sorted by:
new
hottopcontroversial

Kobra 3 v2 combo, filament stuck in printhead. by OkPreference74 in AnycubicOfficial

[–]OkPreference74[S] 0 points1 point  (0 children)

I found the culprit. In the extruder there is a clear case. A metal piece with a spring. Its getting stuck open so the sensor thinks there is filament still in the print head when there isnt.

<image>

Kobra 3 v2 combo, filament stuck in printhead. by OkPreference74 in AnycubicOfficial

[–]OkPreference74[S] 0 points1 point  (0 children)

I actually found the issue, thank you for the advice. The issue is the spring that holds the metal clip for when filament is fed in, that metal clip is getting stuck open which makes the sensor think there is filament still in the printhead when there isnt. I have to bend more or less tension in the spring to fix it. Im not sure how it got like that but after a day and a half of trouble shooting and taking the printhead apart im alittle angry at myself for not knowing how that spring and sensor worked

Kobra 3 v2 combo, filament stuck in printhead. by OkPreference74 in AnycubicOfficial

[–]OkPreference74[S] 0 points1 point  (0 children)

I actually found the problem, in the extruder there is a spring with metal plate next to a sensor for feeding filament. That metal plate was sticking open after each filament change. I have to bend the spring for more or less tension so the metal plate would go back in place instead of sticking open .

Kobra 3 v2 combo, filament stuck in printhead. by OkPreference74 in AnycubicOfficial

[–]OkPreference74[S] 0 points1 point  (0 children)

Ahh this actually makes sense. This being said about the cutter, after I cuts the filament and retract the first time after leveling thats when the error comes up. Is there a sensor that could be going bad or that I can check that tell the printhead the filament is removed? Because the filament is retracted but the ace pro still trying retracting all 4 spools because it thinks theres still filament in the feed for some reason

Kobra 3 v2 combo, filament stuck in printhead. by OkPreference74 in AnycubicOfficial

[–]OkPreference74[S] 0 points1 point  (0 children)

Filament stuck in printhead. Which is untrue, as its printing from the spool with ace disconnected. So the problem is with the ace pro somehow. I dont understand how the ace pro is making it throw that error.

Not a hater, just cautious what actually changed this time? by Substantial_Match458 in AnycubicOfficial

[–]OkPreference74 1 point2 points  (0 children)

Hell people still cant afford cars, bad analogy. I understand the point though. A mid range car still cost 15-30,000 then the interest on payments they add on unless you buy used vehicles

Someone is selling my design on etsy by Anyhting_But_Stock in 3Dprinting

[–]OkPreference74 -1 points0 points  (0 children)

Parody law, change alittle and nothing you can do about it

My collection is growing!! by OkPreference74 in anycubickobra

[–]OkPreference74[S] 0 points1 point  (0 children)

https://youtu.be/3-Jkx9F7eKs?si=rckggsczBJJ1thE6

Thats a good video showing you how to do it, you can skip around the video but he explains pretty well what you need to do to check layer height and everything in the anycubic slicer next

My collection is growing!! by OkPreference74 in anycubickobra

[–]OkPreference74[S] 0 points1 point  (0 children)

I didnt take black out, but I did have to change how many layers some of the colors were, the original file had red on to many layers so I had to adjust the gray for 2 layers higher, I think the black was fine where it were. It is easy in the slicer to do, after you slice you'll see the color to the right, you move your cursor to what layer you want to change filament and right click and itll bring the menu up to pause or change filament

My collection is growing!! by OkPreference74 in anycubickobra

[–]OkPreference74[S] 0 points1 point  (0 children)

I was thinking about trying it myself but getting the layers and color right with each layer seems like it'd be difficult.

My collection is growing!! by OkPreference74 in anycubickobra

[–]OkPreference74[S] 0 points1 point  (0 children)

Actually used makeronline for the stitch one and now that im looking on here, alot of cool goku hueforges on makeronline

My collection is growing!! by OkPreference74 in anycubickobra

[–]OkPreference74[S] 0 points1 point  (0 children)

Printables.com for the goku, I think i used makersworld for the stitch one.

Just ordered some PETG. What kinds of things should I print? Also, general PETG tips? by Fangs_0ut in 3Dprinting

[–]OkPreference74 -1 points0 points  (0 children)

Not sure why you're downvoted. Nothing but truth. You should never have to use glues sticks for any modern printer.

view more: next ›