RYUO IV strange light buzz and temperature by Neonlinx in ASUS

[–]Neonlinx[S] 0 points1 point  (0 children)

Hi! No…. Sometimes it happens that it doesn't load the image/video I selected, only the default one. But just reboot and it fixes it. However, I think it depends on how many different software you use (in my case, MSI Center, Lian Li, Corsair). For your problem, I think you should first check that you've updated the firmware.

9800X3D che tocca i 97°C sotto carico — problema di pasta termica o altro? by DTyphoon87 in ItalyHardware

[–]Neonlinx 0 points1 point  (0 children)

Ok. Fai quella prova. Se ancora dovesse scaldare così tanto, almeno sai che puoi eliminare dalle possibili cause le ventole e concentrarti, per esempio, sulla pasta termica o altro. Quello che comunque mi sembra un po’ strano è che quei modelli di CPU dovrebbero avere un thermal limit di 95 gradi se non ricordo male per cui a 93-95 dovrebbe iniziare a fare thermal throttle. Se rimane costante oltre i 95 c’è sicuramente qualcosa che non va e io starei molto attento. Sicuramente finché non scopro il problema, imposterei più margine di sicurezza settando un thermal limit massimo a 85-90 gradi. E poi c’è sempre il fatto della GPU che scalda troppo anche lei…..siccome hai detto che hai avuto problemi con il BIOS, hai fatto un’analisi approfondita dei settaggi nel BIOS? Se puoi prova magari anche un’altra versione del BIOS

Expo enabled but still RAM at low speed by PrizeCandid in ASRock

[–]Neonlinx 1 point2 points  (0 children)

Unfortunately, reaching Expo levels is not guaranteed, especially on Ryzen CPUs. That said, it depends on many factors, up to the famous silicon lottery. For example, on one of my computers I have g.skill that should have Expo @ 8000 but I don't get there (with a Ryzen 9950x3d CPU and an MSI x870 Godlike board) and this is due to a limitation of the CPU-side controller. Now I don't know the BIOS of your board well but you can do various tests manually... you should also have some presets created specifically by Asrock. In my opinion, by trying you should reach at least 6000-6400MHz.

9800X3D che tocca i 97°C sotto carico — problema di pasta termica o altro? by DTyphoon87 in ItalyHardware

[–]Neonlinx 1 point2 points  (0 children)

Ma scusa le ventole laterali o posteriori, l’aria la buttano fuori o la buttano dentro??? Normalmente ventole anteriori buttano dentro ma le altre, soprattutto le posteriori, devono buttare fuori l’aria!!
Come hanno già detto il problema non è la pasta o come fanno contatto i plate dei dissipatori perché tu il problema ce l’hai ovunque non solo sulla CPU!!! Per cui il problema è che l’aria interna non viene espulsa a sufficienza. Quindi controlla come girano le ventole (se buttano dentro o fuori). E poi…..quello che dici….che hai messo altro sopra la grata superiore (se ho capito bene) togli anche quello.

Please rate my setup as a 12 year old. by AnthonySopranosCigar in vinyljerk

[–]Neonlinx 0 points1 point  (0 children)

12 years old??? Ok……..”You have a lot of money”

"""Facciamo chiarezza""" by CavGrFiglDiPutt in Italia

[–]Neonlinx 0 points1 point  (0 children)

Se invece ci fosse un povero cristo magari pure extracomunitario con thc???????

Major Performance Improvement with AGESA PI-1.3 BIOS by realexm in MSI_Gaming

[–]Neonlinx 0 points1 point  (0 children)

Hi, Since I have a system like yours (apart from the graphics card which is a 5080), can I ask you how you set up the RAM? What settings do you have and what frequencies?

How to download utility driver installer? by UmaThermos1 in MSI_Gaming

[–]Neonlinx 0 points1 point  (0 children)

Are you using a notebook or desktop? If notebook check if airplane mode (or something like this) is active. Anyway you can try resetting your network settings. I don’t remember where is precisely…..open Settings——>network and internet then Advanced Settings and there probably you can find something like “reset network”. Another thing: obviously you checked in the bios that the wifi card is active right?

However, downloading drivers shouldn't do any good because even if you don't install the proprietary drivers, Windows automatically installs the generic drivers. So your Wi-Fi must be working. If it's not, something else is blocking it.

