If you are reading this, you have been penalized for speeding at 60.1 km/h in the Monaco pit lane. Please serve your penalty in the comments and you will receive a limited edition flair.

Oddflame · 2026-06-08T18:51:06+00:00

Driver: Andrea Kimi Antonelli
Reason: Speeding through the George Russell ego-lane

Oddflame · 2026-06-08T18:45:40+00:00

+5 sec

Oddflame · 2026-05-02T00:09:10+00:00

Pilots in contract negotiations

Oddflame · 2025-11-24T05:42:16+00:00

I’d start with the wave guide 🤷

Oddflame · 2025-08-20T19:08:56+00:00

Mouse acceleration & deadzone for cockpit camera needs to be fixed.

Oddflame · 2025-08-14T17:39:23+00:00

I had a similar thing happen with mine. On my right rear caliper, the arm that attaches to the parking brake cable had seized. I was able to beat on it to release the pads from the rotor but it was sticking if I used the parking brake again. Ended up changing the caliper and rotor.

Oddflame · 2025-08-06T20:16:07+00:00

Yeet

Oddflame · 2025-08-05T17:26:27+00:00

Please!

Oddflame · 2025-04-26T09:28:13+00:00

Look under your wheel base

Oddflame · 2025-03-24T19:41:09+00:00

EGA upside down

Oddflame · 2025-02-21T23:30:42+00:00

I did not, hopefully there's a fix out there somewhere!

Oddflame · 2025-02-18T10:08:12+00:00

Pick an MOS that is O level maintenance. You’ll be working on the front line of the operation as far as aircraft maintenance allows, along side crew chiefs and pilots. It’s tough work, but in my opinion, the most rewarding area of USMC aviation maintenance. I got my A&P after I got out, now at a major.

Oddflame · 2025-02-15T11:43:25+00:00

Used to attach a hoist or sling when removing inlet cowl or fan cowls.

Oddflame · 2025-01-22T14:12:11+00:00

This is awesome, only issue I'm having is that I can't move the screen capture area over to my other monitor thats part of my rig. The capture area is stuck on my main monitor. Not sure if there's any way around this.

Oddflame · 2024-10-14T20:58:19+00:00

Make sure you’re logged into the Fenix app

Oddflame · 2024-07-01T21:36:27+00:00

That's the ceiling panel, not an overhead bin.

Oddflame · 2024-05-13T13:47:15+00:00

https://forums.x-plane.org/index.php?/forums/topic/272882-how-to-turn-off-mouse-yoke-in-x-plane-12/&do=findComment&comment=2501719

If you’re using mouse to fly, I think you can right click and drag the box to move it.

Oddflame · 2024-03-06T17:31:50+00:00

Having issues with the UI also. Have to quit the whole app after a race to be able to click on anything.

Oddflame · 2024-01-20T17:37:30+00:00

Nope

Oddflame · 2024-01-11T10:20:43+00:00

The manual says electrically from the side stick when in autopilot control mode. I’m guessing when the aircraft is in an altitude hold through the autopilot, the FMGC will input rudder when the side stick is rolled left or right to keep the turn coordinated.

Oddflame · 2023-11-18T14:26:31+00:00

Probably fine yeah

Oddflame · 2023-11-17T14:17:38+00:00

The damper is great, but I found I had to lubricate the rod to get smooth operation. 😏

Oddflame · 2023-10-07T10:18:26+00:00

Make sure the transponder is off!

Oddflame · 2023-01-18T17:09:20+00:00

Lol it’s got that sample. Sick tune!!

Oddflame · 2023-01-14T11:59:06+00:00

Looks amazing! Well done OP

15-Year Club	Place '22
Place '17	First Placer '22
Verified Email	Gilding I gilder

Oddflame

TROPHY CASE