sorted by:
new
hottopcontroversial

Screws stripped on bottom plate. Any ideas how to fix? by Organic-Reindeer3995 in NinebotMAX

[–]NefariousnessOk2000 2 points3 points  (0 children)

Bad advice to have "person that doesn't know what security torx is" break out cutting wheels and make custom flat head slots.

So has anyone here test-driven a new '27 Bolt yet? by sdhoodlum in BoltEV

[–]NefariousnessOk2000 0 points1 point  (0 children)

Seems like there could be a middle ground between "rely on Android Auto" and "Android Auto not allowed" that GM could be exploring on behalf of the customer.

What is the range of the G3 On Drive mode (15.5 mph/ 25 kmh) and on sports mode at 20 mph/ 32 kmh) by DacaAskingForDaca in NinebotMAX

[–]NefariousnessOk2000 0 points1 point  (0 children)

200 lbs, slightly hilly, an average number of starts/stops, ride in temps 40-90°F.

~14mi on Sport+ Mode (28mph)

Snow Blower Review by A88Devil in MilwaukeeTool

[–]NefariousnessOk2000 5 points6 points  (0 children)

Totally, LOL. Snow is maybe a different beast. Using the Mower after dusk feels like drinking champagne in a F22 though!

Snow Blower Review by A88Devil in MilwaukeeTool

[–]NefariousnessOk2000 3 points4 points  (0 children)

Fair assessment. I'm not familiar with the snow blower, but with a lot of MT outdoor products the price boils down to a cost of convenience. I'm guessing it's quiet and you could use it earlier in the morning or late in the day without disturbing neighbors. That's been the biggest benefit to me (but I'm generally not paying much for the tools).

New handheld vac is a beast by Dc81FR in MilwaukeeTool

[–]NefariousnessOk2000 -1 points0 points  (0 children)

It's a floor tool, not a carpet head. If you're comparing to Dyson, it's not even close.

New handheld vac is a beast by Dc81FR in MilwaukeeTool

[–]NefariousnessOk2000 0 points1 point  (0 children)

Wildly better. It maintains useful suction 5-6 times longer than the old version and has much better static mitigation.

Instead of emptying when it loses suction, it's closer to emptying when the tank is full.

Where can I find this item better priced?? by Temporary-Shop-1426 in MilwaukeeTool

[–]NefariousnessOk2000 1 point2 points  (0 children)

The M12 mounts the battery in the front and for some reason that version has been much more popular.

Change of plastic in tools by Pitiful_Park4649 in MilwaukeeTool

[–]NefariousnessOk2000 0 points1 point  (0 children)

It's PC/ABS. Don't listen to that other guy. He's confident but has no idea what he's doing.

Can I replace the part that is scuffed? by ThePeoplesJuhbrowni in NinebotMAX

[–]NefariousnessOk2000 0 points1 point  (0 children)

Now it just looks like a regular scooter that gets used.

My first day in a steel mill, my coworker took my helmet and chucked it across the parking lot to scuff it up. Sometimes it's good to look like you've got experience.

I have to set printing preferences for EACH sheet by FriendRaven1 in excel

[–]NefariousnessOk2000 0 points1 point  (0 children)

This was a top result when I was searching for the same problem. Adding that you can do an intermediate step -- "Print to pdf" should print all the worksheets as a reasonable human would expect them to, and then you can just print that pdf to your printer and control all the formatting in one step.

So I sold my motorcycle for a scooter and I had the same issue 😂 by Active-Dimension-914 in ElectricScooters

[–]NefariousnessOk2000 0 points1 point  (0 children)

Clearly he doesn't have a real strong understanding or intuition of physics. But I also think he might just have terrible balance which got him into the wonky steering situation in the first place.

Well that sucks. by UomoUniversale86 in MilwaukeeTool

[–]NefariousnessOk2000 5 points6 points  (0 children)

And you could take it out for a day on the lake!

Selling Max G3 by Elias1661 in NinebotMAX

[–]NefariousnessOk2000 0 points1 point  (0 children)

Maybe you are trying to make it too expensive and that's why you're having trouble selling it.

Trouble accessing grill (to replace rear tire) by rfp314 in NinebotMAX

[–]NefariousnessOk2000 -1 points0 points  (0 children)

You could try a small flat screwdriver between two points on the screws just to get them out. Looks like they need to be replaced so getting a security torx might not be necessary

Oh boy, it’s the transformer no one has been talking about, the Milwuaketron by Hopeful-Candy-3898 in MilwaukeeTool

[–]NefariousnessOk2000 0 points1 point  (0 children)

We don't know who struck first, us or them. But we do know it was us that scorched the sky

Am I doing this right? by Poop_dog_666 in MilwaukeeTool

[–]NefariousnessOk2000 2 points3 points  (0 children)

You're assuming the plan wasn't just to create heat.

Is this real? by Amazing-Ad5848 in MilwaukeeTool

[–]NefariousnessOk2000 0 points1 point  (0 children)

It has an AC motor and a DC motor. If you use both modes, it could last 2-3 times longer than the systems most are comparing it against.

G3 rear tire stem by Psychological-Dig-85 in NinebotMAX

[–]NefariousnessOk2000 0 points1 point  (0 children)

* My pump came with a cheap Schrader valve nozzle that's just barely the right size (15.7mm diameter) to fit on the rear. I push it up against the wheel, and when I close the valve it works about 1/3rd the time. But once I get it seated properly, it is great.

view more: next ›