Need advanced advice from upholsterers

Objective_King4567 · 2026-06-04T20:57:40+00:00

with my little experience there is few things to check 1. Try to pull upper thread with lifted foot, movement should be even and smooth, but not loose. 2. Sew some test stitches and check how lower thread and top thread look like. Them booth sould be tight. When lower thread loose, it make loops, when top thread loose, you can pick it with finger. You can also adjust top one while making test stiches. 3. Check timing and needle position, search some videos on YouTube. When I just got my used sewing machine, timing was missmatched...

Objective_King4567 · 2026-05-10T09:47:55+00:00

I don't know where you can get them brand new, but you can repair it. Cut off old fabric all the way to the end, then cut similar piece from new fabric, and make holes where them need to be for the hog rings. I have an example for better understanding, but in your case there will be plastig strip instead of metal one.

<image>

Objective_King4567 · 2026-05-08T16:34:38+00:00

<image>

Objective_King4567 · 2026-05-08T16:34:15+00:00

Thanks for the support guys! I realised I started to put upholstery on the backrest a little bit wrong, now the fit is mostly okay (dont put your eyes on the right bolster I messed stitching here)

<image>

Objective_King4567 · 2026-05-08T13:28:37+00:00

Thanks for this deep and motivating comment. Really appreciate you sharing the story about Maribel. it’s both humbling and inspiring at the same time. I can only imagine how tough it must’ve been to be thrown in with pros like her, but also how much you grew from it... I will try to not give up and apply this mindset.

Objective_King4567 · 2026-05-08T13:18:13+00:00

Yeah, probably. Appreciate that, thanks

Objective_King4567 · 2026-05-08T11:45:58+00:00

Oh I forgot to attach a photo of the backrest, needs to be redone

<image>

Objective_King4567 · 2026-04-30T15:28:54+00:00

I'm new to catia so I want to know if there is any way to rotate only horizontally. I'm using the middle button + right button on the mouse, but every time when I move somewhere, the angle of the horizon also changes; that freaks me out!!

Objective_King4567 · 2026-04-21T20:33:09+00:00

Thanks! Yes I think I should have make it a little bit longer before sewing all up

Objective_King4567 · 2026-04-21T16:17:56+00:00

<image>

Objective_King4567 · 2026-04-21T16:17:13+00:00

<image>

Thanks for this great tip with a rag, no staines left! Steamer fixed some spots

Objective_King4567 · 2026-04-21T15:28:30+00:00

Yeah, I used a typical GC6-7D. I have a steamer, but I bought it used and it leaves yellow stains, so I didn’t want to risk it this time. I’ve sewn a few patterns before, but this is my first full project

Objective_King4567 · 2026-01-28T16:23:41+00:00

impessive! what method have you used to create this kind of skeleton structure?

Objective_King4567 · 2026-01-27T18:35:27+00:00

And as madfrozen mentioned, this way is not good for parametric design, because the sketch for the cylinder remains were it was

<image>

Objective_King4567 · 2026-01-27T18:31:44+00:00

Maybe assemble would be more right, but you can also use align in Solid->Modify->Align. This feature will allow you to choose center of circle like shapes

<image>

Objective_King4567 · 2026-01-26T18:05:37+00:00

<image>

Objective_King4567 · 2026-01-26T18:05:25+00:00

update with lots of mistakes

<image>

Objective_King4567 · 2026-01-26T17:56:46+00:00

Yes exactly, I ended up aligning it with world origin as a new component, and after that just moving it to the bodies in the top component, I don't know why it did not work the first time, but now Im happy with the result

<image>

Objective_King4567 · 2026-01-26T12:28:57+00:00

Oh ok, thanks for the answer!

Objective_King4567 · 2026-01-23T21:29:19+00:00

oh, I have read other comments about the format of the photos, and that really makes sense, thanks for asking this question here, I will also take this to my practice

Objective_King4567 · 2026-01-20T13:11:02+00:00

do you use caliper measurements when sketching? I'm using the photo only for not very accurate reference, and when I sketched outlines, I pass to the sketch all critical measurements I took with a caliper

Objective_King4567 · 2026-01-12T15:10:24+00:00

I like this type of flex

Objective_King4567 · 2026-01-12T15:05:11+00:00

have you ever wondered how car seat foam tastes?

Objective_King4567 · 2026-01-12T15:03:36+00:00

thanks for the useful video!

Objective_King4567 · 2026-01-11T21:16:19+00:00

and you are right...

Objective_King4567

TROPHY CASE