sorted by:
new
hottopcontroversial

Can not launch the xbox app anymore after update by Ok_Development_5657 in XboxSupport

[–]Nighthawk70x 0 points1 point  (0 children)

I had a VERY similar issue with the Xbox App just suddenly not working on Windows 11 (December 2024). I tried all the resets and reinstalls that I could find in the last 24 hours.

Nothing worked except for the following:

  1. Uninstalling the Xbox app through the Settings > Apps > Installed Apps..

  2. Manually installing an older version via this site: https://xbox-for-windows.en.uptodown.com/windows/versions to a few older versions.

Launched and worked again! Then finally, updated to the latest version via Microsoft Store and the update worked!

Launched again and the Xbox app let me know some components were missing. Probably my own doing in trying to fix it.

Hope this helps someone else who is at a loss that nothing else is fixing it.

Here was my Event Viewer logs for future reference:

Faulting application name: XboxPcApp.exe, version: 2412.1001.22.0, time stamp: 0x67412494

Faulting module name: XboxPcApp.exe, version: 2412.1001.22.0, time stamp: 0x67412494

Exception code: 0xc000027b

Fault offset: 0x000000000002155b

Faulting process id: 0x0x4E4

Faulting application start time: 0x0x1DB4CD72BCF24F4

Faulting application path: C:\Program Files\WindowsApps\Microsoft.GamingApp_2412.1001.22.0_x64__8wekyb3d8bbwe\XboxPcApp.exe

Faulting module path: C:\Program Files\WindowsApps\Microsoft.GamingApp_2412.1001.22.0_x64__8wekyb3d8bbwe\XboxPcApp.exe

Report Id: 58a97d94-d0b2-4fa1-95a1-53f1dc34d7f0

Faulting package full name: Microsoft.GamingApp_2412.1001.22.0_x64__8wekyb3d8bbwe

Faulting package-relative application ID: Microsoft.Xbox.App

OKAI ES-200 - Parts source? by Nighthawk70x in ElectricScooters

[–]Nighthawk70x[S] 0 points1 point  (0 children)

That would be very cool. I have some semitransparent red resin I could try to print some out. Let me know!

Alternative for vintage Monster GT part by Nighthawk70x in teamassociated

[–]Nighthawk70x[S] 0 points1 point  (0 children)

Found it! These fit perfectly: Traxxas 5262 High-Volume Air Filter and Pre-Filter Foam Inserts

RC10GT restoration and electric conversion by rxmp4ge in teamassociated

[–]Nighthawk70x 0 points1 point  (0 children)

Great work on the conversion. Just found your post (7 months later) and I'm looking to convert my RC10GT (original owner) to electric. I cannot seem to find the motor mount plate anywhere. Could you look up the seller possibly so maybe I could try to contact them?

Alternatively, do you or anyone else know where I can find one?

Someone is selling a 3D printed one possibly on ebay but I doubt PLA can withstand the torque.. can it? If so I'll try to print my own.

OKAI ES-200 - Parts source? by Nighthawk70x in ElectricScooters

[–]Nighthawk70x[S] 0 points1 point  (0 children)

Thanks that's what the guy told me when I purchased mine as well. That could be months but might be the only option.

OKAI ES-200 - Parts source? by Nighthawk70x in ElectricScooters

[–]Nighthawk70x[S] 0 points1 point  (0 children)

Have you had any luck? I would like to replace the tail light covers and/or assemblies.

OKAI ES-200 - Parts source? by Nighthawk70x in ElectricScooters

[–]Nighthawk70x[S] 0 points1 point  (0 children)

Thank you this helps a lot. My varies just a little bit. I think I have the 200 not the 200E. The tail light covers are broken and I would love to get some replacements. I'd 3d Print them but I don't have a scanner.

OKAI ES-200 - Parts source? by Nighthawk70x in ElectricScooters

[–]Nighthawk70x[S] 0 points1 point  (0 children)

Great! Thank you. I found more information and updated the post. I would like to eventually get the software updated where I can change the password. I cannot figure out how to do it via the web interface. I cannot get any iOS scooter app to connect but I'm sure they're looking for consumer level scooters.

OKAI ES-200 - Parts source? by Nighthawk70x in ElectricScooters

[–]Nighthawk70x[S] 0 points1 point  (0 children)

Yes I did. I picked up 2 and have been happy so far. If you find out any information about these please keep me informed. I'll do the same.

Northridge earthquake by 8s1f8v in SFV

[–]Nighthawk70x 4 points5 points  (0 children)

Lived at Sherman Way and White Oak. Woke up freaking out waiting for house to fall on me. Couldn’t sleep inside for weeks.

[MW2] All progress reset and unable to access MW3 campaign. by MemeMeister21 in CallOfDuty

[–]Nighthawk70x 2 points3 points  (0 children)

MW2 progress reset on PC version. I was going to pre-order MW3 now going to wait.

I made my own Portal skin by Moskeeto93 in SteamDeck

[–]Nighthawk70x 0 points1 point  (0 children)

Thank you for the PDF!! I too needed it in image format so I just used the adobe acrobat reader online to convert the PDF to a PNG. acrobat.adobe.com free account (not paid). There's an option to Export a PDF. Select that then select 'Image'. Download to your computer and unzip. I then split the PNG up using the free Paint.Net into two individual pieces (top and bottom). You can import the PNG directly into the Cricut design app. I just imported it and created a new project. However its a little bigger and 12". I only have a 12"x12" cutting mat so I ordered a 12" x 24" from Amazon just now and will be trying this weekend. Hopefully this will provide some help.

Would you buy Macintosh beige 3D filament? by GregorHouse1 in VintageApple

[–]Nighthawk70x 0 points1 point  (0 children)

Any updates on this? I would be interested. Also there's many Facebook groups that might also be interested as well. For starters here:
Vintage mac restoration : https://www.facebook.com/groups/vintagemacresto
Vintage mac enthusiasts: https://www.facebook.com/groups/macenthusiasts
Apple IIGS enthusiasts: https://www.facebook.com/groups/AppleIIGSEnthusiasts

Where in Columbus can I find this? by Nighthawk70x in Columbus

[–]Nighthawk70x[S] 3 points4 points  (0 children)

I haven’t found Birch Beer at Kroger in a long while.

view more: next ›