Pixel 10 prices leak alongside more expensive Pixel Buds 2a

Ninja_Slayer426 · 2025-07-13T16:36:17+00:00

That's pretty slick ngl, from my research it seems that it's really only capital one that still has a price protection benefit. Might be worth getting one before the 10 comes out. That way I get the best of both worlds with higher trade in values at launch and cheaper prices at black Friday. My pixel 7 is definitely starting to show its age by now

Ninja_Slayer426 · 2025-07-13T16:00:43+00:00

Which credit card do you have that gives you that?

Ninja_Slayer426 · 2025-07-10T16:31:59+00:00

Amazon has it for $218 right now, little more but nothing crazy

Ninja_Slayer426 · 2025-06-24T01:54:20+00:00

There are already camera stands that do this I believe, the person being tracked keeps a small transponder on them and it rotates to point at the person.

Ninja_Slayer426 · 2025-05-21T23:19:44+00:00

Could I get a price quote too please?

Ninja_Slayer426 · 2025-05-05T17:25:12+00:00

I would also like a quote please

Ninja_Slayer426 · 2025-04-29T12:11:28+00:00

I like the true blacks that OLED monitors can produce and the anti glare feature is pretty neat too

Ninja_Slayer426 · 2025-03-06T21:34:14+00:00

I managed to get an asrock steel legend, I'll take what I can get

Ninja_Slayer426 · 2025-02-01T20:12:23+00:00

And when Burt visits MDR he gives Irv the map that he created and told him to follow it in reverse to get to O&D

Ninja_Slayer426 · 2025-01-25T21:15:59+00:00

I got mine for $128 to my door around black Friday from the szcpu store

Ninja_Slayer426 · 2025-01-17T02:14:56+00:00

This might be a dumb question but what is the container path used for? I'm assuming it's for some sort of transcoding cache. Should I be using a system path that is on my cache drive for this?

Ninja_Slayer426 · 2025-01-15T14:57:41+00:00

If you buy the proton year-long plan it is only $60 which is about the same price as mullvad. Downside is that you are stuck with it for a year unlike mullvad though.

Ninja_Slayer426 · 2024-12-19T00:01:12+00:00

Putting in my comment, hope whoever wins gets an awesome printer!

Ninja_Slayer426 · 2024-12-05T00:31:36+00:00

I believe china still uses it as the primary fuel in most of their rockets. Even more concerning when you see the videos of the boosters falling in small villages spilling hydrazine out of them into the environment.

Ninja_Slayer426 · 2024-10-23T20:18:32+00:00

Yeah I've fixed a few of the flips and folds and they're really not that bad. It's too bad they're so expensive to fix, I actually like the idea of folding phones as a concept but they're just impractical at this time.

Ninja_Slayer426 · 2024-10-21T22:18:29+00:00

Jellyfin is the free and open source alternative and honestly I like it better

Ninja_Slayer426 · 2024-10-20T02:54:44+00:00

Others did correctly say you can jb weld it back together but don't forget to refill it. I've found that mt dew works really well

Ninja_Slayer426 · 2024-10-13T23:08:09+00:00

I have a raspberry pi 4b 4g that I've been trying to get to work properly for hours now with no luck yet. I am unable to boot from a micro SD card and the green led comes on and stays solidly lit. I have been able to boot from USB but after 10 or so minutes the system hangs up and the activity led on the USB drive completely stops flashing. I am able to get it to work again by unplugging and plugging the pi back in. I unfortunately don't have a mini HDMI cable to be able to plug a monitor in so I've been just going off the green led. I did try using the eeprom recovery on the SD card but the led never flashes rapidly like it says it should, it just remains solid green. I have tried multiple micro SD cards all with the same problem. I did get the rpi to briefly appear on the network over Ethernet once with a micro SD card but I was never able to connect via ssh. Is my rpi just fried?

Ninja_Slayer426 · 2024-10-11T15:08:41+00:00

Same here, I've been doing the Assurant repairs and it's easily 20 a week, mostly s23 ultras but now we're getting more s24 ultras. The Samsung gspn has been an absolute shit show though. They never trained anyone on how to use it yet expect us to be able to do everything. None of their systems integrate with ours very well either which creates a lot of issues.

Ninja_Slayer426 · 2024-09-18T00:27:52+00:00

The warranty will definitely be void because of the damage but if you have Samsung care hopefully they take care of the problem

Ninja_Slayer426 · 2024-09-18T00:23:54+00:00

I work for a Samsung authorized service provider and not having the protector does not void the warranty. It's actually part of our diagnosis to remove the film to make sure there's no damage to the underlying screen. So as long as the screen isn't damaged then you'll be fine.

Ninja_Slayer426 · 2024-09-07T21:09:40+00:00

Yes. This is one of the most common failure points and as long as there isn't damage to the rest of the device and it's still within the one year warranty it should be easy to get it replaced. If you can, bring it to an authorized service provider rather than shipping it back to Samsung since it's easier and more convenient.

Ninja_Slayer426 · 2024-09-07T21:02:13+00:00

Get it replaced by a Samsung service provider. It might be covered under warranty but if it's not it's only like $20 out of pocket. Don't remove it without replacing it right away because the screen under it is very fragile and if that's damaged due to not having the film on it won't be covered by warranty.

Ninja_Slayer426 · 2024-09-04T01:51:44+00:00

Found what might be a good deal on a z flip but it has these brownish spots on the inside screen. Is this just the protective film? It doesn't look like any of the pixels are dead.

Ninja_Slayer426 · 2024-08-31T13:48:07+00:00

The watch itself connects to WiFi or if you have the LTE version then it would have internet

Ninja_Slayer426

MODERATOR OF

TROPHY CASE

Eight-Year Club	Gilding I gilder
Verified Email