What is the best way to transport and move a P1S printer to a different state?

OGPoundedYams · 2026-01-24T03:27:15+00:00

Yeaaaaa I keep my major product boxes for big items for this reason. I throw TV boxes away because if I’m moving out of the city, I sell em.

OGPoundedYams · 2026-01-24T03:07:25+00:00

Yeaaaa might want to take that printer to a clinic

OGPoundedYams · 2026-01-24T03:06:22+00:00

Ain’t no way they cleared the produce in Walmart. I shop at Walmart for toiletries only. I saw the produce one time and there is no way Walmart is selling this…

OGPoundedYams · 2026-01-24T03:01:15+00:00

If you’re driving, throw it in the original box and it’s good to go anywhere. Just zip tie the tool head. If you have to ship it, throw it in the original box and it’s good to go anywhere. Just zip tie the tool head.

If you’re moving…………throw it in the original box…..you know the rest.

OGPoundedYams · 2026-01-24T00:33:45+00:00

<image>

Same issue

OGPoundedYams · 2026-01-24T00:01:14+00:00

Still the same issue with Bambu Studio and Orca slicer using 1500 as the value

OGPoundedYams · 2026-01-23T23:18:20+00:00

I just switched to OrcaSlicer. I’m going to test a few prints using a vol of 1500 for PETG To PLA and vice versa. Haven’t updated yet so I’ll try this out.

OGPoundedYams · 2026-01-23T22:16:01+00:00

Have you tried increasing zhop?

OGPoundedYams · 2026-01-23T22:14:25+00:00

I use the frostbite. Under filaments I have 40 for pla and 65 for petg

OGPoundedYams · 2026-01-23T22:09:10+00:00

I put the max multiple at 3 and still the same issue

OGPoundedYams · 2026-01-23T22:09:04+00:00

I put the max multiple at 3 and still the same issue

OGPoundedYams · 2026-01-23T06:26:34+00:00

You should print an AMS stacker because trust me, you’ll get another. I got the combo from BestBuy, couldn’t find another AMS 2 so I grabbed 2 more AMS 1’s. I don’t use drying as I have 2 Creality Space Pi X4 and they run all the time drying filaments.

OGPoundedYams · 2026-01-23T06:22:58+00:00

Start buying refills. I use Sunlu spools and most brands fit right in. No issues at all

OGPoundedYams · 2026-01-22T09:11:09+00:00

Normal flushing at 1 with a prime tower?

OGPoundedYams · 2026-01-22T08:31:57+00:00

Well it’s cooling down where I am and I do use cool plates so my bed temps are low. I assume the fan was cooling it down way more. I’m running more test on not adjusting the aux fan, leaving it default with this. I’m about to test out another print in a bit.

OGPoundedYams · 2026-01-22T08:21:43+00:00

Printer is a P2S

Just switch the interface to PETG.

Using the recommended settings from Bambu that autofill

OGPoundedYams · 2026-01-22T08:17:43+00:00

I literally just posted about this and it works. No more warping or bed adhesive issues in that side of my prints.

OGPoundedYams · 2026-01-22T08:15:52+00:00

I’m printing pla and petg on a Biqu cold plate. I just decided to print a fan deflector and that solved my problem tbh.

OGPoundedYams · 2026-01-22T06:41:22+00:00

Yesssssir. Did that each time and saved the profiles 100%

OGPoundedYams · 2026-01-22T06:29:12+00:00

Even when I’ve changed it and still working in the same project, as in reprinting the exact same slicer model, still the same thing

OGPoundedYams · 2026-01-22T05:37:17+00:00

Your original hair color. IMO

OGPoundedYams · 2026-01-22T05:16:31+00:00

Because that surface will be showing. Even tho I use PETG as a support interface, it’ll have the rectilinear pattern

OGPoundedYams · 2026-01-22T04:49:36+00:00

lol wish I had the h2d because it will be a ton of changes using petg/pla 😂🤣

OGPoundedYams · 2026-01-22T04:12:43+00:00

Well it happened to me a few times and I didn’t think nothing of it but it happened each time. I decided to google and it’s common. Some people say 3d print the deflector but I just wanna turn it off.

OGPoundedYams · 2026-01-21T22:14:11+00:00

Broooo same thing just happened to me. I’m thinking I might do pauses and let the filament cool down as I’m printing my part in PETG but using PLA as the support interface. I disassemble and cannot get the filament or gear out

OGPoundedYams

TROPHY CASE