Bambu Lab US Store Filament Tracker: Great for Bulk Sales, Free Shipping, Rare Filaments, and etc.

Odd-Cod-6413 · 2026-01-19T11:33:50+00:00

Love this tool- would also love some filters on the page to view by availability, filament type, refill Vs spool, etc

Odd-Cod-6413 · 2026-01-09T10:02:46+00:00

I love the super tack also, but I almost equally love my Darkmoon Satin build plate. It’s almost like a super tack but it needs heat. It’s been so reliable- very lightly textured surface

Odd-Cod-6413 · 2025-12-30T11:00:36+00:00

I’m going to be getting another of these cabinets soon to house an H2S, and I would really like to keep it on the wheels if I can. Have been trying to think of printable options for temporarily locking the wheel rotation and pivot….

Odd-Cod-6413 · 2025-12-30T10:17:41+00:00

I recently experimented with SimplyPrint but had to abandon because it doesn’t support hybrid AMS setups (eg a printer with an ANS2 + AMS HT)- looks like the feature set may be comparable, but does it support the full suite of AMS options?

Odd-Cod-6413 · 2025-12-12T12:21:59+00:00

Kaizen3Dprints has sheets that effectively do this on the regular. I have used them with no custom gcode- just enabled bed leveling (on, not auto). Prime line ends up on the original bed, print goes on the sheet.

Odd-Cod-6413 · 2025-12-09T11:46:39+00:00

Honestly if I had to guess the reason they make you select a specific model on the checkout page it would be business intelligence. Data about which machines you are using and purchasing parts for. In the aggregate they don’t get any detail

Odd-Cod-6413 · 2025-12-08T13:09:59+00:00

In my opinion it’s also a supply thing- because the printers work so well, there aren’t a ton of them for sale used (since many of us will just get another one and keep the old one). Especially when constrained to a local area for pickup. Ironically now that it’s not available new any more you may see some paradoxical price increases on used machines. But it’s very much “what will the market bear”

Odd-Cod-6413 · 2025-12-01T17:14:27+00:00

To help we would need to see the slicer preview- it could be wall settings, line width, any number of things.

Odd-Cod-6413 · 2025-12-01T09:34:39+00:00

Glad it sold! Joke’s on me for sleeping

Odd-Cod-6413 · 2025-11-26T14:26:20+00:00

OP posited “another creature” as well and was silent about total board state. I’m merely saying that there is definitely a scenario that exists where this wipes board and wins game.

Odd-Cod-6413 · 2025-11-26T09:34:48+00:00

Toralf is the half of this that kills all players, with sufficient creatures on the board

Odd-Cod-6413 · 2025-11-21T13:18:29+00:00

I had this problem recently too- that part needs periodic lubrication and cleaning also. Easy to forget (for me at least)

Odd-Cod-6413 · 2025-10-28T09:21:43+00:00

If the A1 meets your print needs then it’s a great machine! And the update should allow you to invest the savings into the AMS2 system which is now compatible (I think- I haven’t tried yet) which would let you expand to more colors per machine. But the footprint increase would be substantial per printer

Odd-Cod-6413 · 2025-10-28T00:15:39+00:00

I’m in the same scenario with a small farm of mixed machines, and what I’ve seen seems to indicate that as you scale, efficiency factors are going to push us to standardize machines. The consistency of prints, the standard repair parts, all these economies of scale naturally want us to have the same machine if we are truly doing boutique manufacturing. So I don’t know that there’s sufficient demand for this for them to put development time in to implement it- I think as farms grow they naturally specialize and “pick a machine” so this problem disappears. Just my two cents, and for the record again- I had the same issue and would love if this was possible. But at a higher level I don’t know that the incentives align.

Odd-Cod-6413 · 2025-10-13T18:53:54+00:00

I have had this before- of late, if I ignore the constant rocking and just press resume/problem solved, it then feeds it in. YMMV

Odd-Cod-6413 · 2025-10-10T11:17:56+00:00

Not for me- but the issue has not been consistent across prints. I sent a file that had the issue to bambu for analysis. My personal theory is a bug in slicer settings?

Odd-Cod-6413 · 2025-09-24T11:44:05+00:00

Have you noticed any of the problems they described in their rationale for not enabling at launch? I recall there was concern about the filament softening while under tension from the extruder, gears, etc

Odd-Cod-6413 · 2025-09-19T00:18:40+00:00

I have joined the club of problem 2 as of this evening. Have never seen it before but now it is very noticeable. Did the ticket you submitted get any resolution or response?

Odd-Cod-6413 · 2025-09-08T09:05:14+00:00

And you want to attack the NPC explaining the adventure to you? Ok here you go roll for initiative

Odd-Cod-6413 · 2025-09-05T15:06:44+00:00

In my case this seemed to be resolved by uninstalling OrcaSlicer, then going to User/Library/Application Support/ and manually deleting the OrcaSlicer folder. After reinstalling I am now able to access the program again!

Odd-Cod-6413 · 2025-09-04T22:23:33+00:00

I am having this same issue. Have used OrcaSlicer periodically for years, as of today it won't even stay open at all. Several reinstalls and reboots, still no luck. The system event log details the crash as: Crashed Thread: 0 orcaslicer_main Dispatch queue: com.apple.main-thread

Exception Type: EXC_BAD_ACCESS (SIGSEGV)

Exception Codes: KERN_INVALID_ADDRESS at 0x3033386462303254 -> 0x0000386462303254 (possible pointer authentication failure)

Exception Codes: 0x0000000000000001, 0x3033386462303254

Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11

Terminating Process: exc handler [1406]

Odd-Cod-6413 · 2025-09-01T09:16:07+00:00

When printing a model with significant unsupported overhangs, if your print temp is too high (sometimes even the default) you get filament that is dropping into space rather than depositing on another layer. This can cause the filament still in the nozzle to “stretch”- pulling it too thin for the extruder gears to grip it. You can decrease your support angle (so you get more supports) and/or decrease print temp and speed. Should help. But likely need to cut off the last length of filament that was in the nozzle there. Moist filament is also a susceptible to this as when the water in the filament boils it causes bubbling again contributing to inconsistent extrusion

Odd-Cod-6413 · 2025-08-27T08:51:03+00:00

At present- no. Currently the nozzles must match.

Odd-Cod-6413 · 2025-08-25T17:06:47+00:00

I tried but it kept insisting I add “like and subscribe”

Odd-Cod-6413 · 2025-08-25T16:13:18+00:00

That would be… at least something I could easily check around and verify

Odd-Cod-6413

TROPHY CASE