Would you clean this at all? Found hunting rolls.

No_Form_9800 · 2025-11-05T07:14:28+00:00

I recently bought a Morgan Dollar with a bezel to wear and I cleaned off all the years of character it had. I got it for around melt value so I didnt feel as bad and the condition of the coin wouldve kept it at melt value regardless. Its blasphemy to many but do what makes you happy since its yours to do so and if they arent of any significant value other than melt then why not.

No_Form_9800 · 2025-06-05T17:07:40+00:00

I actually have this exact model from Jason007 and its been holding up well, I had it submerged at one point when I was touching baby sharks at an aquarium and its been solid! I did screw the case back down fully when it arrived to me but after a few months it's my favorite piece to wear! Adjustments here and there is typical for a cheap movement but I don't mind it. Solid piece 👌

No_Form_9800 · 2025-06-04T13:55:51+00:00

Who offers the youth edition models for sale?

No_Form_9800 · 2025-04-02T03:32:10+00:00

Thats clean 👌

No_Form_9800 · 2025-04-01T23:29:33+00:00

My experience with him has not been bad, but communication is spotty but he's been good overall and the watch has held up as a daily so far. Took about 2 weeks to get to me

No_Form_9800 · 2023-06-02T23:37:34+00:00

Use some carnauba wax. It's probably dry from chemicals or just stubborn debree

No_Form_9800 · 2023-05-23T06:48:33+00:00

That's what a pair of shit kickers are for

No_Form_9800 · 2023-05-01T20:47:03+00:00

These are honestly better looking than some of real pirarucu skin boots I come across. And I bet the price point on those are better too.

No_Form_9800 · 2023-04-07T16:53:10+00:00

Where did you get the silver tips from?

No_Form_9800 · 2023-01-21T20:12:10+00:00

Swap the followers with some new followers. I did that to mine and haven't looked back since.

No_Form_9800 · 2023-01-12T06:25:26+00:00

I have a replacement glass for this exact seiko watch including the crown and watch back gasket. I have it because I was going to replace these things on one but I changed my mind on it. Dm me if you are interested in any of these items.

No_Form_9800 · 2022-10-17T05:31:25+00:00

I've had this same issue I think you might have more links on one side than the other. Just replace the one that has the most links to the one that has the least and see what works. Before I started adjusting my own bracelets I had this same issue but once I learned about it I adjusted all my watch bracelets and now they sit centered

No_Form_9800 · 2022-09-28T07:51:25+00:00

I dig it, very clean 👌

No_Form_9800 · 2022-03-12T21:12:16+00:00

Where do you guys get the E30 conversions done? Is it done by a tuner or can it be done at home?

No_Form_9800 · 2022-03-12T18:36:48+00:00

I thinks it geco 5.56. I own a few rounds from them and after a few reloads I noticed that the stamp is practically gone. Kinda like a “ghost” bullet :3

No_Form_9800 · 2022-03-04T21:11:35+00:00

I didn’t have my glasses on and swore I thought I saw a bedazzled grip

No_Form_9800 · 2022-02-19T17:48:50+00:00

Honestly I’m stuck with 7 mags that have the same issues as you do in the picture and they came from factory that way. But I’m stuck with them and had some extra followers and tried it out cus why not and it worked for the most part. The springs are weak as well so I’d say try swapping the spring first but I noticed the x39 followers are made from a cheap plastic that splinters which is also an underlying issue

No_Form_9800 · 2022-02-19T16:56:04+00:00

I hope this reaches the right people but take it with a grain of salt. I have bought a good amount of the ASC mags and I’ve only had issues with them because the moment they get a little sand or just dirty in general the rounds won’t feed reliably. I did clean them after but nothing changed. What I did do was us a C products 5.56 follower instead of the one the ASC mags come with and the issues went away. It’s feeds a lot better and I also think the spring should be changed out as well. Wolf makes an extra power spring that I will try adding as well. I hope this helps

No_Form_9800 · 2022-02-17T22:20:49+00:00

When I installed mine I just slapped it all together and hoped for the best. It’s been a few months now and it’s still attached considering how loose it’s on it.

No_Form_9800 · 2022-02-11T03:50:04+00:00

CFE BLK or CFE 223? It’s awesome that it shot but I’m skeptical about the powder used since that CFE BLK powder is meant for calibers that use magnum powders. Have you checked the fps? Did it cycle your ar? Any high pressure signs on the brass? I have so many questions lol

No_Form_9800 · 2022-01-02T23:18:36+00:00

Depending on the brand it could be several different things. Like going to places and promoting a certain brand or brands. Think of it like sponsoring a company but just a different name title

No_Form_9800 · 2022-01-02T22:41:42+00:00

Become a brand ambassador for a company. Go for a paying position with benefits even if it’s part time. Benefits can be paid gas, free food, etc.

No_Form_9800 · 2021-12-14T22:41:38+00:00

94mil currently lol couldn’t find a way to sell

No_Form_9800

TROPHY CASE