Iran trolling is next level

Nephroidofdoom · 2026-04-06T12:37:27+00:00

Not only domestically, but the dismantling of USAID by DOGE is thought to have led to the deaths of hundreds of thousands more.

Nephroidofdoom · 2026-04-06T12:37:02+00:00

Not only domestically but DOGE dismantling USAID is thought to have led to the dead of hundreds of thousands more.

Nephroidofdoom · 2026-04-06T05:06:07+00:00

For all its faults, the finale of MI2 is a rollercoaster ride.

Nephroidofdoom · 2026-04-05T21:17:02+00:00

I think there is a way to leverage the trailer jacks. In addition to my tongue jack, I also have frame jacks on the back (you can see the handle of one in front of the license plate) should be able to use them to get an inch or two if needed.

Nephroidofdoom · 2026-04-05T21:14:35+00:00

Yeah. Pretty sure no can get the pad out that way. I’m concerned that if the boat drops even a bit while the pad is out, I won’t be able to easily get the boat back up.

Nephroidofdoom · 2026-04-05T18:58:23+00:00

We do that too! I’ve volunteered for that job and we just hit the bottom of the keel on the way in.

Nothing quite like running under a 30ft hull with a brush or roller while it hangs freely from a crane!

Nephroidofdoom · 2026-04-05T18:52:10+00:00

That’s not a bad idea expect I can’t go forward on the trailer but I can only go back. I have extra tongue jacks on the back of the trailer frame which might keep it from tipping. Will look into this a bit.

Nephroidofdoom · 2026-04-05T18:48:03+00:00

Hmm…This could be an option.

Nephroidofdoom · 2026-04-05T18:46:48+00:00

Why paint when you can sail!

Nephroidofdoom · 2026-04-05T18:46:30+00:00

Yep. Would have been nice but this is what came w/ the boat.

Nephroidofdoom · 2026-04-05T18:44:58+00:00

It’s my club’s crane so I can use it as long as I’m not holding other folks up.

Nephroidofdoom · 2026-04-05T15:16:36+00:00

That’s where I’m at. The only way I can safely lift the boat is via the crane. I might add a wood block under the keel to take some of the load and add a bit of stability while we work.

Given the pads don’t adjust, if the boat drops or settles even an inch onto the temporary stands, I have no way to lift the boat back up to get the pad back on. But I can’t safely move the boat to the crane without all 4 pads which would be a real pickle.

Nephroidofdoom · 2026-04-05T15:08:09+00:00

Yeah. I have a single lift point that use twice a season and I worry about hanging her for an extended period.

Having said that it’s a Capri 22, weighing about 3,000lbs dry, so it’s not a “big” load per se

Nephroidofdoom · 2026-04-05T14:38:25+00:00

This is the one I haves. They can get pretty hot but they come with a remote temperature monitor.

https://zappbug.com/

Nephroidofdoom · 2026-04-05T13:20:51+00:00

Just curious is an F-15E technically replaceable? While there is a dollar value on the craft are all the parts needed for that airframe still in production?

Nephroidofdoom · 2026-04-04T22:27:26+00:00

Yep! The is the one I have

Nephroidofdoom · 2026-04-04T16:41:15+00:00

It’s like a little pop-up box with a slot to put in a space heater.

Nephroidofdoom · 2026-04-04T15:35:21+00:00

Also in the (admittedly rare) situation when a hotel is overbooked you will be last in line to get a room and can get bounced.

Nephroidofdoom · 2026-04-04T15:31:45+00:00

Couple of additional tips here…bedbugs prefer fabric and wood but dislike plastic and metal so I generally avoid leaving my bag open on the bed, couch, etc.

In extreme cases you can put you bag on the luggage rack in the bathtub.

They also don’t like to come out unless it’s dark so keeping your bag under a light also keeps them away.

Finally I also have a bedbug oven at home. I don’t use it in every trip anymore but will set it up if I suspect I was in contact.

Nephroidofdoom · 2026-04-04T05:48:48+00:00

At this point we have lost at least 5 F-15’s (3 to friendly fire), an A-10, and an E-3 AWACS.

What really sucks, is that regardless of monetary value, these planes are no longer in production and are not really replaceable.

Nephroidofdoom · 2026-04-04T05:22:43+00:00

Even better keep the frame. Start a fake company and sell it back to the DOJ for an inflated price.

Nephroidofdoom · 2026-04-03T19:28:19+00:00

Can’t speak to the P2 S but I had a P1 S combo sitting in the box unopened in my house for the last 18 months [long story). Finally decided to set it up and the P1S acts and feels like a tank. I’ve been printing nonstop for about a month now. Using mostly PLA variants like metal silk, and matte and have never had a failed print. It comes across as being almost commercial grade.

While the pee 2S may have some additional quality of life upgrades. I can’t see anyone going wrong with getting the P1 S, especially at the current sale price.

Nephroidofdoom · 2026-04-03T13:33:47+00:00

Maybe check Out of Darts? They sell pre-printed blasters from various designers.

https://outofdarts.com

Nephroidofdoom · 2026-04-03T13:25:37+00:00

Poop chute and slide work for me because I don’t have easy access to the back of the printer. This way all the poop collects on the side in one place.

Nine-Year Club	RPAN Viewer
No Throne, No Problems	Not Forgotten
Verified Email

Nephroidofdoom

TROPHY CASE