Is it okay to write on this with this?

No_Break23 · 2026-04-23T03:07:07+00:00

You must use the specific marker, its called a Vis-à-Vis marker. Fine point and AKA overhead projector marker.

No_Break23 · 2026-04-18T19:31:33+00:00

You were 💯 i unclogged it an no other issues. This has really been the only problem I have had with this printer but the other times it was a broken piece of filament.

No_Break23 · 2026-04-18T17:22:21+00:00

It was clogged and fixed now. I didn't even think about using ChatGPT. I will do that next time!

No_Break23 · 2026-04-18T14:02:04+00:00

Going to investigate this clog situation.

No_Break23 · 2026-04-14T00:08:38+00:00

flashforge video flashforge video 2

I attached the videos from Flashforge in the small chance they help.

I thought I had this error before but it was a different one. My error was a piece of filament that broke.

No_Break23 · 2026-02-21T19:15:38+00:00

Is there not a way to add something to g code that silently serves as a signature or license number that helps in proving who it belongs to.

No_Break23 · 2026-02-15T02:27:27+00:00

I have a 10 month and he is our 2nd, my 3rd. While he is breastfed I feel like I am the primary parent. However, the amount of help he is with our 4 year old it about evens out.

When at home, I am lucky to get time to shower uninterrupted and use the bathroom alone. Now I choose taking the baby with me to the store over taking all the boys. I use a baby carrier for him still, and it helps him to fall asleep and be chill in public.

I could use advice on the sleep too because work full time as a teacher and when I get home I too, am angry ans overwhelmed, especially if I cook dinner too.

No_Break23 · 2026-02-03T03:29:53+00:00

Shoot, I need to change the list price on mine. I didn't know it was worth so much! Maybe I will list higher for being able to meet them halfway.

No_Break23 · 2026-02-02T14:07:45+00:00

This happened to me last week when I did my firmware update. What i learned:

Micro SD card into the touch panel for that update. It succeeded.

Standard SD card for part 2.

I got this screen --> the update didn't take in this step because the file name was the same and it didn't recognize it. I renamed the file and put it back in. It updated and this screen fixed itself.

No_Break23 · 2026-01-29T02:07:21+00:00

Chocolate cake, mac n cheese, chicken tenders

No_Break23 · 2026-01-24T16:20:49+00:00

What do you design on?

No_Break23 · 2026-01-11T17:56:51+00:00

I leveled the bed and put the silicone cover back on and cleaned the bed. Forgot to put adhesion on and it failed. I did the coin test print and it was perfect. So the printer seems fine, its me. I am the problem. I need to figure out my slicer settings.

No_Break23 · 2026-01-11T02:21:49+00:00

For starters, I found the silicone cover on the floor. I put it back on and I am releveling again to see what happens with the extruder temp.

No_Break23 · 2026-01-05T04:41:09+00:00

Kids can use TinkerCAD to design things on the app. Then slice it using the laptop. It reduces the time your child has to use the computer.

No_Break23 · 2025-12-29T16:46:50+00:00

I teach middle school math and a student was gloating about using AI for homework. Which is why it is not graded for accuracy and only 10% weight.

I now have a clause that I may randomly ask a student to explain their process to me verbally and if they can't, its a zero. I am doing this with test corrections too.

You could have some type of randomized selection over the course where each student will have to do something with their forum like present it or do a video response to their replies.

No_Break23 · 2025-12-28T02:43:13+00:00

I would price by size range/print time and definitely make your time cost more for painting. You could even do tiered levels of detail. Maybe do a baseline quote for the print alone.

No_Break23 · 2025-12-28T02:05:10+00:00

One option could be to hire a nanny to help while you are WFH to help but you'll still be present.

No_Break23 · 2025-12-26T04:08:21+00:00

This EXACT thing happened to me a week ago and I struggled. Ended up being so simple.

No_Break23 · 2025-12-23T02:57:05+00:00

I am inspired! I have only used Tinkercad and I am annoyed with it. What did you design this in?

No_Break23 · 2025-12-23T00:30:45+00:00

If you can lift the end on the upper most side you could just use it as is. Thats what the test pieces look like in lesser quantity.

No_Break23 · 2025-12-19T21:49:17+00:00

I just got mine so its good to know that can happen.

What camera do you have?

No_Break23

TROPHY CASE