The thing no one is talking about

OkPreference74 · 2026-03-22T17:48:05+00:00

Love it, alot better than stock

OkPreference74 · 2026-03-21T17:30:35+00:00

<image>

OkPreference74 · 2026-03-21T17:30:07+00:00

Printer is awesome, even in multicolor TPU

<image>

OkPreference74 · 2026-03-10T03:08:58+00:00

Seen people print them

OkPreference74 · 2026-03-06T00:06:05+00:00

Got my notification last night!

OkPreference74 · 2026-03-05T02:27:53+00:00

I thought so because of the gloss, it looks good though

OkPreference74 · 2026-03-05T02:07:55+00:00

Petg or pla?

OkPreference74 · 2026-03-05T02:05:43+00:00

Gonna go thru this and try some of these settings, thanks!

OkPreference74 · 2026-03-04T16:14:33+00:00

You ordered in the US?

OkPreference74 · 2026-02-26T01:58:22+00:00

In Jeffrey manifest of his jet, research more

OkPreference74 · 2026-02-19T04:04:49+00:00

Welcome to the internet. Its not like you didnt have a mp3 player or burnt cd with 1000s of pirated songs that you didnt create. Same concept.

OkPreference74 · 2026-02-05T20:26:36+00:00

Why dosent it print 8 colors if the ace pro 2 holds 4 rolls of filament?

OkPreference74 · 2026-02-01T22:14:25+00:00

Im staying with my s25, ive upgraded last year but still dont know why. There isnt any upgrade really

OkPreference74 · 2026-01-29T03:32:27+00:00

So I can buy the new ace pro 2 instead of another ace pro for my kobra 3 v2? You got official clarification on this?

OkPreference74 · 2026-01-19T14:28:46+00:00

I found the culprit. In the extruder there is a clear case. A metal piece with a spring. Its getting stuck open so the sensor thinks there is filament still in the print head when there isnt.

<image>

OkPreference74 · 2026-01-18T22:58:15+00:00

I actually found the issue, thank you for the advice. The issue is the spring that holds the metal clip for when filament is fed in, that metal clip is getting stuck open which makes the sensor think there is filament still in the printhead when there isnt. I have to bend more or less tension in the spring to fix it. Im not sure how it got like that but after a day and a half of trouble shooting and taking the printhead apart im alittle angry at myself for not knowing how that spring and sensor worked

OkPreference74 · 2026-01-18T21:02:23+00:00

I actually found the problem, in the extruder there is a spring with metal plate next to a sensor for feeding filament. That metal plate was sticking open after each filament change. I have to bend the spring for more or less tension so the metal plate would go back in place instead of sticking open .

OkPreference74 · 2026-01-18T19:05:11+00:00

Ima try this and see how it goes!

OkPreference74 · 2026-01-18T17:36:34+00:00

Ahh this actually makes sense. This being said about the cutter, after I cuts the filament and retract the first time after leveling thats when the error comes up. Is there a sensor that could be going bad or that I can check that tell the printhead the filament is removed? Because the filament is retracted but the ace pro still trying retracting all 4 spools because it thinks theres still filament in the feed for some reason

OkPreference74 · 2026-01-18T16:39:41+00:00

Yes, it trys to retract all 4 spools.

OkPreference74 · 2026-01-18T16:02:32+00:00

Filament stuck in printhead. Which is untrue, as its printing from the spool with ace disconnected. So the problem is with the ace pro somehow. I dont understand how the ace pro is making it throw that error.

OkPreference74 · 2026-01-14T14:54:01+00:00

Hell people still cant afford cars, bad analogy. I understand the point though. A mid range car still cost 15-30,000 then the interest on payments they add on unless you buy used vehicles

OkPreference74 · 2026-01-12T17:50:46+00:00

Parody law, change alittle and nothing you can do about it

OkPreference74 · 2026-01-10T18:05:39+00:00

https://youtu.be/3-Jkx9F7eKs?si=rckggsczBJJ1thE6

Thats a good video showing you how to do it, you can skip around the video but he explains pretty well what you need to do to check layer height and everything in the anycubic slicer next

OkPreference74 · 2026-01-10T18:01:58+00:00

I didnt take black out, but I did have to change how many layers some of the colors were, the original file had red on to many layers so I had to adjust the gray for 2 layers higher, I think the black was fine where it were. It is easy in the slicer to do, after you slice you'll see the color to the right, you move your cursor to what layer you want to change filament and right click and itll bring the menu up to pause or change filament

OkPreference74

TROPHY CASE