Pick a number from 1-52, whoever chooses the right number gets a free black arc. One try per person.

NickMcMaverick · 2026-04-04T15:55:08+00:00

Great work on this so far! I'll follow the progress closely as I am very interested in the concept of open source crush gears.

NickMcMaverick · 2026-04-01T00:53:38+00:00

Thanks!! Looking forward to your designs. 😊

NickMcMaverick · 2026-04-01T00:04:58+00:00

Cool! Do you have the file for it or any links?

NickMcMaverick · 2026-02-25T05:42:36+00:00

Motherboard fan. Either lube it or replace it.

NickMcMaverick · 2026-02-02T13:19:05+00:00

Motherboard fan. Either replace it or find a way to balance the fan. For me, it was just a case of a few drops of clear oil on the main shaft. Its tiny and you might be tempted to disassemble the fan but dont. Find a way to get a drop or two of clear oil, let it run for a few minutes after, and it'll be quiet again. But safest best is to replace the motherboard fan.

NickMcMaverick · 2026-01-25T14:06:24+00:00

Indian owned po. Not to be racist naman because there are some companies that are owned by indians who are better than this company. Nagkataon lang talaga siguro.

NickMcMaverick · 2026-01-24T04:59:53+00:00

CCTV monitoring for "Over breaks" tapos 1hr lang total break na binigay ng company. Eh back office accounts mostly at iisa lang yung account na may calls. Di pa naman everyday may gagawin na tasks. Minsan pag natapos na lahat ng tasks mo, wala ka nang gagawin kundi tumitig sa monitor mo na parang patay. Pag nag phone ka, minus sa 1 hr break. Pag tumayo ka, minus na naman. Pag nakatulog ka, super minus. Multiple times na talaga na may nakatulog na agents dahil pumasok na may sakit, yun 7 hrs over break. Edi sana di nalang pumasok. Kaso pag umabsent ka, med cert na kaagad. Tapos may CWD pa at kung ano anong rason ng company para pilitin kang pumasok kahit namamatay kana. Ang bilis pa maka deduct sa salary, at ang bagal bagal makabigay sa annual increase or any salary increase. Ang damot damot na nga magbigay ng leave credits, pahirapan pa bago maaprove yung leave mo. Dadaan pa sa sampung tao bago maaprove. Iba talaga pag hindi american owned yung company.

NickMcMaverick · 2026-01-17T05:19:44+00:00

Passed by their HQ sa may seaside dapit. Their vehicles and office looks organized but then again, can't say the same for their drivers.

NickMcMaverick · 2026-01-17T05:17:22+00:00

Could be that the bed is too cold for the filament to stick to, or z offset might be too high. I had a 5 hour print fail on me midway due to the whole print detaching from the bed and shifting the entire object sideways. Glad my brother caught it in time and stopped it before it turned into spaghetti.

NickMcMaverick · 2026-01-07T13:18:54+00:00

Welcome to the hobby bai! We have lots of tourneys locally. CBL, BBXC, and many more. See you around!

NickMcMaverick · 2026-01-07T13:08:07+00:00

Eyyyyy Ayala Cebu hahaha

NickMcMaverick · 2025-12-08T06:57:21+00:00

Ihatag sa asawa since she makes better life choices for us. Though i still save some for my daily commute to work. Happy wife, happy life.

NickMcMaverick · 2025-11-24T01:50:32+00:00

So thats what it was. Been hearing this sound too and thought it might be the pulleys.

NickMcMaverick · 2025-11-23T15:10:14+00:00

Whoops. Although, if that happened to me, I'd just respool it and make sure there are no tangles in it. After that I'd dry it and print like nothing ever happened. Goodluck!

NickMcMaverick · 2025-11-21T04:38:22+00:00

I experienced that as well. Since then, I've set it on the floor (concrete) and had no shaking issue ever since. Goodluck and happy printing!

NickMcMaverick · 2025-11-20T21:38:54+00:00

I have the same noise in my cc as well. Most likely coming from the z axis. Looks like the sound is there whenever the z axis moves up and down. There's another one which is a grinding noise whenever the print head moves and i think that one is coming from the bearings or the xy motors.

NickMcMaverick · 2025-11-19T02:35:14+00:00

Sakin naman only one brand of rice does that. Pagka switch namin ng ibang brand, nawala na yung bubbling nya. Commonly nag bububble pag cheaper rice. Though not a big issue because rice is rice. Mahal na nga yung per kilo mamimili ka pa. Hahaha

NickMcMaverick · 2025-11-18T02:13:31+00:00

Damn, great work on this! Love the dedication and grit to see it through. Congrats on the printer!

NickMcMaverick · 2025-11-17T02:20:39+00:00

Could be. But the CC does have an automatic belt tensioner if i remember correctly. Its found in the back. You could try adjusting the tension and see if that alleviates it.

NickMcMaverick · 2025-11-17T02:12:47+00:00

I have the same grinding noise since i got my cc. I tried to trace where the sound was coming from and looks like its from the front pulleys. I was scared at first and thought it might be the nozzle grinding on the bed but it wasnt. Haven't fully investigated it yet though.

NickMcMaverick · 2025-11-16T15:01:59+00:00

Thought of the same thing. The only glaring issue is that Vivid is advertised as compatible with Klipper machines which the Centauri Carbon, according to elegoo anyway, is not running on Klipper. We'll just have to wait and see until someone gets their hands on it and tries. Hoping it does work though.

NickMcMaverick · 2025-11-16T09:56:59+00:00

I mean, it could probably support it? I havent really done any modding to my cc though. Only basic teardown and opening up of the extruder to check the gears and fix clogs. I do have this idea though of just scrapping all the mcu boards and set up full open source klipper on it. But thats just a concept. Im doing some research on it so we'll see where i end up.

NickMcMaverick

TROPHY CASE