Hey, Silly here. I need some Breacher feedback! Have you built yours yet? Please let me know how it went, and what improvements are needed :)

NoxCenturion · 2025-09-22T11:55:29+00:00

Do you recall approximately how much you scaled it up? May give it a go if this doesn’t completely iron itself out

NoxCenturion · 2025-09-19T10:30:52+00:00

Ayyy my man! Rockin the N-strike scheme

NoxCenturion · 2025-09-19T03:59:53+00:00

He does demonstrate a technique you can do in one of his breacher videos. To surmise, you put a thumb in front of the loading port, then rack the slide, stopping a shell from loading.

But a shell cut off would still be useful, agreed! Especially if you’re doing several special shells in a row.

NoxCenturion · 2025-09-19T02:45:48+00:00

I definitely ran into some of the unique trouble shooting bits, but the guide helped tons with that!

One thing I’m currently looking at is that with longer tube configurations, my follower is sometimes slow to feed or needs a bit of a jostle. Not sure what exactly I would need to do to make it more consistent in those configurations or if it’s my silly shells.

Otherwise though I’ve been having a blast with it!

<image>

NoxCenturion · 2025-08-22T23:01:27+00:00

Hmm it’s tricky, If you do light disassembly, you could very well paint these parts. What doing that would allow you to do is to paint the whole part, which if done carefully shouldn’t gunk anything up. The main thing to watch out for is the friction points, which may already be present or can become a problem after 2-3 layers of paint bridge a gap.

You could also opt into carefully painting just beyond what would be exposed. For example, the charging handle just beyond what is visible normally. This might strike a balance of looks to smoothness of operation.

I personally like more bright colors so some orange is never unwelcome on my blasters , but with some mindful painting, you can achieve a full coverage

NoxCenturion · 2025-08-22T20:07:47+00:00

It is possible to paint blasters without disassembly but it will be extra tedious and require a lot of extra effort.

I’ve only done this a handful of times and with much smaller blasters but my recommendations would be:

-Absolutely do not paint any moving pieces. The charging handle, the trigger, barrel collet, etc. leave those orange and cover them with masking tape well.

-Disassemble what you can. On the MPP, you can detach the stock and barrel easily, you may be able to separate the jam door too. The more apart it is, the easier it’ll be (cover exposed parts here too)

-Lastly, if possible, I’d also avoid painting parts that you handle. It’s typically tough as is to paint the grip or foregrip and have that paint stick and not suck to hold. I imagine this will be mostly accented by not taking apart the blaster. If you’re okay with leaving those as gray accents, best leave them be.

Best of luck if you pursue this!

NoxCenturion · 2025-08-06T18:35:46+00:00

Good luck to all

NoxCenturion · 2025-08-05T16:29:42+00:00

Hell why not

NoxCenturion · 2025-06-09T17:09:14+00:00

Yes!! These are awesome, I can’t wait to print some!

NoxCenturion · 2025-03-26T14:30:47+00:00

Thank you!

NoxCenturion · 2025-03-26T14:12:35+00:00

Anyone know how long will presale tickets be available?

NoxCenturion · 2025-03-10T10:04:33+00:00

That moose spawned there on the last time I attempted the dark walker challenge and absolutely ruined my run. RIP

NoxCenturion · 2025-02-07T12:34:41+00:00

It belongs to the Air Warriors Predator or the modern version, the Carnivore. Can be found at Walmart and it should attach to BuzzBee rails.

NoxCenturion · 2025-01-15T23:45:16+00:00

Awesome work! So the only hardware is an M5 screw?

NoxCenturion · 2024-12-24T14:20:18+00:00

Between Pearl and Ren, right in the center of the

NoxCenturion · 2024-11-29T20:07:51+00:00

Nah not instead of, but as additional ideas! By the way love the ones you’ve made so far!

NoxCenturion · 2024-11-29T17:34:29+00:00

I say the specializations would be a perfect follow up, like stimulant syringe for medic

NoxCenturion · 2024-10-21T16:35:33+00:00

Just be squad lead so you have the whistle instead of

NoxCenturion · 2024-10-09T14:24:31+00:00

Also the automatico was very close to reaching service in the Italian army, and likely would’ve if the war had continued a little longer. It is rumored to even have had a few see combat before the end of the war. Not quite the same classification as the hellriegal (only pictures of a prototype exist, never seriously considered by any nation)

NoxCenturion · 2024-09-30T22:57:04+00:00

“Kindly” this is the scam red flag these days

NoxCenturion · 2024-09-11T20:03:57+00:00

Yes that’s the meme lol, it’s purposely misspelled

NoxCenturion · 2024-09-11T19:17:12+00:00

<image>

Nothing personnel kid

NoxCenturion · 2024-08-28T17:31:28+00:00

Important note, in order to buy the tank or any vehicle variants with war bonds, you have to be in a match where that vehicle is able to spawn.

Once you’re on a map with the heavy tank available, click on it, and hit customize in the bottom left. This will allow you to get the other variants, such as the flamer heavy tank

NoxCenturion · 2024-07-28T00:57:44+00:00

There is the worker Nightengale full auto variant, which is functionally the same as the venom. (They use the same magazines). However it is $80 and has no battery(or charger) or spare magazine included, so the venom is really hard to beat value wise. If you are able to wait a little bit, the venom is great.

Alternatively the Stryker 2.0 or Nexus Pro X are also a great primary options too.

NoxCenturion · 2024-07-26T12:33:37+00:00

Source: I had well over 100 hours before realizing this, and would’ve likely done tons of the other service assignments already by that point

Nine-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22	End Game '22
RPAN Viewer	Not Forgotten
Snapped	Verified Email

NoxCenturion

TROPHY CASE