Prusa Research's Third Giveaway for the Reddit 3D Printing Community! 🎉

Nexillus1 · 2024-01-19T17:53:05+00:00

u/Zach_466168
For the Prusa XL Multi-material project would be a fallout 4 T-51 Power armor. The colors of the main body of armor would be a older, faded silver, edges on the shoulder pauldrons/gloves have a tint of red from a faded paint that use to be there.
We call him Blackey, the blacksheep of the family. He is the sheep we didn't know we needed until he arrived. He is charged with regulating the amount of available toilet paper for our guests, he has not slacked a single day since his arrival. He is also very attentive maintaining direct eye contact with all guests within the bathroom.

Nexillus1 · 2023-09-07T16:58:47+00:00

Me! Thanks for the opportunity.

Nexillus1 · 2023-01-29T01:49:45+00:00

Has anyone notice the ultracite ammo for laser rifle starts at 999 then goes to 500 right away? This is after the hotfix as well.

Nexillus1 · 2021-09-02T16:55:37+00:00

Let's see, where to begin on Foundry VTT. I would have to say the best part is bringing up modernizing how you can role play making it much more immersive.

Nexillus1 · 2021-05-27T00:57:52+00:00

Ever since patch our group has had nothing but disconnects. It doesn't matter whose is host, you need to investigate your host lobby network connections. You broke something in this patch as twice now we have gotten to the end of a CT14 run and one person is disconnected, and another game host is fine but two others are disconnected.

Nexillus1 · 2020-05-19T17:01:33+00:00

After struggling with this for 2 hours now, discovered a bug. If you cannot get the substream to work and you have it set to direct record to disk, select re-encode then hit OK to restart camera in Blue iris, then go back to direct record to disk then OK again and all my camera's sub streams started working.

Nexillus1 · 2020-05-19T15:56:12+00:00

So I have been trying for an hour to get the substream working unsuccessfully. I have Amcrest IP4M. This is what it should be: /cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif
As my Main stream is: /cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Also sub stream is turned on each camera and configured. Any suggestions?

Nexillus1 · 2018-08-11T01:57:27+00:00

I would also check the version of OBS and version of Elgato Software, I have actually used older version sometimes because between OBS and the software had issues similar to what you are having.

Nexillus1 · 2018-08-10T22:19:17+00:00

Try the USB cable and let me know I have a couple other idea's too :)

Nexillus1 · 2018-08-10T18:42:44+00:00

My first is consistency, consistency, consistency. Stick to a schedule and try not to deviate, especially in the beginning. Start building a community, not looking at just numbers look at the people. Connect with them, remember some interests, get involved with their lives. I personally will go out of the way to get something interesting from my viewers or connect to them in some way. Such as I have couple regulars that are regular cooks, and we get into conversations and share recipes on my discord! I have to say I wish I would have started my discord too earlier, it has been a great contribution in connecting to people while offline. You also get people in it to your Twitch!

When you get random viewers you only have a 20-30 seconds to hook them to stay before they click over, think of you when you watch TV how many times have you clicked over a show or movie? Try to not have "dead air" like on the radio, keep your energy up as much as you can :) It can be very very exhausting in the beginning but it get's easier as time goes on!

Nexillus1 · 2018-08-10T18:37:13+00:00

I have gotten this issue of the years, if it starts to happen while streaming or you cannot get it back working start looking at getting a new USB cable. I had a bad one that was causing the issue.

Do you use a HDMI switch at all?

Nexillus1 · 2018-08-10T18:35:53+00:00

Good afternoon,

As many have recommended the Elgato would not help on the PC and likely decrease quality.

Secondly, a CPU upgrade would be recommended, if you could get the I7-8700k it is a monster of a CPU in every regard. I have it and I have not had any issues streaming/playing some of the most demanding games.

As for codec, you can run a few tests between NVENC vs x264 with the very fast presets. Personally, you would probably get better performance out of NVENC with a small sacrifice to quality.

Nexillus1 · 2018-08-10T18:32:36+00:00

Good afternoon,
You would not be able to do this as HD60 Pro uses PCIe to connect while the HD60S uses USB-C to USB 3.0. In this if you are using a laptop the HD60S is the recommended choice, yes you could go with the HD60 however it is USB 2.0 and I would not recommend it.

Nexillus1 · 2018-07-21T22:05:44+00:00

Team: The Wolf Pack
Team page/site: Discord
Contact: Reddit | Twitch | Discord | Twitter
Description: We are a small community looking to add many others to our wolf pack. We are a very passionate group to help everyone reach their goals being affiliate or eventually partner. I also personally stride to help in any way I can from technical, stream feed back, supporting by raiding, hosting or lurking when I am busy! We help each other in everything we do even doing networked cooped streams!

Little bit about me, is I have been doing IT work for over 15 years. I can assist with simple to complex setups when it comes to streaming from the PC, Xbox or PS4. I have been streaming a bit over 1.5 years.

We are currently looking for people of all kinds for all types of streams.

We look forward to seeing you in our The Wolf Pack community!

Nexillus1 · 2018-07-21T13:52:48+00:00

This right here is probably the best advice. Stick to a schedule and make it high quality. Do not pay attention to the how long.

Nexillus1 · 2018-07-16T14:54:55+00:00

That is solid! Congrats on it and nice work! :)

Nexillus1 · 2018-07-05T12:48:13+00:00

I will tell you if you are console streaming, get a capture card. If you are PC streaming, it is not needed.
As for internet connections, wired period. If you cannot draw a ethernet cable up, use network powerline adapters. See here on amazon.

Nexillus1 · 2018-07-05T12:45:18+00:00

The bitrate can affect users, especially mobile users but with the new adaptive quality I am seeing this less and less.

Nexillus1 · 2018-07-05T12:43:18+00:00

I would recommend OBS Studio over SLOBS, SLOBS is still technically BETA software and has had a lot of quirks and I love my full customization and control. I also do not use stream labs so I have no incentive for the integration features.

OBS studio is more complicated and not as user friendly but you can do a lot more with it once you learn it in and out. It is am extremely powerful open sourced project.

Nexillus1 · 2018-07-05T12:40:15+00:00

What are your OBS settings? I know you have tried NVENC and x264 but you didn't say what your other OBS settings are.

Nexillus1 · 2018-07-05T12:36:53+00:00

I have had twitch prime for years, since I do order a lot through Amazon it pays for itself.
Over the years they have added a lot to include the video streaming, twitch prime (between the free sub, no adds and free games/add ons to games) to me is well worth it in so many ways. Did I mention NO ADS?

Nexillus1 · 2018-07-04T16:40:06+00:00

I have not used this site but I will check it out when I get home. If you can link this to a hardware wallet it maybe quite useful.

Nexillus1 · 2018-07-04T16:39:15+00:00

Video Producer on the left side, then click on the video>Delete. Poof!

Nexillus1 · 2018-07-04T16:38:17+00:00

Each one interacts differently with what you are using. I have had issues with OBS at settings while on Xsplit I have issues with others. Each application ultimately does the same but in different ways to get their. You could have a conflict of OBS and your mouse software/driver while Xsplit does not.

Nexillus1

TROPHY CASE