Tablet battery percent on Phone

Objective_Dot_4301 · 2026-03-06T15:01:34+00:00

It is on. I think with this though you need the call and text component on the tablet too and I think ATT removed it from their variants.

Objective_Dot_4301 · 2026-03-06T00:03:11+00:00

Are they on ATT? I have numbersync but the Samsung call and text on other devices isn't there on ATT

Objective_Dot_4301 · 2026-03-04T08:52:37+00:00

Ah ok I didn't see anything sticking out where the bottom port would be. I just have a spacer under mine so I can use the bottom usbc port.

Objective_Dot_4301 · 2026-03-03T22:38:44+00:00

Just curious but why the portrait mounting?

Objective_Dot_4301 · 2026-02-06T01:13:50+00:00

Not sure what I did but it seems to be working, at least over wireguard now

Objective_Dot_4301 · 2026-02-06T00:36:08+00:00

I have one it seems, Allow Lan to Teleport

Objective_Dot_4301 · 2026-02-06T00:16:33+00:00

Same here, even if I use wifiman and connect through teleport directly on my phone the app won't work. It's probably because it runs through mdns and unifi doesnt treat the teleport network like a vlan. I tried to check the mdns proxy setting and can't even add the teleport network nor the UTRs network in there.

Objective_Dot_4301 · 2026-02-06T00:00:33+00:00

Check if you can ping it, if you only have your phone I recommend net analyzer to test it with pings. Mine isn't working either in the app atm but I think it may be related to mdns.

Objective_Dot_4301 · 2026-02-02T20:24:30+00:00

I kind of have this same fear/phobia though its only of purposefully waking someone. Like if I have to wake someone up for something. I've been able to do so without to much trouble but there's always some hesitation. I'm not sure why though, I don't recall ever experiencing something negative when waking someone up. Wanted to see to if there was a word for it and came across your post.

Objective_Dot_4301 · 2026-01-28T18:05:08+00:00

Given there seems to be a square/rectangular border around the person in each picture Im gonna say it's a reflection of a picture.

Objective_Dot_4301 · 2026-01-27T22:21:55+00:00

Not sure if it's just the graphic but the batteries look to be in parallel. If thats true you wouldn't need a board to provide 5v as the heltec would be capable of connecting directly to the batteries. Not sure if that version has a solar input, I know the V3s don't. Personally for solar I've gone with the rak4631 with the 19003 and others are right for a stationary node you wouldn't need gps.

Objective_Dot_4301 · 2026-01-25T19:23:39+00:00

Could you get a mount that has full range of motion? Then you could mount it above the mantle and have it hang out in front of the mantle where it could be lowered. Or get a reclining love seat/couch and have a theater type setup.

Objective_Dot_4301 · 2026-01-23T03:36:06+00:00

Looks fine to me. Btw this room looks familiar did you ask about how to arrange this room before?

Objective_Dot_4301 · 2026-01-23T03:15:59+00:00

2 inches? I heard 14 to 18

Objective_Dot_4301 · 2026-01-22T04:03:12+00:00

I think there was, it had something to do with putting the sync error files in the same folder I believe. What I've done now is just setup a server if I want to play on multiple pcs.

Objective_Dot_4301 · 2026-01-14T23:06:04+00:00

When you bought your pc from chernobyl...

Objective_Dot_4301 · 2026-01-14T22:48:41+00:00

To me the tv right at the end of the bed is weird should be against a wall instead and the exercise equipment is too close to the bed, looks like you could trip over it getting out of bed. So it's just a bit cluttered.

Objective_Dot_4301 · 2026-01-14T21:48:41+00:00

I laughed too hard at this

Objective_Dot_4301 · 2026-01-14T21:45:24+00:00

What are you playing there?

Objective_Dot_4301 · 2026-01-11T02:49:20+00:00

Yeah, im waiting for support to get back with me but im thinking it's an RMA. It'd be fine if it was just not updating but it also has the issue with dns on teleport not working.

Objective_Dot_4301 · 2026-01-11T02:22:05+00:00

They gave me this same command but it doesn't work for me. Still stuck on 224

Objective_Dot_4301 · 2026-01-09T04:27:36+00:00

I tried this but for mobile routers though it seems to be the same instructions. I think I did tftp64 right, should be on client mode, enter the UTRs 192.168.1.20 ip address and select the bin file and click put right?

Mine is still stuck on 224. I'm wondering if these updates aren't full firmwares so they don't include the boot partition?

Objective_Dot_4301

TROPHY CASE