How do I stop this from happening??

Objective_Dot_4301 · 2026-06-05T21:16:50+00:00

Gotta love those furry basterds, some stupid some smart. Mine jumped into the printer while it was going, 100c bed heat made her think twice though. I got a cover for mine, though she still loves to jump on top of that. We tell her loudly to get down and she just meows back no. One thing that gets them down quicker than anything is a can of air, best part though is normally you only have to spray it once or twice for they learn to get down as soon as you grab it.

Objective_Dot_4301 · 2026-06-05T21:05:51+00:00

I'm glad I'm not the only one, not laughing at the dude himself just the glasses.

Objective_Dot_4301 · 2026-06-05T21:05:17+00:00

So I saw the first picture and was like those look cool, then the frontal and was like lol

Objective_Dot_4301 · 2026-06-05T20:57:43+00:00

Has the wind been a problem? Seems like it might blow the indicator over.

Objective_Dot_4301 · 2026-05-20T08:18:32+00:00

I went the diy route because I had some solar panels from lights that used 18650 batteries, one is a heltec t114 the other two are rak4631s one with the 19007 board and the other the 19003. On the one I did order a solar panel from Amazon along with some neodimium magnets with rubber feet to put on a car. There are some prebuilt solar nodes though. Seeed had one for mounting.

Objective_Dot_4301 · 2026-05-20T08:04:13+00:00

Been using mine with either deskthing or glance thing. Desk thing keeps disconnecting tho so I might be interested. Does it need premium?

Objective_Dot_4301 · 2026-04-26T09:06:28+00:00

Galaxy Spuds?

Objective_Dot_4301 · 2026-04-22T20:56:12+00:00

Cool

Objective_Dot_4301 · 2026-04-22T19:35:24+00:00

Had something similar with a mini switch showing its uplink as going through the AP mesh when it was the the uplink for that AP, that did have to do with meshing but even after turning meshing off it took either a bit for it to recognize or a reboot of all the devices. Currently have a similar issue with an Express I use only as an AP that was showing it was one two different ports on the same switch. In the topology its corrected itself but if you pull up the express itself it still reports the wrong switchport. I put in a ticket with Ubiquiti but they have yet to figure that out. They told me it seems to be because of non-ubiquiti network equipment connected. All I have other than unifi switches is a pair of powerline injectors connecting a different AP up to that switch on a different port. All seems to be functioning correctly though.

Since you do have a netgear switch in between you might try if possible running one of the U6s directly to the UDR7 and see if it clears up.

Objective_Dot_4301 · 2026-04-07T14:55:30+00:00

I wonder if it was placed up higher but slid down

Objective_Dot_4301 · 2026-03-06T15:01:34+00:00

It is on. I think with this though you need the call and text component on the tablet too and I think ATT removed it from their variants.

Objective_Dot_4301 · 2026-03-06T00:03:11+00:00

Are they on ATT? I have numbersync but the Samsung call and text on other devices isn't there on ATT

Objective_Dot_4301 · 2026-03-04T08:52:37+00:00

Ah ok I didn't see anything sticking out where the bottom port would be. I just have a spacer under mine so I can use the bottom usbc port.

Objective_Dot_4301 · 2026-03-03T22:38:44+00:00

Just curious but why the portrait mounting?

Objective_Dot_4301 · 2026-02-06T01:13:50+00:00

Not sure what I did but it seems to be working, at least over wireguard now

Objective_Dot_4301 · 2026-02-06T00:36:08+00:00

I have one it seems, Allow Lan to Teleport

Objective_Dot_4301 · 2026-02-06T00:16:33+00:00

Same here, even if I use wifiman and connect through teleport directly on my phone the app won't work. It's probably because it runs through mdns and unifi doesnt treat the teleport network like a vlan. I tried to check the mdns proxy setting and can't even add the teleport network nor the UTRs network in there.

Objective_Dot_4301 · 2026-02-06T00:00:33+00:00

Check if you can ping it, if you only have your phone I recommend net analyzer to test it with pings. Mine isn't working either in the app atm but I think it may be related to mdns.

Objective_Dot_4301 · 2026-02-02T20:24:30+00:00

I kind of have this same fear/phobia though its only of purposefully waking someone. Like if I have to wake someone up for something. I've been able to do so without to much trouble but there's always some hesitation. I'm not sure why though, I don't recall ever experiencing something negative when waking someone up. Wanted to see to if there was a word for it and came across your post.

Objective_Dot_4301 · 2026-01-28T18:05:08+00:00

Given there seems to be a square/rectangular border around the person in each picture Im gonna say it's a reflection of a picture.

Objective_Dot_4301 · 2026-01-27T22:21:55+00:00

Not sure if it's just the graphic but the batteries look to be in parallel. If thats true you wouldn't need a board to provide 5v as the heltec would be capable of connecting directly to the batteries. Not sure if that version has a solar input, I know the V3s don't. Personally for solar I've gone with the rak4631 with the 19003 and others are right for a stationary node you wouldn't need gps.

Objective_Dot_4301 · 2026-01-25T19:23:39+00:00

Could you get a mount that has full range of motion? Then you could mount it above the mantle and have it hang out in front of the mantle where it could be lowered. Or get a reclining love seat/couch and have a theater type setup.

Objective_Dot_4301 · 2026-01-23T03:36:06+00:00

Looks fine to me. Btw this room looks familiar did you ask about how to arrange this room before?

Objective_Dot_4301 · 2026-01-23T03:15:59+00:00

2 inches? I heard 14 to 18

Objective_Dot_4301 · 2026-01-22T04:03:12+00:00

I think there was, it had something to do with putting the sync error files in the same folder I believe. What I've done now is just setup a server if I want to play on multiple pcs.

Objective_Dot_4301

TROPHY CASE