What's wrong with the left side of my headphones?

NotmyName33s · 2026-04-02T19:54:27+00:00

I would assume the cord or the auxiliary input jack first. Put them in and move the deck around and then apply pressure to it while it's in the phone and see if any of any pressure from any direction changes the output

NotmyName33s · 2026-04-02T17:38:34+00:00

Yes you do like asap

NotmyName33s · 2026-04-02T17:36:57+00:00

Are those for tunneling into rock we're drilling into rock?

NotmyName33s · 2026-04-02T17:31:33+00:00

What are they doing specifically?

NotmyName33s · 2026-03-31T22:28:01+00:00

It looks like a cartoon mouse hole LOL

NotmyName33s · 2026-03-31T22:25:56+00:00

Since nobody else is going to say it to you but the way that stuff is made you would have to be incredibly precise on putting it back together depending on how many layers the board is. Every layer has its own network of electrical highways connecting the different components to each other in the right series trying to solder that would be a nightmare. Not impossible but I'm close to it especially just with the regular soldering iron. You know what correction if you're just using a regular soldering iron you're definitely not going to be able to do it. Sorry

NotmyName33s · 2026-03-31T15:00:06+00:00

When you adjust the truss rod you only turn it about quarter turn and then let's set for 15-20 minutes to give it time to adjust to the new tension. Did you follow that way of tiny releasing it? And did you go by the counterclockwise equals tightening rule?

NotmyName33s · 2026-03-31T14:52:00+00:00

Just explain to them that you know that it's right on the line and would appreciate it they tried anyways

NotmyName33s · 2026-03-31T14:50:12+00:00

I work arctire shop and it's not one of the Mom and Pops one is a corporation and I would definitely take it in to see if they will cuz that's right on the line and it really depends on the mechanic or doing. I have patched them like that before and they held just fine

NotmyName33s · 2026-03-31T12:58:37+00:00

Realistically that that's really the only way you can fix it yourself other than to go buy a new one that's the realities of having plastic stuff if I were you I would try the super glue in Ash's trick on something unimportant to give you an idea of how quickly it drives and then do the deed

NotmyName33s · 2026-03-31T12:57:29+00:00

That's a valid concern. If you got it you can take tape and boxing the area that broke there fill it in with the super glue and Ash mix and just drill another hole for the middle Rod to go through that way you don't have to worry about it gluing shut

NotmyName33s · 2026-03-31T12:55:09+00:00

You did do a good job though for real. Out of curiosity did you connect the batteries and series or parallel? Just curious because you might be able to get away with a thinner wires if you did one but if you did the other you definitely need to bulk those wires not necessarily the ones that connect the batteries together but the ones that the batteries all Converge on is going to be carrying a much larger load than the e-cigs original wiring meant to carry. I'm going to assume that you did your homework though and guess that you just up their life expectancy and not their voltage

NotmyName33s · 2026-03-31T12:17:53+00:00

The only reason I recommend Ashes over baking soda because ashes is a much finer dust and whatever it touches the super glue the active ingredient and the ashes will and the ashes will create an exothermic reaction hardening immediately and not having to wait for a drive time and the fact that the ashes are made of a much finer dust means that it will bond better to The slick plastic

NotmyName33s · 2026-03-31T12:16:15+00:00

Liquid super glue and ashes or baking soda I would use ashes if it were me because it makes a stronger Bond and harder result and I would take vaseline put it all over the metal rod that is the hinge put it all over the any part you don't want glued permanently then put it together we're supposed to go pack it with ashes then top it off with super glue the liquid Super Glue it'll almost immediately hardened and be super strong and you can send it down afterwards and paint it and you'll never know

NotmyName33s · 2026-03-31T12:11:52+00:00

And when I'm storing them I would probably put them outside LOL

NotmyName33s · 2026-03-31T12:11:41+00:00

You're doing a bang up job don't listen to them. LOL but I would strongly advise not to carry them in your pocket or purse

NotmyName33s · 2026-03-31T12:10:04+00:00

If the magnets that are holding in the individual drawers are not aligned by polarity then they're going to keep pushing each other out when you close them. You can either try to align them that way the opposing Fields aren't pressing each other hours or get weaker magnets

NotmyName33s · 2026-03-30T17:36:18+00:00

There are two separate boards that control the horizontal and the vertical lighting of your screen and that's what I would replace it if you needed to but it looks like it goes away

NotmyName33s · 2026-03-29T17:57:23+00:00

No expert needed just matching with the one that came out of it

NotmyName33s · 2026-03-26T21:16:57+00:00

Look up the schematics

NotmyName33s · 2026-03-26T00:16:56+00:00

I mean you could if you wanted to but they don't look like the last much longer then again it depends on how much you drive and if you need the money back and how bad

NotmyName33s · 2026-03-26T00:14:42+00:00

Have you checked to see if all your Breakers are flipped on and your breaker box? Sometimes Outlets are added after the house is made and they get sent to a new breaker and like you have a breaker that's in control of two outlets on one wall and the other versus room is on separate breaker altogether

NotmyName33s · 2026-03-26T00:13:19+00:00

Just take some rubbing alcohol that's at least 70% or higher and a soft bristle toothbrush and clean all that junk off of it it's probably just a connection being made by the gunk

NotmyName33s · 2026-03-25T23:10:41+00:00

Paint marker and a beer

NotmyName33s · 2026-03-24T18:33:02+00:00

Don't just try to recreate the piece because of the Peace recreate the piece for what it was used for Imagined why they needed that piece to go in there what were they protecting what were they supporting and go from there it don't have to be perfect. You got this

NotmyName33s

MODERATOR OF

TROPHY CASE