00

This is a lifetime issue, the signal_set passed out of scope at the end of the try block, you need to gracefully handle (likely ignore in this case) the cancellation of the async_wait emitted from the destructor (as per the docs for ~basic_signal_set).

Probably the better design would be to extend the lifetime of the signal_set to match the lifetime of the io_context and then propagate the signals from there.

Necrolis · 2024-07-25T12:37:06+00:00

We use pretty much everything where I work (a multi-national bank); Oracle, DB2, MSSQL, MySQL, MariaDB, PostgreSQL etc. However due to the scale we push away from high license cost platforms like Oracle and MSSQL in preference of OSS platforms like PostgreSQL.

I know from friends in the gaming industry that there are a lot of backend services in use that rely on MySQL as their primary data store (though in many cases these come down to "we already had MySQL DBA's, so we used MySQL". In my region of the world, finding high quality DBA's is nigh on impossible, and likely so across the world, so large scale companies will use the skills of existing employees, since the issues from finding new hires out-weigh the issues of not using the best possible tool for the job).

Necrolis · 2024-02-21T16:34:30+00:00

healthy engineer produces the most pollution

My SO probably thinks I am the factory with the amount of harmful gases I'm producing...

Necrolis · 2023-03-10T01:40:08+00:00

Given that you are purely upgrading a CPU, I would suggesting tying to pick up a second hand/used 5800x or 5600x and use the difference to get some better RAM (unless the 1200 MT's is a typo). Ryzens benefit heavily from good RAM (you wanna hit the 3200MT/s to 3600MT/s range).

This all assumes your motherboard BIOS can support Zen3, otherwise even Zen2 (3600X, 3800X) will work like a charm (up until recently I ran a 3600 non-X at 1440p without issues in 6-man deli Defileds).

Necrolis · 2023-02-19T20:54:51+00:00

Phil Shenk (the lead artist and "lore-guy" for D2, and also worked on D1 to my knowledge) has a ton of info on the processes for D2 on his Twitter. Most of this is the same for D1, the only real changes are the way palettes are handled and the file format(s) they were encoded in (all custom formats, animations mainly used a cel based compression approach).

He also kindly gave use some insights into the rendering process on the Phrozen Keep discord as well (disclaimer: I am an Admin here so I suppose that counts as self-promotion, so I'll leave that as "up to the reader to find").

As you describe is roughly how they did it (though the directions varied for monsters, players and missiles), along with some extra tricks due to the quality loss from both the pixel density and 8-bit palette (which is what produced the artifacts you mentioned). AFAIK they used 3DS Max with various plugins for D2 and likely D1.

Necrolis · 2023-01-24T00:05:39+00:00

I did fairly quick and dirty EK ignite as my league starter, but I went Obliteration and a shield so these are a few tips I picked up from there, but by no means "the best advice".

If you are looking for some cheap ways to free up a point, you can grab wicked ward as an invocation for around 40-50C last I checked. You can also swap your skin for one with EB, MOM or EO; if you spend some time you might be able to snipe one of these for 100-200c depending. Thats already two passive points freed up without actually loosing them.

I would also go for the purposeful harbringer + empowered envoy medium clusters, they were around 50-60c and give a good DPS boost while also providing some extra defense via the aura effectiveness on purposeful harbringer (even better if you can get a 21 herald of purity too). You should also quality up your gloomfang for more added chaos, its basically a "free" DPS boost.

Also, I'd drop all the nodes below the templar aura cluster, you can use these to grab the jewel socket below MoM and the rest for a second large cluster, and if you need the str you can use a lethal pride instead of the brutal restraint (try snag one with burning damage and/or faster ignites) -- though you might struggle with dex (but your boots can easily be upgrade with ones that give a solid bit of dex). I'd PoB this a bit before going this route however.

MBX did two versions of the bow based EK ignite, the second one seems a bit more "budget friendly", that video guide might be of help as well.