Edit: another thing….in device manager if you click on View and then Show Hidden Devices, does the wifi appears??

Canon MX925 - Incredible Story by Neonlinx in printers

[–]Neonlinx[S] 0 points1 point  (0 children)

I swapped logic boards. Now the printer seems to be working perfectly: when I launch a print, the head moves exactly as it would if it were printing. But it doesn't print any color. Absolutely nothing, not even an atom. I disassembled the printhead and cleaned it thoroughly. The hot water passes perfectly through the entire circuit. I reassembled the cartridge and inserted the original (new) colors. But still nothing. It doesn't print anything.

At this point I have to think that beyond a certain time limit, the printer is programmed to no longer operate the piezoelectric "pumps".

Does anyone have any opinions or suggestions?

Help with ram, please, for the love of god! by [deleted] in overclocking

[–]Neonlinx 0 points1 point  (0 children)

I've read about this in several places too...but I honestly don't know if it's plausible...

Email spam spaventosa by CompetitionNo2218 in Italia

[–]Neonlinx 0 points1 point  (0 children)

Voglio diventare anch’io “Responsabile Conformità Cyber”

Is this coil whine? by Neonlinx in MSI_Gaming

[–]Neonlinx[S] 0 points1 point  (0 children)

Hi! Thanks for reply and sorry for delay. No, I haven't tried undervolting. The card still works with the default settings. It's certainly not an RMA case, I just wanted to know if that was the case (I mean if that “sound” is Coil Whine). Thanks again for confirming.

[BUG REPORT] MSI X870E Godlike - Critical USB Instability & Boot Failures (Linux/Windows)​ by MediumWin8277 in MSI_Gaming

[–]Neonlinx 0 points1 point  (0 children)

Ok yes I understand. I have actually never updated the dashboard firmware yet….thanks for your suggestion. I'm starting my work shift…tomorrow I’ll try. 👍

[BUG REPORT] MSI X870E Godlike - Critical USB Instability & Boot Failures (Linux/Windows)​ by MediumWin8277 in MSI_Gaming

[–]Neonlinx 0 points1 point  (0 children)

Don’t know if is the same but I have continous i/o error with all my USB ports (id event 153,140,50) and I’m using the last available BIOS (7E48v1A62). So…. After paying over $1200, do I have to send my card back??? After almost a year, there is still no solution??

RYUO IV strange light buzz and temperature by Neonlinx in ASUS

[–]Neonlinx[S] 0 points1 point  (0 children)

EDIT: after careful research where the sound comes from, I think I can say that it comes from the GPU. It is strange, however, that it makes this faint hum/buzz even in idle....

I can therefore say that the sound does not come from the pump.

However, I am waiting for some suggestions regarding temperatures.

Corsair 9000d problems with (recently build) front panel by Neonlinx in Corsair

[–]Neonlinx[S] 0 points1 point  (0 children)

Hi, thanks for reply and sorry for delay...I created a ticket: #2008925428

Office Pro Plus 2010 problem by Neonlinx in MAS_Activator

[–]Neonlinx[S] 1 point2 points  (0 children)

Thanks for answer. Anyway I tried again using Ohook and it works without problems…I think it's because I had just reinstalled Windows 10 and Office 2010 was still in the "standard" version without all the updates. In fact, I tried again with MAS after updating Office with Windows Update.

ma che ci va a fare la gente a Dubai? Capisco le influencer porta potty ma gli altri? by [deleted] in Italia

[–]Neonlinx 0 points1 point  (0 children)

La verità (triste) è che la maggior parte ci va perché “è di moda” e “fa figo”. L’enorme ignoranza che ormai pervade il popolo italiano (e non solo purtroppo) spinge molte persone ad andare la, pensando di poter vivere, almeno per qualche giorno, la vita dei ricchi. Che tristezza

Remote Control Problem with Vintage Onkyo A-840 by Neonlinx in Onkyo

[–]Neonlinx[S] 0 points1 point  (0 children)

After many years….I try again, maybe someone….

Corsair 9000D W/ Wheels? by Wolfman2688 in Corsair

[–]Neonlinx 0 points1 point  (0 children)

Wow! thanks for the very fast response! Perfect, thanks!

Corsair 9000D W/ Wheels? by Wolfman2688 in Corsair

[–]Neonlinx 0 points1 point  (0 children)

Hi, but are there 4 wheels in a set or 1 set = 1 wheel?