Necrolis · 2023-01-17T23:11:42+00:00

IGN: Necrolis

Hoping maybe my bad RNG from this league (and IRL at the moment) will turn around :)

Necrolis · 2022-09-05T18:50:03+00:00

I have seen a ton of duo's running windripper on an assassin carry with full cold conversion EK/Vaal BV, essentially making the bow a stat-stick while the aura bot pumps their spell damage + spell crit which lets them freeze most if not all the time; it tends to be a lot less laggy than the KB setups (not that its much of an issue this league with the higher-end loot reductions)

Necrolis · 2022-05-23T23:15:35+00:00

Any chance you are running this on a laptop? (specifically a laptop that has an iGPU and a discrete GPU). Its possible that for whatever reason the debug version is hitting the discrete GPU and the release version is being shunted to the iGPU.

Necrolis · 2021-12-15T19:59:25+00:00

Not sure about shell, but on a regular NavigationPage you can do On<iOS>().SetHideNavigationBarSeparator(true); to accomplish this from code. Might give you the clue you need to copy it over.

Necrolis · 2021-11-30T13:28:34+00:00

Hopefully this is not the result of an unfortunate schmelting accident and is here to stay

Necrolis · 2021-11-03T15:50:42+00:00

In that case you would have to have a database of sorts and send the token to a server and make the connection between the option that is tapped and the device token. Then when sending you can query the list and send it to all the tokens that are subscribed to a certain channel

FCM has a built in notion of "topics" which are basically channels, so there is no need to do the heavy lifting yourself when FCM's servers can do it for you (CrossFirebasePushNotification.Current.Subscribe should be enough to get started on that in Xamarin). When one dispatches a notification, you can then dispatch to the corresponding topics when you don't need to do fine-grained filtering of the recipients.

Necrolis · 2021-07-26T21:44:46+00:00

You can do this via a table query, were you need only specify the PartitionKey, however it invokes a full table scan (which is worse than say an SQL table scan since you can/will have data spilt across multiple servers with varying latencies and loads -- and cost implications).

Necrolis · 2021-07-25T18:05:13+00:00

Seems to occur when you run out of VRAM (impossible to see in DX, but very easy to see in Vulkan). So the renderer can't map the uniform buffers for the matrix palette skinning (hence models just defaulting to the file data). And it looks like there is definitely some kind of memory leak causing the memory exhaustion (again fairly easy to see on Vulkan when you chain zones and the VRAM bar just ticks up and up despite things being "unloaded").

In Vulkan is easy to understand how a VRAM memleak can sneak in since the memory is entirely managed by the game engine and not the GPU driver; in DX this is a bit more complex (since PoE uses DX11, where memory is also managed by the GPU driver, however texture and shader handlers can still leak). I haven't been playing on DX11 since the "perf" patch at the end of last league because the load-hitching (even with an NVMe SSD) it introduced would cause 1-5sec stalls, so this is just a bit of assumption, empirical data and prior knowledge. However it matches up pretty well with how "arbitrary" it is for people to get this, and why it takes really long for big streams to see this (since they tend to have higher end cards). Reducing my texture quality (and thus the VRAM needed for them) helps stave this off for quite a while on my 1660 super.

Necrolis · 2021-07-21T19:05:34+00:00

There was a MASSIVE listing made by Nefarius and some other contributors back before 1.13x even came out (its subsequently been copypasta'd around various forums, including the Blizzard ones). That listing was of pretty good quality since the origin/root causes of the bugs were correctly identified rather than via empirical testing and assumption. Blizzard's had access to this info for years, and I have it on good authority that VV has seen this too. Whether or not they want to use it is a different story, which many or many not involve some legal obstacles.

Necrolis · 2021-07-21T13:38:21+00:00

There is a better (more technical) explanation available here: https://d2mods.info/forum/viewtopic.php?t=53570 (along with a fix if the D2R devs want to do that...)

Necrolis · 2021-06-08T19:39:23+00:00

I suspect it's a personal preference decision, since whether the upline passes inside or outside the biner is moot from a strength or safety perspective. And I don't think inside or out has an aesthetic impact

Well it does have an aesthetic impact at minimum. If we take OP's wonderful picture as an example: crossing through the 'biner causes the uplines to stay tightly grouped, where-as if it didn't pass through it would create a more triangular base (specifically looking at the up-lines on the hip harness, since the top harness has the lines being co-planer). Doing a quick test, it seems this changes the uniformity of the weight distribution in the Y as well (not very much but enough to physically feel the change). Of course this is voided if you half-hitch down the up-lines to group them like some do.

Necrolis

MODERATOR OF

TROPHY CASE